Professional Documents
Culture Documents
How To Use A Mason Square
How To Use A Mason Square
During surface finishing, the Mason’s Square can be used to check if the
mortar patches on two perpendicular walls are at 90 degrees from each other.
First, hold the straightedge against the patches on the first wall. Now, position
the Mason’s Square such that the short arm is against the straightedge, while
the long arm is against the patches on the second wall.
When using the Mason’s Square to check if the outside edge of a wall is at a
right angle with the front surface, place the Straightedge against the plane of
the front surface such that it extends beyond the outer edge of the wall. Now,
position the Square such that the short arm is against the Straightedge and the
long arm is against the outer edge of the wall. Just as before, ensure that there
is no gap between the arms and the respective surfaces.
https://www.sikana.tv/en/diy/masonry/how-to-use-a-mason-square