The document appears to be a table providing unit rates for various types of bridge bearings. It lists 4 types of bearings - forged steel roller, sliding plate, elastomeric, and POT-PTFE bearings. For each bearing type it provides the description, unit of measurement, plain and sub-mountainous labor rates, and plain and sub-mountainous through rates.
The document appears to be a table providing unit rates for various types of bridge bearings. It lists 4 types of bearings - forged steel roller, sliding plate, elastomeric, and POT-PTFE bearings. For each bearing type it provides the description, unit of measurement, plain and sub-mountainous labor rates, and plain and sub-mountainous through rates.
The document appears to be a table providing unit rates for various types of bridge bearings. It lists 4 types of bearings - forged steel roller, sliding plate, elastomeric, and POT-PTFE bearings. For each bearing type it provides the description, unit of measurement, plain and sub-mountainous labor rates, and plain and sub-mountainous through rates.
No. Labour Through Labour Through Rate Rate Rate Rate 1 2 3 4 5 6 7 21.39 Supplying, fitting and fixing in position true to line and level forged steel roller bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all Per accessories as per drawing and tonne Technical Specifications. cap. 1.15 834.54 1.27 834.66 21.40 Supplying, fitting and fixing in position true to line and level sliding plate bearing with PTFE surface sliding on stainless steel complete including all accessories as per drawing and Technical Specifications and BS: 5400, section 9.1 & 9.2 (for PTFE) and Per clause 2004 of MoRTH Specifications. tonne cap. 3.60 220.17 3.96 220.53 21.41 Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications. cu cm 0.02 0.54 0.02 0.54 21.42 Supplying, fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MORTH Specifications complete as per drawing and approved Technical Per Specifications. tonne cap 1.51 142.28 1.66 142.43
IJM Corporation BHD Project: Four Laning of Jhansi-Lakhnadon Section KM 132-187.8 (Upto Start of Sagar Bypass) of NH-26 in The State of Madhya Pradesh: Civil Work Contract Package No. ADB-II/C-4