Professional Documents
Culture Documents
Orddiffsoln 1998
Orddiffsoln 1998
1998
6 (a) If f ( x) = 5 x − 8 and g ( x) = 13 − 2 x, find the value of x for which
f (x) = g(x).
(b) The speed, v, in metres per second of an engine moving along a track is related to
time, t, in seconds by
v = 13 (2t + 5).
(i) Draw the straight line graph of this relation, putting t on the horizontal axis,
for 0 ≤ t ≤ 8.
(ii) Use your graph to estimate the speed when t = 2.5 seconds.
(iii) Use your graph to estimate the time at which the speed reaches 6 metres per
second.
6 (b) (i) As these graphs are straight lines, you only need to plot the first and
last points in the domain.
v (m/s)
9
8
7
6
5
4
3
2
1
1 2 3 4 5 6 7 8 9 t (s)
6 (b) (ii)
v (m/s)
Start at 2.5 s along the horizontal axis and
9
go straight up till you meet the graph.
8
Now go straight across to the vertical axis
7
and read off the speed v. 6
∴ v = 3.3 m/s 5
4
3.3
3
2
1
1 2 3 4 5 6 7 8 9 t (s)
2.5
6 (b) (iii) v (m/s)
Start at 6 m/s along the vertical axis and 9
go straight across till you meet the graph. 8
Now go straight down to the horizontal 7
axis and read off the time t. 6
∴ t = 6.5 s 5
4
3
2
1
6 (c) (i) 1 2 3 4 5 6 7 8 9 t (s)
6.5
f ( x) = ( x + k )( x − 2) 2
f (3) = 7 ⇒ (3 + k )(3 − 2) 2 = 7
⇒ (3 + k )(1) 2 = 7
⇒ 3+ k = 7
∴k = 4
6 (c) (ii)
f ( x) = ( x + 4)( x − 2) 2 [Multiply this out and tidy up.]
⇒ f ( x) = ( x + 4)( x 2 − 4 x + 4)
⇒ f ( x) = x3 − 4 x 2 + 4 x + 4 x 2 − 16 x + 16
∴ f ( x) = x3 − 12 x + 16
STEPS FOR FINDING THE LOCAL MAXIMUM AND LOCAL MINIMUM OF A FUNCTION:
STEPS
dy d2y
1. Differentiate the function to find . Differentiate again to find .
dx dx 2
dy
2. Set = 0 and solve for x to find the turning points.
dx
d2y
3. Substitute the turning points into to decide if they are a local
dx 2
maximum or a local minimum.
4. Find the y coordinates of the turning points by substituting the x values
back into the equation of the original function.
1. y = f ( x) = x3 − 12 x + 16
dy
= f ′( x) = 3 x 2 − 12
dx
d2y
= f ′′( x) = 6 x
dx 2
dy
2. = 0 ⇒ 3 x 2 − 12 = 0
dx
⇒ 3( x 2 − 4) = 0 a 2 − b 2 = (a + b)(a − b) ....... 1
⇒ 3( x + 2)( x − 2) = 0
∴ x = −2, 2
⎛ d2y ⎞
⎛ d2y ⎞ Local Maximum: ⎜ 2 ⎟ < 0
3. ⎜ 2 ⎟ = 6(−2) = −12 < 0 ⎝ dx ⎠ TP
⎝ dx ⎠ x = −2 ....... 7
⎛d y⎞
2 ⎛ d2y ⎞
Local Minimum: ⎜ 2 ⎟ > 0
⎜ 2 ⎟ = 6(2) = 12 > 0 ⎝ dx ⎠ TP
⎝ dx ⎠ x = 2
4. x = −2 : y = f (−2) = (−2)3 − 12(−2) + 16 = −8 + 24 + 16 = 32 ⇒ (−2, 32) is a local maximum.
x = 2 : y = f (2) = (2)3 − 12(2) + 16 = 8 − 24 + 16 = 0 ⇒ (2, 0) is a local minimum.
7 (a) Differentiate with respect to x
(i) x 2 − 3x
1
(ii) .
x2
dy 2x
(b) (i) Find when y = 2 .
dx x +1
dy
when y = (4 − 3 x ) and write down the range of values of x for
2 7
(ii) Find
dx
dy
which > 0.
dx
(c) The volume of water, V, in cm3, that remains in a leaking tank after t seconds is given
by
V = 45000 − 300t + 0.5t 2.
(i) After how many seconds will the tank be empty?
(ii) Find the rate of change of the volume with respect to t when t = 50 seconds.
