Professional Documents
Culture Documents
Air Diffusion Swirl5 1.0 WEB
Air Diffusion Swirl5 1.0 WEB
Swirl5
www.air-diffusion.co.uk
sales@air-diffusion.co.uk
Content
Introduction ...............................................................................................2
Technical Description ................................................................................. 3
Performance Data ..................................................................................... 3
Quick Selection Data ................................................................................. 4
Selection Data ....................................................................................... 5-8
Dimensions and Weights ............................................................................ 9
Additional Border Dimensions .................................................................... 9
Plenum Boxes ........................................................................................... 10
Standard Fixing and Installation ................................................................ 13
Ordering Key ............................................................................................ 14
With You From Start To Finish ................................................................... 15
Introduction
Created using drawing template RAM-F-027 Issue DA 11/16
6 5 4 3 2 1
Drawing No: Sheet Rev
. Third Angle
A3 All dimensions in mm. Do NOT scale from drawing. If in doubt ASK!
1 of 2 0 Projection
cooling applications.
The information disclosed herein was originated by and is the property of Swegon Air Management Limited (SAML). SAML reserves all patent, proprietary,design, use, sale, manufacturing and reproduction rights thereto. This does not apply to any vendor parts.
Rev: Comments:
Drawn By: Stefan Mljkovic Da
Checked By: Da
Approved By: Da
Product:
Client:
.
Project: Swirl Diffuser
A Description:
Swirl Diffuser - Square Type-***
Construction from 1.2mm galvanised Square diffusers are suitable for lay-in, Circular diffusers are suitable for solid
steel clip-in, tegular type ceilings and solid or exposed ceilings (with optional
Polyester powder coat to RAL9010 - ceilings. circular plenum box).
30% gloss to all external surfaces. Square type naming convention: Circular type naming convention:
Alternatively, we have five standard
RAL colours to select from
Performance Data
Swegon R&D Academy Test Notes
▸ Throw data is based on a temperature differential of 10°C cooling to a terminal velocity of 0.50 and 0.25 m/s
respectively to give average room velocities no greater than 0.25m/s with a room height of 2.7m when mounted flush
with an unobstructed ceiling
▸ Pressure measurement is static plenum pressure based on a side entry plenum box
▸ NR values include -8dB room absorption and are calculated as per BS 8233:2014 Anex B (NR ≈ dBA -6)
▸ Aerodynamic testing carried out in general accordance to BS EN 12238:2001 (Ventilation for buildings - Air
terminal devices - Aerodynamic testing and rating for mixed flow applications)
▸ Acoustic testing carried out in general accordance to BS EN ISO 5135:1999 acoustics. Determination of sound power
levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation
room
www.air-diffusion.co.uk 3
Selection Example
▸ Selection @ 100 l/s
▸ Pressure 14pa
▸ Throw 1.3m
▸ Sound Level NR 29
Throw(m)
25.00
Throw (m)
NR 35
20.00 1.00
15.00 NR 30
10.00 NR 25 0.50
NR 20
5.00 NR 15
NR 10
NR 5
0.00 0.00
0.00 20.00 40.00 60.00 80.00 100.00 120.00 140.00 160.00
Volume(l/s)
Volume (l/s)
25 90 5 5 0.4 0.9
40.00
NR values include - 8dB
35.00 room absorption Throw @Vt 0.5 m/s
30.00 NR 30 1.00
(Pa)
Pressure
Pressure(Pa)
Throw(m)
Throw (m)
25.00
Pressure
NR 25
20.00
15.00 NR 20 0.50
10.00 NR 15
NR 10
5.00 NR 5
0.00 0.00
0.00 10.00 20.00 30.00 40.00 50.00 60.00 70.00
Volume(l/s)
Volume (l/s)
45.00
30.00 NR 40 1.50
Pressure(Pa)
Throw(m)
(m)
25.00
Throw
NR 35
20.00 1.00
15.00 NR 30
10.00 NR 25 0.50
NR 20
5.00 NR 15
NR 5 NR 10
0.00 0.00
0.00 20.00 40.00 60.00 80.00 100.00 120.00 140.00 160.00
Volume(l/s)
Volume (l/s)
www.air-diffusion.co.uk 5
Selection Data
Graphs based on a terminal velocity of 0.5m/s
Pressure NR 45
25.00 NR values include -8dB
2.50
room absorption
Throw(m)
(m)
15.00 1.50
NR 35
Throw
10.00 NR 30 1.00
NR 25
5.00 NR 20 0.50
NR 15
NR 5NR 10
0.00 0.00
0.00 50.00 100.00 150.00 200.00 250.00
Volume(l/s)
Volume (l/s)
20.00 2.00
Throw(m)
15.00 1.50
Throw
NR 35
10.00 NR 30 1.00
NR 25
5.00 NR 20 0.50
NR 15
NR 10
NR 5
0.00 0.00
0.00 50.00 100.00 150.00 200.00 250.00 300.00
Volume(l/s)
Volume (l/s)
25.00
Pressure(Pa)
Throw(m)
(m)
NR 25
20.00 1.00
Throw
15.00 NR 20
10.00 NR 15 0.50
NR 10
5.00 NR 5
0.00 0.00
0.00 10.00 20.00 30.00 40.00 50.00 60.00 70.00
Volume(l/s)
Volume (l/s)
Throw(m)
(m)
25.00
NR 35
Throw
20.00 1.00
15.00 NR 30
10.00 NR 25 0.50
NR 20
5.00 NR 15
NR 5 NR 10
0.00 0.00
0.00 20.00 40.00 60.00 80.00 100.00 120.00 140.00 160.00
Volume(l/s)
Volume (l/s)
www.air-diffusion.co.uk 7
Selection Data
Graphs based on a terminal velocity of 0.25 m/s
NR 45
25.00 NR values include -8dB Throw @ Vt 0.25 m/s 2.50
room absorption Pressure
20.00 2.00
NR 40
Pressure (Pa)
Throw (m)
15.00 1.50
NR 35
10.00 NR 30 1.00
NR 25
5.00 NR 20 0.50
NR 15
NR 5NR 10
0.00 0.00
0.00 50.00 100.00 150.00 200.00 250.00
Volume (l/s)
SW5600
SW5 600 Selection
Selection Table
Table
35.00 3.50
Pressure NR 45
30.00 3.00
NR values include -8dB
room absorption
25.00 2.50
Throw @ Vt 0.25 m/s
NR 40
Pressure (Pa)
Pressure(Pa)
20.00 2.00
Throw(m)
Throw (m)
15.00 NR 35 1.50
10.00 NR 30 1.00
NR 25
5.00 NR 20 0.50
NR 15
NR 10
NR 5
0.00 0.00
0.00 50.00 100.00 150.00 200.00 250.00 300.00
Volume (l/s)
Volume(l/s)
C C
D1 D D2 D D2 D1
B B
(kg) (kg)
300 595 254 84 0.0145 2.7 300 300 254 84 0.0145 0.6
400 595 350 92 0.0301 2.8 400 400 350 92 0.0301 1.1
500 595 450 150 0.0386 2.8 500 500 450 150 0.0386 1.7
600 595 540 170 0.058 2.9 600 600 540 170 0.058 2.4
www.air-diffusion.co.uk 9
Plenum Boxes
Specification Selection Guide
Plenum box is constructed of a
minimum of 0.7mm thick galvanised Spigot Velocity m/s 1.5 2.0 2.5 3.0 3.5 4.0
sheet steel. Generally fabricated in 3
sections which are mechanically jointed. Pressure Drop Pa* 2 4 6 8 12 16
Plenums are supplied as standard Sound Level NR* - - 25 30 35 40
unlined side entry with fi xing / hanging
brackets and crossbar as standard.
