Professional Documents
Culture Documents
Safety Data Sheet According To (EC) No 1907/2006: Ceresit Whiteteq Winter Gun
Safety Data Sheet According To (EC) No 1907/2006: Ceresit Whiteteq Winter Gun
Safety Data Sheet According To (EC) No 1907/2006: Ceresit Whiteteq Winter Gun
Page 1 of 17
SDS No. : 547183
V002.0
Ceresit Whiteteq Winter Gun Revision: 24.03.2016
printing date: 03.06.2016
Replaces version from: 02.11.2015
Contains:
Diphenylmethane diisocyanate, isomers and homologues
1.2. Relevant identified uses of the substance or mixture and uses advised against
Intended use:
Foam, 1-component with propellant gas
Great Britain
ua-productsafety.uk@uk.henkel.com
Classification (CLP):
aerosol Category 1
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
Skin irritation Category 2
H315 Causes skin irritation.
Serious eye irritation Category 2
H319 Causes serious eye irritation.
Respiratory sensitizer Category 1
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Skin sensitizer Category 1
H317 May cause an allergic skin reaction.
Carcinogenicity Category 2
H351 Suspected of causing cancer.
Specific target organ toxicity - single exposure Category 3
H335 May cause respiratory irritation.
Target organ: respiratory tract irritation
Specific target organ toxicity - repeated exposure Category 2
H373 May cause damage to organs through prolonged or repeated exposure.
Hazard pictogram:
Precautionary statement: P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
Storage
For full text of the H - statements and other abbreviations see section 16 "Other information".
Substances without classification may have community workplace exposure limits available.
MSDS-No.: 547183 Ceresit Whiteteq Winter Gun Page 4 of 17
V002.0
General information:
In case of adverse health effects seek medical advice.
Inhalation:
Move to fresh air, consult doctor if complaint persists.
Delayed effects possible after inhalation.
Skin contact:
Fresh foam : Wipe off affected skin area immediately with a soft cloth and then remove residues with vegetable oil; apply skin
care product. Cured foam can be removed only mechanically.
Eye contact:
Immediately flush eyes with soft jet of water or eye rinse solution for at least 5 minutes. If pains remains (intensive smarting,
sensivity to light, visual disturbance) continue flushing and contact/seek doctor or hospital.
Ingestion:
Rinse mouth and throat. Drink 1-2 glasses of water. Seek medical advice.
4.2. Most important symptoms and effects, both acute and delayed
Danger of serious damage to health by prolonged exposure by inhalation.
4.3. Indication of any immediate medical attention and special treatment needed
See section: Description of first aid measures
Additional information:
Cool endangered containers with water spray jet.
Hygiene measures:
Wash hands before work breaks and after finishing work.
Do not eat, drink or smoke while working.
Remove any dirt that gets onto the skin with vegetable oil; skin care.
Valid for
Great Britain
Ingredient [Regulated substance] ppm mg/m3 Value type Short term exposure limit Regulatory list
category / Remarks
Methylenediphenyl diisocyanate 0,07 Short Term Exposure EH40 WEL
26447-40-5 Limit (STEL):
[ISOCYANATES, ALL (AS -NCO)]
Methylenediphenyl diisocyanate 0,02 Time Weighted Average EH40 WEL
26447-40-5 (TWA):
[ISOCYANATES, ALL (AS -NCO)]
Dimethyl ether 400 766 Time Weighted Average EH40 WEL
115-10-6 (TWA):
[DIMETHYL ETHER]
Dimethyl ether 500 958 Short Term Exposure EH40 WEL
115-10-6 Limit (STEL):
[DIMETHYL ETHER]
Dimethyl ether 1.000 1.920 Time Weighted Average Indicative ECTLV
115-10-6 (TWA):
