Professional Documents
Culture Documents
Blackbody Manual-Banovision
Blackbody Manual-Banovision
shock!
Do not change the range of the black body radiation source without
accident!
without authorization!
!Note
guidelines:
Only for indoor use without obvious air convection and bright light
2
exposure, and the environment should be free from strong
The area around the device should be reserved for cooling space,
and the distance between the surrounding objects is not less than
10 cm.
(whether or not used within five years) after five years from the
1. Introduction
Thank you for choosing the black body radiation source produced by
The radiation target surface uses high emission rate aerial coatings.
3
2. Product interface
radiation surface
3. Technical indicators
Effective radiation
φ70mm
surface
4
Power 220VAC 50Hz
Dimensions 154*133*152mm
4. Procedure
4.1 Connection:
Plug one end of the factory-configured power cord into the power
outlet on the rear panel of the device and plug the other end into the
4.2 Power on
4.3 Shutdown
When the operation is finished, turn off the power switch on the
5. Calibration
5
it is recommended that the equipment be sent to a qualified metering
year.
6. Maintenance
Use a soft brush to clean the dust from the black body radiation
the warranty.