The document outlines a 7 step process for turning an MS bright bar on a lathe machine. The process includes facing, turning, reversing, step turning, center drilling, drilling, and tapping operations to produce a part with an outer diameter of 16.6mm, inner diameter of 8mm, and total length of 20mm including a 5mm long collar section of 19mm diameter. Speed and feed rates are listed for each tool.
The document outlines a 7 step process for turning an MS bright bar on a lathe machine. The process includes facing, turning, reversing, step turning, center drilling, drilling, and tapping operations to produce a part with an outer diameter of 16.6mm, inner diameter of 8mm, and total length of 20mm including a 5mm long collar section of 19mm diameter. Speed and feed rates are listed for each tool.
The document outlines a 7 step process for turning an MS bright bar on a lathe machine. The process includes facing, turning, reversing, step turning, center drilling, drilling, and tapping operations to produce a part with an outer diameter of 16.6mm, inner diameter of 8mm, and total length of 20mm including a 5mm long collar section of 19mm diameter. Speed and feed rates are listed for each tool.
The document outlines a 7 step process for turning an MS bright bar on a lathe machine. The process includes facing, turning, reversing, step turning, center drilling, drilling, and tapping operations to produce a part with an outer diameter of 16.6mm, inner diameter of 8mm, and total length of 20mm including a 5mm long collar section of 19mm diameter. Speed and feed rates are listed for each tool.