Professional Documents
Culture Documents
Rough Terrain Hydraulic Crane: Courtesy of Crane - Market
Rough Terrain Hydraulic Crane: Courtesy of Crane - Market
HYDRAULIC CRANE
•••••••••••••••••••••
Courtesy of Crane.Market
Dimensions
47' 1"
(14345 mm)
13' 0.50"
(3975 mm)
19 DEGREES
1' 6.94"
(481 mm)
21 DEGREES
" "
RT875C Weights
GVW Front Rear
lbs kg lbs kg lbs kg
Axle/Tie Allowable Weights 115,000 52,164 60,500 27,443 54,500 24,721
RT875C Basic Machine with 125 ft. boom, 109,107 49,491 59,156 26,833 49,951 22,658
main and auxiliary hoists w/ rope, 35 to 60 ft.
telescopic extension, auxiliary boom nose, 75
ton hookblock and 10-ton headache ball.
REMOVE: Counterweight -11,500 -5,216 5,355 2,429 -16,855 -7,645
REMOVE: 35 to 60 ft. telescopic extension -2,893 -1,312 -4,853 -2,201 1,960 889
REMOVE: 75 ton hookblock -1,711 -533 -2,994 -1,358 1,283 582
REMOVE: 10 ton headache ball -560 -254 -980 -445 420 191
REMOVE: Auxiliary hoist cable -813 -369 379 172 -1,192 -541
SUBSTITUTE: 35 ft. extension -739 -335 -1,240 -562 501 227
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
2 GROVE RT875C
Courtesy of Crane.Market
Working Range
Tele-Swingaway
180
170 35
40 78°
10°
30 MAX
BOOM
20 ANGLE
10 0°
0
160 140 120 100 80 60 40 20
170 150 130 110 90 70 50 30 10 AXIS OF
OPERATING RADIUS IN FEET FROM AXIS OF ROTATION ROTATION
DIMENSIONS ARE FOR
LARGEST GROVE FURNISHED
5' - 6" 7' - 0" HOOK BLOCK AND HEADACHE
BALL, WITH ANTI-TWO
BLOCK ACTIVATED.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
GROVE RT875C 3
Courtesy of Crane.Market
Superstructure Specifications
Boom Swing
40 ft. - 125 ft. (12 m - 38 m) four-section, full power Planetary swing with foot applied multi-disc wet brake.
boom. Maximum tip height: 135 ft. (41 m). Spring applied, hydraulically released swing brake. 360°
positive swing lock and 1 position mechanical house
Lattice Extension lock, operated from cab. Maximum speed: 2.0 RPM.
35 ft. - 60 ft. (10.6 m - 18.2 m) telescoping lattice
swingaway extension offsettable at 2° or 30°. Stows Counterweight
alongside base boom section. Removable: 11,500 lbs. (5 216 kg).
Maximum tip height: 193 ft. (59 m). 2,155 lbs. (977 kg) slab I.P.O. auxiliary hoist.
4 GROVE RT875C
Courtesy of Crane.Market
Carrier Specifications
Chassis Oscillation Lockouts
Box section frame fabricated from high-strength, low Automatic full hydraulic lockouts on rear axle permit
alloy steel. Integral outrigger housings and front/rear oscillation only with boom centered over the front.
towing and tie down lugs.
Brakes
Outrigger System Full air split circuit operating on all wheels. Spring-
Four hydraulic telescoping single-stage double box applied, air released parking brake operating on front
beam outriggers with inverted jacks and integral and rear axles.
holding valves. Three position setting, 0%, 50% and
fully extended. All steel fabricated, quick release type Tires
outrigger floats, 30.5” (775 mm) diameter. Std. 33.25 x 29 - 32PR earthmover type.
Maximum outrigger pad load: 101,524 lbs. (46 050 kg). *Optional: 33.25R29 radial.
