Professional Documents
Culture Documents
ACE-A1.2.75q: Number: ACE-A1.2 Passing Score: 800 Time Limit: 120 Min
ACE-A1.2.75q: Number: ACE-A1.2 Passing Score: 800 Time Limit: 120 Min
ACE-A1.2.75q: Number: ACE-A1.2 Passing Score: 800 Time Limit: 120 Min
75q
Number: ACE-A1.2
Passing Score: 800
Time Limit: 120 min
https://www.gratisexam.com/
ACE-A1.2
https://www.gratisexam.com/
Exam A
QUESTION 1
On EOS 4.13.1F, which of the following statements are true in regards to Arista’s Tap Aggregation feature? (Select two)
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/danz-tap-aggregation-configuration-getting-started/#Ports_and_Groups
QUESTION 2
Where does Aboot look for the boot system image at boot time?
https://www.gratisexam.com/
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.safaribooksonline.com/library/view/arista-warrior/9781449358921/ch18.html
QUESTION 3
https://www.gratisexam.com/
When ZTP is in enable node, what triggers ZTP when the switch boots?
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/ztp-set-up-guide/#ZTP_Boot
QUESTION 4
Which of the following are valid Event Manager triggers?
A. on-boot
B. on-schedule
C. on-startup-config
D. on-reload
Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/introduction-to-managing-eos-devices-automation-and-extensibility/#521_Event_Manager
QUESTION 5
Which of the following Arista switch series’ supports Zero Touch Provisioning (ZTP)?
A. 7050
B. 7280E
C. 7300
D. 7500E
Correct Answer: D
https://www.gratisexam.com/
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/ztp-set-up-guide/ (see introduction)
QUESTION 6
Which command would you use to change the SSH Idle timeout after entering the ‘management ssh’ command?
A. idle-timeout <minutes>
B. timed <minutes>
C. timeout <minutes>
D. ssh-idle <minutes>
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.arista.com/en/um-eos-4172f/eos-section-2-5-session-management-commands#ww1129658
QUESTION 7
What would be the result of issuing a reload command on one of the two switches peered together in an MLAG domain where both switches are running EOS
version 4.14.1F?
A. Dual-homed hosts lose 50% of network capacity through the MLAG domain while the switch reboots
B. The peer switch also reboots to ensure network stability.
C. The peer switch sends out gratuitous BPDUs to let the network know that it has assumed the root-bridge role.
D. Nothing bad ever happens when MLAG is enabled!
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 8
On an Arista switch, which port is used to connect a laptop to the switch for initial configuration or password recovery?
https://www.gratisexam.com/
A. Ethernet 1
B. Console
C. Management 1
D. Ethernet 1/1
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 9
How many Arista switches may be a part of a single MLAG domain?
https://www.gratisexam.com/
A. 2
B. 4
C. 8
D. 16
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/vxlan-routing-with-mlag/
QUESTION 10
Which of the following are not valid boot-config file entries?
A. NETGW=192.168.1.1
B. IMAGE-flash:EOS-4.12.1.swi
https://www.gratisexam.com/
C. SWI=flash:EOS-4.12.1.swi
D. SWIX=flash:EOS-4.12.1.swi
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://books.google.com.pk/books?id=SFMuNdeVXswC&pg=PA235&lpg=PA235&dq=Arista+EOS+boot-config+file+entries&source=bl&ots=Wzz7--
D5ms&sig=4jroImKwuPHiL1waXg6W2wlRo-g&hl=en&sa=X&redir_esc=y#v=onepage&q=Arista%20EOS%20boot-config%20file%20entries&f=false
QUESTION 11
What is the default spanning-tree mode on an Arista switch?
A. STP is disabled
B. PVST
C. RPVST
D. MST
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.arista.com/ko/um-eos-4172f/eos-section-21-3-configuring-a-spanning-tree
QUESTION 12
On what interface(s) will ZTP send out requests?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
https://www.gratisexam.com/
QUESTION 13
After configuration and enabling XMPP, what command can be used to verify its status?
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 14
Arista MLAG uses which of the following protocols for inter-switch communication?
A. BGP
B. IEEE 1588
C. STP
D. None of the above
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/mlag-basic-configuration/
QUESTION 15
In EOS, what is the default MLAG heartbeat interval?
A. 3600 seconds
B. 2 seconds
C. 5 minutes
D. 300 seconds
https://www.gratisexam.com/
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/mlag-basic-configuration/
QUESTION 16
Which of the following Arista switches support LANZ?
