Professional Documents
Culture Documents
By Tuan Norhayati Tuan Chik
By Tuan Norhayati Tuan Chik
By Tuan Norhayati Tuan Chik
S2-2019/2020
By
TUAN NORHAYATI TUAN CHIK
STAIRCASE DESIGN
Q1:
What are the values of R (riser) and G (going) for
public and private building in terms of the comfortness
of designing the staircase?
STAIRCASE DESIGN
Q2:
Calculate the average thickness of the staircase.
Given: R= 175 mm, G= 255 mm, h= 110 mm
STAIRCASE DESIGN
Q3:
Draw the bending moment diagram for this staircase.
FRAME DESIGN
Q4:
Sketch two types of frame and describe the differences
between them.
FRAME DESIGN
Q5:
List seven (7) step analysis of the complete frame.
FRAME DESIGN
Q6:
(a) Calculate the design load from the frame below.
(b) Calculate and draw the point load for each floor level
by using simple method.
(c) Calculate the centre of gravity for this frame.
COLUMN DESIGN
Q7:
What are the requirement for longitudinal steel, links
and spacing in column design?
COLUMN DESIGN
Q8:
Draw the critical loading arrangement for column CS.
200 x 200 3m
A B C D E
200 x 200 3m
2m 2m
44 m
m
S 54 m
m
COLUMN DESIGN
Q9:
Figure shows the braced column at the edge of flat slab.
The axial load is 2000kN, first order moment at top is 39
kNm and -39 kNm at bottom is shown beside the
column. Given: fck = 30 N/mm2, fyk = 500 N/mm2 , 300 mm
- 39 kNm
THE END