Professional Documents
Culture Documents
Sip 8 P
Sip 8 P
Specification Description
Table 61-1/2 x 40-1/2"
Number of t-slots 10
Hydraulic travel 52"
Additional hand travel for fine setting 4"
Nominal measuring travel 55"
Milling feeds up to 12 ipm
Verticle spindle saddle travel 40"
Verticle spindle head taper SIP 50 taper
Verticle spindle quill travel 12"
Verticle spindle speeds (18) 40-2000 rpm
Distance from table top to verticle spindle nose 38-1/4"
1 ea Center point
1 extension bar
1 ea SIP facing head, model P50 S/N 959, with extra large slide up to 14-1/8”
dia.
1 ea Reduction sleeve S/4 No. 4 Morse taper with screw clamping – SIP Taper
1 ea SIP 50 taper / Morse #4 reduction sleeve incl. End mill collet holder
1 ea SIP 50 taper reduction sleeve with #40 taper to drive a reduction geared
head
1 ea DeVlieg reduction gear head with 40 taper high speed milling, S/N 3.8-
16077
2 ea Box with various kinds of cutting tool bits for various boring heads
1 ea SIP Rotoptic #6 optical dividing table with settings on built-in master circle
(laboratory condition)
Including:
1 ea. Complete box with center arbor, spanners, spare bulbs, etc.
1 ea. Telescopic extension
Remember
file:///C|/0%200%200AMAZING%20PIX%202005/THE/fritzs%20stuff/Fback.htm5/12/2005 2:25:16 AM