A. 7010
B. 7150
C. 7500E
D. 7048T
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/latency-analyzer-lanz-architectures-and-configuration/#5_LANZ_lite_7500_and_7048T
QUESTION 17
Many Arista switches support reversible air flow. When the fans installed on such a switch have red handles, which of the following statements would be correct?
A. Cold air will be pulled in from the port side of the switch.
B. Warm air will be pulled in from the starboard side of the switch.
C. Hot air will be pulled in from the fan side of the switch.
D. Hot air will be ejected from the fan side of the switch.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.arista.com/assets/data/docs/Manuals/QSG/QS_7000-Gen3_Color.pdf (page 5)
QUESTION 18
https://www.gratisexam.com/
What is the first command necessary when configuring SSH after entering global configuration mode?
A. management
B. line vty
C. line ssh
D. management ssh
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 19
Which of the following is not a DANZ feature?
https://www.gratisexam.com/
A. Tap Aggregation
B. Agile Ports
C. Advanced Mirroring
D. MLAG
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/data-analyzer-danz-glossary/
QUESTION 20
Which of the following statements is false?
A. You can run bash commands from CLI with the bash command.
https://www.gratisexam.com/
B. You can run CLI commands from bash with the Cli command.
C. You can run CLI commands from bash with the FastCli command.
D. You can run CLI commands from CLI with the Cli command.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 21
Where does SysDB store its contents when the switch reboots?
A. flash:
B. /mnt/flash
C. /home/admin
D. none of the above
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 22
What is the name of the link that connects two Arista switches together to form an MLAG domain?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
https://www.gratisexam.com/
Reference: https://eos.arista.com/mlag-basic-configuration/
QUESTION 23
What does the asterisk in the following output signify?
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 24
What is the fundamental purpose of SysDB?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://github.com/aristanetworks/EosSdk/wiki/Understanding-EOS-and-Sysdb
https://www.gratisexam.com/
QUESTION 25
What is Adaptive Segmentation?
A. The ability for VMTracer to dynamically create VLANs based on the VLANs in use on VMs.
B. The ability to support multiple vCenter instances.
C. The ability for an Arista switch to run VMs on the switch itself.
D. The ability to split the switch into multiple virtual switches.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.arista.com/assets/data/pdf/TechBulletins/VMTracerOverview.pdf (page 4)
QUESTION 26
Does Arista EOS firmware support U.S. Federal Information Processing Standards (FIPS) and Common Criteria (CC) security requirements?
A. Yes
B. No
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.arista.com/assets/data/docs/Manuals/EOS-4.15.4F-Manual.pdf (page 118)
QUESTION 27
Arista switches automatically issue a show tech support once every hour, saving the results to files on flash. How many of these files are retained by default?
A. 10
B. 50
C. 100
D. 150
Correct Answer: C
Section: (none)
https://www.gratisexam.com/
Explanation
Explanation/Reference:
QUESTION 28
Which of the following interface types are never found on an Arista switch?
A. management
B. console
C. Ethernet
D. auxiliary
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 29
If an agent were to suffer a catastrophic failure and die, what process would restart it?
A. SysDB
B. ProcMgr
C. Stp
D. SysMgr
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/restarting-eos-agents/
QUESTION 30
If you were build a large-scale cloud-based architecture that required 100% efficient cell-based fabric, Virtual Output Queuing (VOQ), and 3.84 Tbps capacity per
slot, which Arista switch series would be the correct choice?
https://www.gratisexam.com/
A. 7010T
B. 7500E
C. 7300
D. 7150
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.arista.com/en/products/7500-series
QUESTION 31
What is the name of the Arista EOS feature that allows you to set triggers and perform actions on those triggers?
A. Event Manager
B. Event Monitor
C. Event Trigger
D. Event History
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/introduction-to-managing-eos-devices-automation-and-extensibility/
QUESTION 32
Given the following output, which of the following have you likely configured?
https://www.gratisexam.com/
A. Advanced Mirroring with Packet Truncation
B. Advanced Mirroring with ACLs
C. Agile Ports
D. Buffer Tuning
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 33
What command configuration mode enabled you to connect to an Arista Switch via HTTPS for services such as Tap Aggregation?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/arista-eapi-101/
QUESTION 34
Which Arista switch series supports more than eight line cards?
A. 7050
B. 7250QX
C. 7500
D. 7300
Correct Answer: D
Section: (none)
Explanation
https://www.gratisexam.com/
Explanation/Reference:
Reference: https://www.arista.com/en/products/switches
QUESTION 35
When configuring MLAG, Arista recommends that the trunk group command be used on the VLAN used for MLAG peer communication. What is the purpose of the
trunk group command?
