This document contains a CNC program for milling using a 5mm diameter endmill. The program includes setup codes to select tool offsets and set the work coordinate system, followed by a series of G-code blocks that move the tool along a pattern in the X-Y plane at different Z depths with a feed rate of 50mm/min. The program is finished with codes to stop spindle rotation and end the program.
This document contains a CNC program for milling using a 5mm diameter endmill. The program includes setup codes to select tool offsets and set the work coordinate system, followed by a series of G-code blocks that move the tool along a pattern in the X-Y plane at different Z depths with a feed rate of 50mm/min. The program is finished with codes to stop spindle rotation and end the program.
This document contains a CNC program for milling using a 5mm diameter endmill. The program includes setup codes to select tool offsets and set the work coordinate system, followed by a series of G-code blocks that move the tool along a pattern in the X-Y plane at different Z depths with a feed rate of 50mm/min. The program is finished with codes to stop spindle rotation and end the program.