GROVE RT875C 5
Courtesy of Crane.Market
RATED LIFTING CAPACITIES IN POUNDS
40 FT. - 125 FT. BOOM
ON OUTRIGGERS FULLY EXTENDED - 360°
#0001
Radius
in Main Boom Length in Feet
Feet
40 45 55 65 75 85 95 105 115 125
150,000 105,000
10
(70) (72.5)
123,500 105,000 94,600
12
(67) (70) (74)
108,000 104,000 88,250 71,050
15
(61.5) (65.5) (70.5) (74)
78,400 77,850 76,350 60,400 55,250 48,150
20
(52.5) (58) (65) (69) (72.5) (75)
59,450 58,950 58,250 56,100 47,950 41,700 38,000 33,350
25
(41.5) (49.5) (58.5) (64.5) (68.5) (71.5) (73.5) (75.5)
46,950 46,550 45,900 45,400 41,950 36,700 33,300 30,750 24,550 *23,700
30
(26) (39.5) (52) (59) (64) (67.5) (70.5) (72.5) (75) (76.5)
37,700 37,150 36,700 36,250 32,600 29,550 27,300 21,700 21,900
35
(26) (44.5) (53.5) (59.5) (64) (67) (69.5) (72) (74)
See 30,300 30,100 30,750 29,000 26,450 24,450 19,350 20,300
40
Note 16 (35.5) (47.5) (54.5) (60) (63.5) (66.5) (69.5) (71.5)
24,450 23,800 24,300 25,350 23,850 22,000 17,450 18,800
45
(23) (40.5) (49.5) (55.5) (60) (63.5) (66.5) (69)
19,150 19,550 20,550 21,300 19,850 15,800 17,050
50
(32.5) (44) (51.5) (56.5) (60.5) (64) (66.5)
13,050 14,000 14,950 15,400 13,250 14,150
60
(30) (41.5) (48.5) (53.5) (58) (61.5)
9,730 10,650 11,100 11,400 11,850
70
(28.5) (39) (46) (51.5) (55.5)
7,640 8,060 8,440 8,800
80
(27) (37) (44.5) (49.5)
5,740 6,110 6,460
90
(25.5) (36) (42.5)
4,280 4,580
100
(25) (34.5)
3,090
110
(24)
Minimum boom angle (deg.) for indicated length (no load) 0
Maximum boom length (ft. ) at 0 degree boom angle (no load) 125
NOTE: ( ) Boom angles are in degrees. A6-829-101242A
*Based on maximum obtainable boom angle.
#LMI operating code. Refer to LMI manual for operating instructions.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
6 GROVE RT875C
Courtesy of Crane.Market
35 FT. FIXED LENGTH OFFSETTABLE BOOM EXTENSION
ON OUTRIGGERS FULLY EXTENDED - 360°
35 ft. LENGTH 1. All capacities above the bold line are based on
Radius
in
#0051 #0053 structural strength of boom extension.
Feet 2° 30°
OFFSET OFFSET
2. 35 ft. boom extension length may be used for
single line lifting service only.
*12,900
40
(77) 3. Radii listed are for a fully extended boom with the
45
11,900 boom extension erected. For main boom lengths
(75.5) less than fully extended, the rated loads are
11,200 determined by boom angle. Use only the column
50
(73.5)
which corresponds to the boom extension length
10,600 *7,800 and offset for which the machine is configured.
55
(71.5) (77)
For boom angles not shown, use the rating of the
10,050 7,530 next lower boom angle.
60
(69.5) (74.5)
9,650 7,410 WARNING: Operation of this machine with heavier
65
(67.5) (72.5) loads than the capacities listed is strictly prohib-
70
9,110 7,280 ited. Machine tipping with boom extension occurs
(65.5) (70.5) rapidly and without advance warning.
8,700 7,160
75 4. Boom angle is the angle above or below horizon-
(63.5) (68)
8,330 7,050 tal of the longitudinal axis of the boom base
80 section after lifting rated load.
(61.5) (66)
7,990 6,950 5. Capacities listed are with outriggers fully ex-
85
(59) (64)
tended and vertical jacks set only.
7,330 6,850
90
(57) (61.5) 6. 35 FT. FIXED LENGTH BOOM EXTENSION
6,330 6,330 WARNING: For main boom length greater than
95
(54.5) (59) 105 ft. with 35 ft. boom extension in working
100
5,450 5,450 position, the boom angle must not be less than
(52.5) (56.5) 27.5° since loss of stability will occur causing a
4,660 4,660 tipping condition. The boom angle is not re-
105
(50) (54) stricted for main boom length equal to or less
3,950 3,950 than 105 ft. This warning also applies for boom
110
(47.5) (51.5)
extension erection purposes.
3,310 3,310
115
(44.5) (48.5)
2,730 2,730
120
(41.5) (45.5)
2,200 2,200
125
(38.5) (42.5)
1,710 1,710
130
(35.5) (38.5)
1,270 1,270
135
(31.5) (34.5)
A6-829-012285
NOTE: ( ) Boom angles are in degrees.
*This capacity is based upon maximum boom angle.
#LMI operating code. Refer to LMI manual for instructions.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
GROVE RT875C 7
Courtesy of Crane.Market
RATED LIFTING CAPACITIES IN POUNDS
WITH 35 FT. - 60 FT. TELE-OFFSETTABLE BOOM EXTENSION
ON OUTRIGGERS FULLY EXTENDED - 360°
35 ft. LENGTH 60 ft. LENGTH 1. All capacities above the bold line are based on
Radius
in #0021 #0023 #0041 #0043 structural strength of boom extension.