A. It groups all the trunks together so that they can traverse the peer-link properly.
B. It groups the MLAG interfaces together so that they can be reported on both peers.
C. It prevents the configured VLAN from leaking out onto other trunks.
D. It ensures that the configured VLAN will be included on all trunks.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 36
In what file might “DISABLE=True” be found on a switch with no other configuration?
A. mlag-config
B. zerotouch-config
C. api-config
D. eapi-config
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 37
What is the name of the feature that allows you to retrieve the output of CLI commands in JSON format?
A. XMPP
https://www.gratisexam.com/
B. DANZ
C. LANZ
D. eAPI
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/arista-eapi-101/
QUESTION 38
When you fullrecover a switch from Aboot and a USB drive is present in the USB port of the switch, which of the following statements is true?
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/password-recovery-return-to-factory-default/ (how to prepare the USB drive)
QUESTION 39
Why is FastCli faster than Cli?
A. FastCli utilizes an always-running agent to process the submitted command and return the output.
B. FastCli is not faster than Cli, though the name might suggest otherwise.
C. FastCli is written in C++ while Cli is written in Perl.
D. FastCli uses special engrams from the M5.
Correct Answer: A
Section: (none)
Explanation
https://www.gratisexam.com/
Explanation/Reference:
QUESTION 40
Which of the following commands is being deprecated and will not be supported in the near future?
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 41
The Arista MLAG domain ID is:
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.arista.com/assets/data/pdf/user-manual/um-eos-4172f/Chapters/um-eos-4172f_Multi-Chassis%20Link%20Aggregation.pdf (page 2)
QUESTION 42
Which of the following programming environments is included in every version of EOS out of the box?
A. Perl
B. Python
C. PHP
https://www.gratisexam.com/
D. Ruby
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.arista.com/en/products/eos
QUESTION 43
What service does the MLAG feature provide?
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 44
What is the command to set the switch to use EOS 4.15.1F.swi the next time it reloads?
https://www.gratisexam.com/
Correct Answer: A
https://www.gratisexam.com/
Section: (none)
Explanation
Explanation/Reference:
QUESTION 45
True or False: When ZTP has been placed in cancel mode, you must issue the write memory command to prevent ZTP from triggering again.
A. TRUE
B. FALSE
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 46
To upgrade the EOS running on an Arista switch, which of the following commands copies the new EOS file from USB to flash?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 47
Which of the following statements are true?
A. VMTracer’s Adaptive Segmentation feature will automatically add or prune VLANs learned from vCenter from every trunk between two known ESXi hosts so
long as they are connected using Arista switches.
https://www.gratisexam.com/
B. VMTracer’s Adaptive Segmentation feature will automatically add or prune VLANs learned from vCenter from the trunks connecting to the local switch on which
the local ESXi host is connected.
C. VMTracer’s Adaptive Segmentation feature will automatically add or prune VLANs learned from vCenter everywhere in the network.
D. VMTracer’s Adaptive Segmentation feature will automatically add or remove VLANs on the switch, but it does not add or prune VLANs from trunks.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 48
What must be active on the VMware side in order for EOS to have visibility into vNIC counters?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 49
Which Arista switch series shares fans with the Arista 7300 chassis switches?
A. 7500E
B. 7150
C. 7010
D. 7250QX
Correct Answer: D
Section: (none)
Explanation
https://www.gratisexam.com/
Explanation/Reference:
QUESTION 50
On an Arista switch, what is the default username and password?
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/securing-eos-cli/
QUESTION 51
Which command below is valid to use as a way to verify the status of the MLAG peer-link?
A. show mlag
B. show mlag interface
C. show mlag peer-link
D. show mlag detail
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/mlag-basic-configuration/#Verify_spanning-tree_on_both_MLAG_peers
QUESTION 52
If the SWI= statement in the boot-config file is invalid, what will happen when the switch reboots?
A. The switch will not boot EOS, and will instead enter Aboot.
B. The switch will load the first SWI image it finds on flash:
C. The switch will power off.
https://www.gratisexam.com/
D. The switch will reboot itself and try again.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 53
Which of the following statements are true?
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.arista.com/assets/data/pdf/TechBulletins/VMTracerOverview.pdf ( page 3)
QUESTION 54
What is the EOS command that allows Arista switches with Multi-switch CLI enabled to send interactive commands to multiple switches at once?