Spigot Volumes
Accessories
▸ Spigot balancing / commissioning Diameter (mm) 1.5 2.0 2.5 3.0 3.5 4.0
dampers include manual quadrant or 100 10 15 19 22 26 30
cord operated
125 18 24 30 35 41 47
▸ 6mm thick class ‘O’ internal lining 150 25 34 42 51 60 68
(12/25mm thick available on request)
160 35 46 58 70 82 94
▸ Equalising grid (50% free area 200 45 60 75 91 109 121
perforated mesh)
225 58 77 96 117 137 151
▸ Fixing / hanging brackets can be 250 71 95 120 142 170 191
removed or special types on request
275 86 115 145 172 205 230
300 103 139 172 208 240 275
Finish 315 120 160 200 240 280 320
▸ Standard fi nish galvanised steel 350 140 188 235 280 328 375
▸ Can be polyester powder coated to a 400 185 245 310 370 430 495
chosen RAL colour. Please contact
the sales office for more
Created details
using drawing Swegon
template RAM-F-027 Issue D 3/15 R&D Academy Test Notes
2 1
doubt ASK! The pressure drop given is for supply
diffuser with the damper fully open.
© Ruskin Air Management Limited
etail When the diffuser is installed with
Stourbridge Road, Bridgnorth, Shropshire
WV15 5BB
al) Tel: +44 (0)1746 761921 plenum
D box, the additional pressure
Created using drawing template RAM-F-027 Issue D 3/15
Fax: +44 (0)1746 766450
5
Third Angle
4 3
www.ruskinuk.co.uk
All dimensions in mm. Do NOT scale from drawing. If in doubt ASK!
loss of the 2box has to be added to
1 the
A3
Projection
Notes: diffuser.
27.8
1\ Hemmed edge on long edge only, See © Ruskin Air Management Limited
Circular Adaptor Detail Central Fixing
AD-PB-7001 for Bar Detail
details. Stourbridge Road, Bridgnorth, Shropshire
2\ Lining cut back from edge of plenum box WV15 5BB
M6 Open End Flange Head (DIM R) See AD-PB-7001
L (Internal) for details. Tel: +44 (0)1746 761921 D
Knurled Body Nutsert 3\ Central Fixing Bar fitted between shortest Fax: +44 (0)1746 766450
TSZN30708 span, See AD-PB-7001 for details. www.ruskinuk.co.uk
Plenum Accessories
4\ Circular Spigot shown for Square or Flat Fixing
Notes: Collar
27.8
Oval spigots see AD-PB-7001. 1\ Hemmed edge on long edge only, See
25
Y (External)
H (External) Note 6
Front Face
D (Nominal)
W (Internal)
Created using drawing template RAM-F-027 Issue D 3/15
5 4 3 2 1
Third Angle
ProjectionPBS-2 (Plenum
A3 All dimensions Box Square - Top Entry)
in mm. Do NOT scale from drawing. If in doubt ASK!
6 5 4 3 2
Created using
65
R - Lining Cutback distance (from bottom edge) Part No: PA-1
D - Nominal Spigot Diameter Est Weight: Size Dependant
A - Square Spigot Width (Nominal) Drawing notes & limits (unless otherwise stated) Part N
B - Square Spigot Height (Nominal) No Decimal: 1.00mm Est W
Y (External)
H (External)
Z - Equalising Grid Height (from bottom edge)
Wo - Outlet Width of Plenum (Internal) Notes: Critical dims
Ko - Outlet Height of Plenum (External) 1\ Hemmed edge on long edge only, See
Q - Outlet Width Offset (External) AD-PB-7001 for details. Notes:
P - Outlet Length Offset (External) 2\ Lining cut back from edge of plenum box 1\ Hemme
Di - Circular Adaptor Spigot Diameter (Nominal) AD-PB-70
(DIM R) See AD-PB-7001 for details.
2\ Lining c
3\ Central Fixing Bar fitted between shortest
(DIM R) S
span, See AD-PB-7001 for details.