Feet
2° OFFSET 30° OFFSET 2° OFFSET 30° OFFSET
*12,900
2. 35 ft. and 60 ft. boom extension lengths may be
40 used for single line lifting service only.
(77)
11,600
45
(75.5) 3. Radii listed are for a fully extended boom with the
10,900 *6,700 boom extension erected. For main boom lengths
50
(73.5) (77) less than fully extended, the rated loads are
55
10,300 *7,500 6,320 determined by boom angle. Use only the column
(71.5) (77) (75)
which corresponds to the boom extension length
9,750 7,250 6,000
60
(69.5) (74.5) (73.5) and offset for which the machine is configured.
9,250 7,110 5,630 For boom angles not shown, use the rating of the
65
(67.5) (72.5) (71.5) next lower boom angle.
8,810 6,980 5,260
70
(65.5) (70.5) (70) WARNING: Operation of this machine with
75
8,400 6,860 4,900 *4,000 heavier loads than the capacities listed is strictly
(63.5) (68) (68.5) (77)
prohibited. Machine tipping with boom extension
8,030 6,750 4,630 3,700
80
(61.5) (66) (66.5) (74.5) occurs rapidly and without advance warning.
7,690 6,650 4,360 3,500
85
(59) (64) (65) (73)
4. Boom angle is the angle above or below horizon-
6,840 6,560 4,100 3,350
tal of the longitudinal axis of the boom base
90
(57) (61.5) (63) (71) section after lifting rated load.
5,840 5,840 3,800 3,270
95 5. Capacities listed are with outriggers fully ex-
(54.5) (59) (61) (69)
4,950 4,950 3,640 3,210 tended and vertical jacks set only.
100
(52.5) (56.5) (59.5) (67)
4,160 4,160 3,490 3,150 6. 35 FT. TELE OFFSETTABLE BOOM EXTEN-
105
(50) (54) (57.5) (65) SION WARNING: For main boom length greater
110
3,450 3,450 3,350 3,100 than 105 ft. with 35 ft. tele. boom extension in
(47.5) (51.5) (55.5) (63)
working position, the boom angle must not be
2,810 2,810 3,220 3,050
115
(44.5) (48.5) (53.5) (61) less than 32.5° since loss of stability will occur
2,230 2,230 3,100 3,010 causing a tipping condition. The boom angle is
120
(41.5) (45.5) (51) (58.5) not restricted for main boom length equal to or
125
1,700 1,700 2,990 2,970 less than 105 ft. This warning also applies for
(38.5) (42.5) (49) (56.5)
boom extension erection purposes.
1,210 1,210 2,770 2,770
130
(35.5) (38.5) (47) (54)
60 FT. TELE OFFSETTABLE BOOM EXTEN-
2,290 2,290
135
(44.5) (51.5)
SION WARNING: For main boom length greater
1,850 1,850 than 95 ft. with 60 ft. tele. boom extension in
140
(42) (48.5) working position, the boom angle must not be
145
1,450 1,450 less than 35° since loss of stability will occur
(39.5) (46)
causing a tipping condition. The boom angle is
1,070 1,070
150
(36.5) (42.5) not restricted for main boom length equal to or
NOTE: ( ) Boom angles are in degrees. A6-829-011806A less than 95 ft. This warning also applies for
*This capacity is based upon maximum boom angle.
boom extension erection purposes.
#LMI operating code. Refer to LMI manual for instructions.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
8 GROVE RT875C
Courtesy of Crane.Market
RATED LIFTING CAPACITIES ON RUBBER WITH 33.25x29 TIRES
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
GROVE RT875C 9
Courtesy of Crane.Market
RATED LIFTING CAPACITIES ON RUBBER WITH 33.25x29 TIRES (cont'd.)