A. xmpp group
B. xmpp send switch-group
C. xmpp session <switch-group name>
D. xmpp session-name <session name>
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.arista.com/en/um-eos-4172f/eos-section-2-5-session-management-commands
https://www.gratisexam.com/
QUESTION 55
What is the packet overhead for a VXLAN-encapsulated frame?
A. 10 bytes
B. 30 bytes
C. 50 bytes
D. 70 bytes
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 56
Which of the following commands can you use to see which EOS versions are stored on the switch’s flash drive (assuming a freshly booted switch)?
A. dir flash
B. bash ls /mnt/flash
C. dir
D. all of the above
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: http://arisq.ylb.jp/documents/bootimage
QUESTION 57
On what protocol is Multi-Switch CLI based?
A. TELNET
B. SCP
C. SSH
D. XMPP
https://www.gratisexam.com/
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 58
True or False: When configured as an MLAG domain, the Arista switches use the same MLAG System ID.
A. TRUE
B. FALSE
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 59
What does Arista use as a filename extension when creating EOS extensions?
A. .swix
B. .ext
C. .extension
D. .swx
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/packaging-and-installing-eos-extensions/
QUESTION 60
What is the default location of EOS log files in Linux?
https://www.gratisexam.com/
B. /var/log/
C. flash:
D. /mnt/flash/
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 61
What is the benefit of the watch diff CLI command?
A. It allows you to watch differential equation algorithms when they’re being evaluated in a hadoop cluster.
B. It allows you to view the skew rate between two clock sources when using NTP.
C. It allows you to view the skew rate between two clock sources when using IEEE 1588 Precision Time Protocol.
D. It allows you to automatically reissue any CLI command at set intervals while highlighting the differences from the last iteration of that command.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 62
What are the three types of LANZ updates?
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
https://www.gratisexam.com/
Explanation:
LANZ operates by setting threshold values on the interface and global buffer pools and then generates records for the start and end events causing those threshold
values to be exceeded. Update records are also generated when buffer use exceeds those thresholds for a prolonged period of time.
Reference: https://eos.arista.com/latency-analyzer-lanz-architectures-and-configuration/
QUESTION 63
Which of the following are valid ZTP modes? (Choose two.)
A. Disable
B. Enable
C. Off
D. On
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 64
Which password setting controls the Privilege Exec mode on an Arista switch?
A. boot password
B. enable secret
C. management secret
D. enable
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 65
If you have an Arista switch with SFPs, which command will show the temperature of those SFPs?
https://www.gratisexam.com/
B. show interfaces
C. show interfaces status
D. show sfp monitor
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.arista.com/ko/um-eos/eos-section-10-6-ethernet-configuration-commands
QUESTION 66
On an Arista switch, what two commands can you use to write your changes from the running-configuration to the startup-configuration?
A. write
B. copy running-config startup-config
C. save
D. save memory
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 67
Arista Switches employ which of the following?
Correct Answer: A
Section: (none)
Explanation
https://www.gratisexam.com/
Explanation/Reference:
QUESTION 68
What physical interface is always a layer-3 interface on an Arista switch?
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Reference: https://www.arista.com/ko/um-eos/eos-section-10-4-interfaces
QUESTION 69
True or False; you should disable Spanning-Tree on the Arista MLAG peer link VLAN?
A. FALSE
B. TRUE
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 70
With two switches in an MLAG domain, which of the following commands is a legitimate way to make interfaces on one of the peers part of mlag 43?
A. Peer-1(config-if-Po43) #mlag 43
B. Peer-1(config-if-Et43) #mlag 43
C. Peer-1(config-if-Vl43) #mlag 43
D. There can only be 32 MLAGs on a switch, so MLAG 43 is impossible.
https://www.gratisexam.com/
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 71
What can you assume about Ethernet1 in this output from a 7150-24 that have been configured with the tap aggregation mode exclusive command?
A. Ethernet1 is broken.
B. Ethernet1 has a QSPF interface.
C. Ethernet1 is an Agile Port.
D. Ethernet1 will not work with Tap Agg.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 72
What is the command to make sure that all installed extensions are loaded when the switch reboots?
https://www.gratisexam.com/
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Reference: https://eos.arista.com/packaging-and-installing-eos-extensions/
QUESTION 73
Which of the following commands will show the currently running version of EOS?
A. show version
B. show version detail
C. bash more /etc/Eos-release
D. all of the above
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 74
Which of the following schedule commands will not be accepted by the parser?
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 75
https://www.gratisexam.com/
What distribution of Linux is EOS 4.14.1F built upon?
A. Ubuntu
B. Fedora
C. CentOS
D. SuSE
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
https://www.gratisexam.com/
https://www.gratisexam.com/