SOLUTION
REMEMBER IT AS:
7 (a) (i)
dy Multiply down by the power and
y = xn ⇒ = nx n −1 ....... 1
dx subtract one from the power.
dy
CONSTANT RULE: If y = Constant ⇒ =0
dx
dy du
MULTIPLY BY A CONSTANT RULE: If y = cu, where c is a constant and u is a function of x, = c× .
dx dx
y = x 2 − 3x
dy
⇒ = 2x − 3
dx
7 (a) (ii)
1
y= = x −2 POWER RULES
x2 1 1
4. a − n = n Ex. x −3 =
dy 2 x3
⇒ = −2 x −3 = − 3 a
dx x
7 (b) (i)
du u
THE QUOTIENT RULE: If y = then:
u = 2x ⇒ =2 v
dx du dv
dv v −u
dy
v = ( x 2 + 1) ⇒ = 2x = dx dx ....... 3
dx dx v2
2x
y=
x +1
2
du dv
v −u
dx = ( x + 1)2 − 2 x(2 x)
2
dy dx
⇒ =
dx v2 ( x 2 + 1) 2
dy 2 x 2 + 2 − 4 x 2 2 − 2 x 2
⇒ = = 2
dx ( x 2 + 1) 2 ( x + 1) 2
7 (c) (ii)
, at a time t = 50 s, ⎛⎜ dV ⎞⎟ .
dV
You need to find the rate of change of the volume,
dt ⎝ dt ⎠t =50
dV
V = 45000 − 300t + 0.5t 2 ⇒ = −300 + 0.5 × 2t = −300 + t
dt
⎛ dV ⎞
∴⎜ ⎟ = −300 + 50 = −250 cm /s
3
⎝ dt ⎠t =50
1
8 Let f ( x) = , for x ∈ R and x ≠ 1.
x −1
(i) Find the value of f (−2), f (0), f ( 32 ) and f (5).
(ii) Find f ′( x), the derivative of f (x).
(iii) Draw the graph of f (x) for −2 ≤ x ≤ 5.
(iv) Find the equation of the tangent T to the curve at the point (0, − 1).
(v) Find the coordinates of the other point on the graph of f (x) at which the tangent
to the curve is parallel to T.
SOLUTION
8 (i)
1
f ( x) =
x −1
1 1 1
f (−2) = = = − = −0.33
(−2) − 1 −3 3
1 1
f ( 0) = = = −1
(0) − 1 −1
1 1
f ( 32 ) = 3 = 1 =2
( 2 ) −1 2
1 1
f (5) = = = 0.25
(5) − 1 4
8 (ii)
1
f ( x) = = ( x − 1) −1
( x − 1)
1
⇒ f ′( x) = −1( x − 1) −2 = −
( x − 1) 2
8 (iii) DRAWING RECIPROCAL GRAPHS
STEPS
1. Find the gap first by putting the bottom of the function equal to
zero and solving for x.
2. Find other values of f (x) by putting in values of x as given in the
domain.
3. Plot these points by joining up smoothly and continuing towards
the vertical line but never touching it.
1. Put ( x − 1) = 0 ⇒ x = 1
2. Use the values that you worked out in part (i).
Points: (−2, − 13 ), (0, − 1), ( 32 , 2), (5, 14 )
3. Plot the graph. Draw the gap (x = 1) first.
f (x)
3
-3 -2 -1 1 2 3 4 5 x
-1
-2
x=1
8 (iv) C
STEPS TO FINDING THE EQUATION OF A TANGENT, T, T
AT A POINT (x1, y1), ON THE CURVE, C
(x1, y1)
STEPS
dy
1. Differentiate the equation of the curve: .
dx
⎛ dy ⎞
2. Substitute x1 in for x to find the slope of the tangent: ⎜ ⎟
⎝ dx ⎠ x = x1
3. Find the point of contact (x1, y1) by substituting x1 into the equation of
the curve to find y1.
4. Find the equation of the line of the tangent using formula 4.
dy 1
1. = f ′( x) = −
dx ( x − 1) 2
⎛ dy ⎞ 1 1
2. ⎜ ⎟ = − =− = −1
⎝ dx ⎠ x =0 (0 − 1) 2
(−1) 2
STEPS
dy
1. Differentiate the equation of the curve: .
dx
dy
2. Put equal to the slope, m, and solve the resulting equation for x to get
dx
the x coordinates of the points.
3. Substitute these values of x back into the equation of the curve to get the
y coordinates of the points.