PICK & CARRY CAPACITIES - UP TO 2.5 MPH
BOOM CENTERED OVER FRONT
#9006
Radius
in Main Boom Length in Feet
Feet
40 45 55 65 75 85 95
87,650 84,400
10
(70.5) (73)
76,500 74,250 69,200
12
(67.5) (70.5) (74.5)
63,700 63,500 56,400 52,100
15
(62.5) (66) (71) (74.5)
48,850 48,650 43,700 38,300 38,300 30,100 21,400
20
(53.5) (58.5) (65) (69.5) (72.5) (75) (77)
32,650 32,400 31,900 30,100 30,100 27,150 21,400
25
(42.5) (50) (59) (64.5) (68.5) (71.5) (74)
23,200 22,950 22,250 22,100 22,850 24,000 21,400
30
(28) (40) (52) (59.5) (64) (68) (70.5)
16,850 16,500 16,100 16,750 17,850 18,900
35
(26.5) (44.5) (54) (59.5) (64) (67.5)
12,250 11,950 12,550 13,550 14,500
40
(35.5) (47.5) (55) (60) (64)
9,140 8,870 9,450 10,350 11,300
45
(23.5) (41) (50) (56) (60.5)
6,510 7,070 7,950 8,840
50
(32.5) (44) (51.5) (56.5)
3,650 4,470 5,290
60
(30) (41.5) (48.5)
2,180 2,870
70
(28.5) (39.5)
1,120
80
(27)
NOTE: ( ) Boom angles are in degrees. A6-829-012280
Main Boom
No Load Stability Data 95 ft.
Front Min. boom angle (deg.) for indicated length 30
(No Load) Max. boom length (ft.) at 0 deg. boom angle 75
360 Deg. Min. boom angle (deg.) for indicated length 56.5
(No Load) Max. boom length (ft.) at 0 deg. boom angle 45
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
10 GROVE RT875C
Courtesy of Crane.Market
Diagram Of Working Area
CENTERLINE
360° OF OUTRIGGER
OVER SUPPORT
SIDE
CENTERLINE
OF BOOM
LONGITUDINAL
CENTERLINE
OF CRANE
CG OF OVER + + OVER
LOAD FRONT REAR
SEE NOTE
AT BOTTOM
LIFTING ON
OUTRIGGERS OVER
SIDE CENTERLINE
OF ROTATION
6°
12°
FRONT
LIFTING C6-829-003529
ON TIRES C6-829-001159
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
GROVE RT875C 11
Courtesy of Crane.Market
Grove Worldwide - World Grove Asia/Pacific - Representative
Headquarters Office
Western Hemisphere, Asia/Pacific Asia/Pacific, Near East
1565 Buchanan Trail East 171 Chin Swee Road
P.O. Box 21 #10-09 San Centre
Shady Grove, Pennsylvania 17256-0021, Singapore 16987
USA Tel: [Int + 65] 536-6112
Tel: [Int + 1] (717) 597-8121 Fax: [Int + 65] 536-6119
Fax: [Int + 1] (717) 597-4062
Grove China - Representative Office
Grove Europe Limited* Room 713, Towercrest Plaza
Europe, Africa, Middle East No. 3 Mai Zi Dian West Road
(Sales & Marketing) Chao Yang District
1 Emperor Way Beijing, China 100016
Doxford International Business Park Tel: [Int + 86] (10) 64 67 16 90
Sunderland SR3 3XR, England Fax: [Int + 86] (10) 64 67 16 91
Tel: [Int + 44] (191) 515-7253
Fax: [Int + 44] (191) 564-0442 Grove Middle East
P.O. Box 290
Grove Europe Limited* Dubai, United Arab Emirates
UK & EIRE (Sales & Service) Tel: [Int + 971] (4) 3484478
Telford Road, Bicester Fax: [Int + 971] (4) 3484478
Oxfordshire OX6 0TZ, England
Tel: [Int + 44] (1869) 878-890 Lifetime Customer Support
Fax: [Int + 44] (1869) 878-891 Western Hemisphere, Asia/Pacific
1086 Wayne Avenue
Deutsche Grove GmbH Chambersburg, Pennsylvania 17201
Germany (Sales & Service) USA
Helmholtzstrasse 12, Postfach 5026 Tel: [Int + 1] (717) 263-5100
D-40750 Langenfeld, Germany Fax: [Int + 1] (717) 267-0404
Tel: [Int + 49] (2173) 8909-0
Fax: [Int + 49] (2173) 8909-30 Europe, Africa, Middle East
Grove Europe Limited*
Deutsche Grove GmbH 1 Emperor Way
Wilhelmshaven Works Doxford International Business Park
Industriegelande West, Postfach 1853 Sunderland SR3 3XR, England
D-26358 Wilhelmshaven, Germany Tel: [Int + 44] (191) 565-6281
Tel: [Int + 49] (4421) 294-0 Parts Fax: [Int + 44] (191) 515-7475
Fax: [Int + 49] (4421) 294-301 Service Fax: [Int + 44] (191) 515-7340
http://www.groveworldwide.com
Distributed By:
Constant improvement and engineering progress make it necessary that we reserve the right to make
specification, equipment, and price changes without notice. Illustrations shown may include optional
equipment and accessories and may not include all standard equipment.
GROVE® and GROVE LOGO are registered trademarks of GROVE in the U.S. and/or other countries.
Copyright© 2000 GROVE. All rights reserved.