General Rules (Contd.)
Grouping of a3(b) (4). Small (i.e. not exceeding 250 millimetres in
sizes (contd.) depth).
(4i) Large (i.e. over 250 millimetres but not
exceeding 500 millimetres in depth).
(iii) Extra Large (i.e. over 500 millimetres in
depth).
(c) Where this document requires the sizes of pipes and
tubes (measured internally) and of bars, cables,
conduits, standards and the like (measured externally)
to be stated in accordance with this paragraph,
they shall be grouped and described as follows:
(i) small (i.e, not exceeding 55 millimetres
diameter).
(ii) Large (i.e. over 55 millimetres but not
exceeding 110 millinetres diameter).
(481) Extra Large (i.e. over 110 millimetres
diameter).
Quantities Aa(a) Where the unit of billing is the metre, quantities
hall de Dilled to the nearest vhole unit. Fractil
of a unit less than half shall be disregarded and
all other fractions shall be regarded as whole unit.
(>) Where the unit of billing is the kilograme, quantities
shall be billed to the nearest vhole unit. Fractions
of a unit less than half shall be disregarded and all
other fractions shall be regarded as whole units.
(c) Where the application of this Clause vould cause an
entire item to be eliminated, such item shall be
enumerated stating the size or veight as appropriate.
ms
Preambles A5 ‘The preambles given at the beginning of each section
may be given at the beginning of the Bills of
Quantities.
eae