4\ Circular Spigot shown for Square or Flat
C
Front Face 3\ Centra
D (Nominal) C
Oval spigots see AD-PB-7001.
span, See
4\ Circula
5\ Circular adaptor to fit circular diffusers, see Oval spig
AD-PB-7001 for details. 5\ Circula
6\ Clinches - 150mm maximum spacing. AD-PB-70
Created using drawing template RA
6\ Clinche
6 W (Internal)
5 Plenum Pan Adaptor Options: 4 L (Internal) +18 3 2
Drawing No: Sheet Rev Third Angle Lined (Black)in mm. Do NOT scale
All dimensions
1: Internal Black
A3 from drawing. If in doubt ASK! Plenum P
PA (Pan Adapter)
AD-PB-2001 1 of 1 0 Projection - 6mm Standard / 12mm / Special 1: Interna
2: Hemmed Edge - Note 1 - 6mm
Dimension Key: 3: Central Fixing Bar - Note 3 © Ruskin Air 2:Manage
Hemme
L - Length of Plenum (Internal) 4: Spigots Form 3: Centra
Stourbridge Road, Bridg
W - Width of Plenum (Internal) 80 - Circular / Square / Flat Oval - Note 4 4:
WV15Spigots
5B
- Circu
Y (Internal) D H - Height of Plenum (External)
C - Height of Cut-out (from bottom edge)
5: Spigot Position
- Central / Offset W (Internal) Tel: +44 (0)1746
5: Spigot
Fax: +44 (0)1746
R - Lining Cutback distance (from bottom edge) - Cent
6: Spigot Damper www.ruskinuk
D - Nominal Spigot Diameter 6: Spigot
- Cord Control / Teleflex Control / Quadrant Assembly
- Cord N
A - Square Spigot Width (Nominal) (CB) Part No: PA-1
(CB)
B - Square Spigot Height (Nominal) 7: Circular Adaptor - Note 5 B Est Weight: Size Depen
B 7: Circula
X (Internal)
5 4 3 2 1 - Circular / Square4\/Circu
Flat
The information disclosed herein was originated by and is the property of Ruskin Air Management Limited (RAML). RAML reserves all patent, proprietary,design, use, sale, manufacturing and reproduction
5: Spigot Position Oval spn
rights thereto. This does
y and is the property of Ruskin Air Management Limited (RAML). RAML reserves all patent, proprietary,design, use, sale, manufacturing and reproduction rights thereto. This does not apply to any vendor parts. - Central / Offset 5\ Circu
A AD-PB-2001 Project: N
Descriptio
6 5 4 3 2
PA-1 Pa
The information disclosed herein was originated by and is the property of Ruskin Air Management Limited (RAML). RAML reserves all patent, proprietary,design, use, sale, manufacturing and reproduction rights thereto. This does not apply toAssemb
any ve
Drawing N
AD-
6 5 4 3 2
The information disclosed herein was originated by and is the property of Ruskin Air Management Limited (RAML). RAML reserves all patent, proprietary,design, use, sale, manufacturing and reproduction rights thereto. This does
www.air-diffusion.co.uk 11
L(Internal)+18
D(Nominal)
G
Y (External)
Ft
Shee Rev ThirdAngle A1
gueImage 1 of1 0 Projection All dimensions inmm. DoNOTscalefromdrawing. IfindoubtASK!
