Professional Documents
Culture Documents
Specification Sheet: Description Uom Parameter
Specification Sheet: Description Uom Parameter
SPECIFICATION SHEET
Product : Accessories Model : HBR 70X Date (Org): 20.02.2018
All data and information in this sheet are confidential and property of ELGi EQUIPMENTS LIMITED
Page 1 of 7
DOC No: NPD-Accessories-88-(HBR)-2018-02-0059 rev R00B
SPECIFICATION SHEET
Product : Accessories Model : HBR 70X Date (Org): 20.02.2018
Pressure Bar g 7
Ambient Temperature °C 35
Inlet Air Temperature (Max) °C 45
Pressure Dew Point °C -20
Quality ISO 8573-1,2010, 5.3, Table 3, Class 3
Relative Humidity % 100
Design Condition
Design Pressure Bar (g) 110 % of operating pressure
Design Temperature °C 300
Installation Of Dryer Indoor
Testing
Hydro Pressure Bar (g) 150 % of design pressure
Dryer operation and performances Bases on sequences drawing
Radiography Nil
Electrical details
Power Supply 415 VAC, 3 Ph, 50 Hz with Neutral
Control power supply 230 VAC, 1 Ph, 50 Hz
Average Power consumption KW/hr 20.3
Area classification safe
All cable make Poly cable/lab
Insulation
Places of insulation Where over surfaces temperature above 60 deg C
Material Mineral wool
Thickness of the insulator 50 to 70
Standard for insulation BS 5970 : 2001
Panting specification
Surfaces preparation SAND blasting
Un insulated and insulated surfaces
a) Final colure As per Elgi Standard
Insulated surfaces Heat resistances aluminum BACK
Instruments and controllers
1. Local and remote operation through hard wire communication
2. Dryer ON/OFF indication
3. Each cycle change over valve ON/OFF indication
4. Present process are displayed in LCD display
5. Pressure and temperature gauge of each adsorption tower
6. Regeneration heater provided
7. Regeneration Blower provided
All data and information in this sheet are confidential and property of ELGi EQUIPMENTS LIMITED
Page 2 of 7
DOC No: NPD-Accessories-88-(HBR)-2018-02-0059 rev R00B
SPECIFICATION SHEET
Product : Accessories Model : HBR 70X Date (Org): 20.02.2018
8. One RTD (PT 100) provided for heater surfaces temperature maintains purposes
9. One RTD (PT 100) provided for heater outlet air temperature maintains purposes
10. Auto Drain Valve at pre filter
11. Auto Drain Valve ON / OFF indication
12. Manual drain valve at after filter
Major components description
Dryer controller
Features:
Fully automatic, Micro processor based Electronic Controller with “LCD DISPLAY”
MAKE OF PLC :- AB 1400 model
CONTROL PANEL MAKE :- RITTAL
General items
Pipe materials SA 106 Gr.B, Sch 40
Flanges ANSI B 16.5 Cl. 150 lbs, SORF, SA 105
fastener grade SA 193 / 194 (8.8)
Make fastener Reputed
GASKET MAKE SEALING AND JOINT
GASKET GRADE Non asbestos
O-ring material Silicon
Desiccant tower
MOC SA 516 Gr.70
Corrosion allowances mm 1.5
Make Summits
Quantity Nos. 2
Pre & After filter
Element type Coalescing
Element MOC Borosilicate glass fiber
Rating µ 1
Body SA 106 Gr.B
Make Summits
12 month or 0.5 pressure drop which over
Element change
earlier
DPG requirement Summits Standard one
Efficiency 99.9%
Quality of Air ISO 8573-1, Class 1
Quantity No. 1 Each
Heater
Type Electric
All data and information in this sheet are confidential and property of ELGi EQUIPMENTS LIMITED
Page 3 of 7
DOC No: NPD-Accessories-88-(HBR)-2018-02-0059 rev R00B
SPECIFICATION SHEET
Product : Accessories Model : HBR 70X Date (Org): 20.02.2018
Installed Rating Kw 25
U’ shape mineral filled metal sheathed heating
Element
elements brazed to flange
Resistance alloy Nichrome 80/20 grade
Sheath MOC SS 304
MOC of housing SA 106 Gr. B / SA 516 Gr.70
Life 5 years ( Conditions Apply )
Make Telelec / Escort
Quantity No. 1
Blower
Make MP Engineering / Associated furnace
Type Centrifugal, forced drought
Moc IS 2062
Flow rate m3/hr 850
Power consumption HP 5
Pressure Inch 32 WC
Life 5 years ( Conditions Apply )
Input Air As per Ambient condition
Make M.P.Engineering / Associated Furnace
Quantity No. 1
Control Panel
Make Rittal
Enclosure IP 55
Moc CRCA Sheet
Main & Exhaust Valves with Limit Switch
Type 3 & 2 way ball Valve
Operation Actuator driven
Body Cast steel
Ball/Plug Stainless steel
Seat PTFE
Rating lbs 150
Make VI/ Flowchem
Quantity Nos. 1+2 per dryer
Exhaust Muffler
Make Summits
All data and information in this sheet are confidential and property of ELGi EQUIPMENTS LIMITED
Page 4 of 7
DOC No: NPD-Accessories-88-(HBR)-2018-02-0059 rev R00B
SPECIFICATION SHEET
Product : Accessories Model : HBR 70X Date (Org): 20.02.2018
All data and information in this sheet are confidential and property of ELGi EQUIPMENTS LIMITED
Page 5 of 7
DOC No: NPD-Accessories-88-(HBR)-2018-02-0059 rev R00B
SPECIFICATION SHEET
Product : Accessories Model : HBR 70X Date (Org): 20.02.2018
All data and information in this sheet are confidential and property of ELGi EQUIPMENTS LIMITED
Page 6 of 7
DOC No: NPD-Accessories-88-(HBR)-2018-02-0059 rev R00B
SPECIFICATION SHEET
Product : Accessories Model : HBR 70X Date (Org): 20.02.2018
Note:
Unless otherwise specified make and specification of bought out items are as per manufacturer standard.
All data and information in this sheet are confidential and property of ELGi EQUIPMENTS LIMITED
Page 7 of 7