The document outlines various topics to be covered from 4th May to 25th May regarding furnace introduction and operation. It includes discussion of fired heater configuration and parts, burner types, radiation and convection concepts, fans and blowers, dampers, soot blowers, refractory types, tube placement variations, NOx and combustion chemistry, and air preheat systems. The topics cover key components, concepts, and design considerations for industrial furnaces used in oil and gas fields.
The document outlines various topics to be covered from 4th May to 25th May regarding furnace introduction and operation. It includes discussion of fired heater configuration and parts, burner types, radiation and convection concepts, fans and blowers, dampers, soot blowers, refractory types, tube placement variations, NOx and combustion chemistry, and air preheat systems. The topics cover key components, concepts, and design considerations for industrial furnaces used in oil and gas fields.
The document outlines various topics to be covered from 4th May to 25th May regarding furnace introduction and operation. It includes discussion of fired heater configuration and parts, burner types, radiation and convection concepts, fans and blowers, dampers, soot blowers, refractory types, tube placement variations, NOx and combustion chemistry, and air preheat systems. The topics cover key components, concepts, and design considerations for industrial furnaces used in oil and gas fields.
The document outlines various topics to be covered from 4th May to 25th May regarding furnace introduction and operation. It includes discussion of fired heater configuration and parts, burner types, radiation and convection concepts, fans and blowers, dampers, soot blowers, refractory types, tube placement variations, NOx and combustion chemistry, and air preheat systems. The topics cover key components, concepts, and design considerations for industrial furnaces used in oil and gas fields.
1 Furnace Introdution: 4th May SK (a.)Application of fired heater-oil and gas fields, (b.)Reaction furnance(eg reformer) and non reaction furnace,(c.) Parts of fired heater- Definition of radiation and convection section, (d.)Configuration of fired heater- Box, vertical cabin+tube orientation(vert,hor,arbor,helical, inverted u), (e.)Vertical cylinderical, Cabin,Box- application, (f.)Modes of operation- nat,forced,induced,balanced
3 (a.)All burner,(b.) burner-floor, 6th May AG
endwall,sidewall,sidewall multilevel,(c.)low nox, ultra low nox, raw gas burners,(d.)Burners- oil,gas,comb,nat,forced
4 (a.)Radiation concepts- duel 8th May SK
nature, stephan boltzman law, view factor,view Factor relations, (b.)Conv. Basic concepts-HT coefficent,Nuselt number, LMTD,approach,Nat and forced conv.
5 Fans and blowers, type, 12th May AG
operation, 6 (a.)Damper, SOB and its types, 14th May SK operation,(b.)Soot blowers and types
7 Refractory types 18th May SK
8 Varaition of placement of 20th May AG tube:refractary backed,centrallyplaced,single&do uble side fired, tube pitch 2D, 3D
9 Nox,excess air,acid dew point, 22th May SK
chemistry and combustion 10 (a.)APH, (b.)Types of APH 25th May SK systems,Glass and cast,SAPH 11 Tube data: Terms and definintion, rupture and elastic stress and design, Maximum local heat flux, Allowable Skin temprature,