L (Internal) + 18 ©SwegonAirM
D (Nominal)
L (Internal) +18 W(Internal) 65 StourbridgeRoad,
X (Internal) + 9 Sidepanel&liningrem
ovedforclarity WV
H (External)
W(Internal) 65
Tel: +44(0
H (External)
Fax:+44(0
Y (External)
www.swe
D (Nominal)
E
H (External)
L(Internal)+18
H (External)
H (External)
D (Nominal)
D(Nominal)
D (Nominal)
65
65
D
l)
65
65
65
Di (Nominal) Di (Nominal)
Y (External)
W (Internal)
65
D (Nominal)
W (Internal)
H (External)
65
H (External)
H (External)
L (Internal) +18
D (Nominal)
L (Internal) +18
D (Nominal)
65
65
A
Draw ingNo: SheD
etraC
w ingNo:Rev
Cata3logueImage 1 of1 at2alogu0 eIm
10 12 911 108 9 7 8 6 7 5 6 4 5 3 4 2 1
Di (Nominal) TheDi (Nominal)
informationdisclosedhereinwasoriginatedbyandisthepropertyofSwegonAirManagem entLim Di
it (Nominal)
ed(SA ML).SAMLreservesallpatent,proprietary,design,use,sale,manufacturingandreproductionrights thereto.This does notapplytoanyvendorparts.
Theinform
ationDiff
disclosedher
e inwa
s
user Size o
rig
inat
edbyan
d isth
e p
rop
ert
y
L (mm) of Sw e gon Air Ma nageme nt Lim
it
ed
W (mm) (SA ML).SAM L reserve sallpa
tent
,prop
r
Hiet
ary,
d esig
n ,use,sale,m anuf
acturingan
D d re produ ction rights t
he r
e t
o. This doe
Dis n o
t apply t
o an y ven dorp arts.
D (Nominal)
Rev:ECN/Com m ents:
Theinform
ationdisclosedhereinwasoriginatedbyandisthepropertyofSwegonAirManagem
entLim
ited(SAML).SAMLreservesallpatent,proprietary,design,use,sale,m
anufacturingandreproductionrights thereto.This does notapplytoanyvendorparts.
ØD
www.air-diffusion.co.uk 13
Ordering Key
Diffuser
Example
Model Type Plate Type Size Fixings Plate Colour Accessories
SW5 L 600 F1 3 N
300 N-None
400 LB -Light Baffle
500 EX - Extract Collar
F1 (standard)- Central
600 Fixing hole
*600 only
Plenum Boxes
Example
Box Type Lining Spigot Damper Options Colour
PBS-1 L C 3 0
PBS-1- U - Standard Unlined N - Plain spigot 0 - No options 0- Mill Finish
Plenum box to suit square Plenum Box (no damper) 2 - Equalising Grid (50% 2- Silver PPC/RAL 9006
/rectangular diffuser with L - 6mm Class ‘O’ Internal Q - Quadrant damper free area mesh)
3 - White PPC/RAL 9010
circular or square side Lining fitted to spigot. 3 - Fixing lugs fitted to
entry spigot. 4 - Black PPC/RAL 9005
C - Cord operated damper side of plenum
PBS-2 - fitted to spigot 6•- PPC/Special Finish
Plenum box to suit square/ 7 - White PPC/RAL 9003
rectangular diffuser with 16 - White PPC/RAL 9016
circular or square top entry
spigot.
PA -
1 Pan Adapter to suit •
Paint Finishes
square/rectangle diffuser
Please state RAL
with square or circular top
colour -additional
entry
charges may apply
PBC-1 -
Circular plenum box to
suit circular diffuser with a
circular side entry spigot.
A construction project is complex with a large number of parties who will collaborate in various sub-
projects over a long period of time. Everyone is an expert with a focus on their individual part, so it’s no
wonder if sometimes there are design conflicts and sub-optimal solutions, with increased risk of impact on
the project timeline and budget as a result.
We at Swegon are included in all phases of the project. Therefore, we know that both challenges and needs
differ depending on who you are and in what phase of the project you are working.
Swegon has unique knowledge of the entire construction process. In order to be able to choose the right
system solution, an overall perspective and a deep knowledge of the intended function of the building is
required.
While others specialise in their individual part, Swegon’s expertise covers all.
COMMISSIONING
INSTALLATION
SPECIFICATION AND
DESIGN
SERVICING AND
MAINTENANCE
www.air-diffusion.co.uk 15
actionair | air diffusion | airfiltrera | airolution | naco