[DIMETHYLETHER]
Butane 750 1.810 Short Term Exposure EH40 WEL
106-97-8 Limit (STEL):
[BUTANE]
Butane 600 1.450 Time Weighted Average EH40 WEL
106-97-8 (TWA):
[BUTANE]
4,4'-Methylenediphenyl diisocyanate 0,07 Short Term Exposure EH40 WEL
101-68-8 Limit (STEL):
[ISOCYANATES, ALL (AS -NCO)]
4,4'-Methylenediphenyl diisocyanate 0,02 Time Weighted Average EH40 WEL
101-68-8 (TWA):
[ISOCYANATES, ALL (AS -NCO)]
Valid for
Ireland
Ingredient [Regulated substance] ppm mg/m3 Value type Short term exposure limit Regulatory list
category / Remarks
Methylenediphenyl diisocyanate 0,02 Time Weighted Average IR_OEL
26447-40-5 (TWA):
[ISOCYANATES (ALL, AS -NCO)]
Methylenediphenyl diisocyanate 0,07 Short Term Exposure IR_OEL
26447-40-5 Limit (STEL):
[ISOCYANATES (ALL, AS -NCO)]
Dimethyl ether 1.000 1.920 Time Weighted Average Indicative OELV IR_OEL
115-10-6 (TWA):
[DIMETHYL ETHER]
Dimethyl ether 1.000 1.920 Time Weighted Average Indicative ECTLV
115-10-6 (TWA):
[DIMETHYLETHER]
Propane 1.000 Time Weighted Average IR_OEL
74-98-6 (TWA):
[PROPANE]
Butane 1.000 Time Weighted Average IR_OEL
106-97-8 (TWA):
[BUTANE]
4,4'-Methylenediphenyl diisocyanate 0,02 Time Weighted Average IR_OEL
101-68-8 (TWA):
[4,4'-METHYLENE-DIPHENYL
DIISOCYANATE (AS -NCO)]
4,4'-Methylenediphenyl diisocyanate 0,07 Short Term Exposure IR_OEL
101-68-8 Limit (STEL):
[4,4'-METHYLENE-DIPHENYL
DIISOCYANATE (AS -NCO)]
MSDS-No.: 547183 Ceresit Whiteteq Winter Gun Page 7 of 17
V002.0
Respiratory protection:
The product should only be used at workplaces with intensive ventilation/extraction. If intensive ventilation/extraction is not
possible then self-contained independent respiratory protection should be worn.
Hand protection:
Use attached gloves. Perforation time < 5 minutes.
Eye protection:
Goggles which can be tightly sealed.
Protective eye equipment should conform to EN166.
Skin protection:
Suitable protective clothing
Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.
STOT-single exposure:
May cause respiratory irritation.
STOT-repeated exposure:
May cause damage to organs through prolonged or repeated exposure.
Inhalative toxicity:
Skin irritation:
Causes skin irritation.
Eye irritation:
Causes serious eye irritation.
Sensitizing:
May cause an allergic skin reaction.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Carcinogenicity:
Suspected of causing cancer
12.1. Toxicity
No data available.
Waste code
160504 gases in pressure containers (including halons) containing dangerous substances
MSDS-No.: 547183 Ceresit Whiteteq Winter Gun Page 14 of 17
V002.0
14.1. UN number
ADR 1950
RID 1950
ADN 1950
IMDG 1950
IATA 1950
ADR AEROSOLS
RID AEROSOLS
ADN AEROSOLS
IMDG AEROSOLS
IATA Aerosols, flammable
ADR 2.1
RID 2.1
ADN 2.1
IMDG 2.1
IATA 2.1
ADR
RID
ADN
IMDG
IATA
14.7. Transport in bulk according to Annex II of Marpol and the IBC Code
not applicable
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
VOC content 20,2 %
(VOCV 814.018 VOC regulation
CH)
MSDS-No.: 547183 Ceresit Whiteteq Winter Gun Page 15 of 17
V002.0
Further information:
This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is
intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular
properties.
Risk phrases:
R12 Extremely flammable.
R20/22 Harmful by inhalation and if swallowed.
R36/37/38 Irritating to eyes, respiratory system and skin.
R40 Limited evidence of a carcinogenic effect.
R42/43 May cause sensitization by inhalation and skin contact.
R48/20 Harmful: danger of serious damage to health by prolonged exposure through inhalation.
Safety phrases:
S2 Keep out of the reach of children.
S23 Do not breathe vapour.
S24/25 Avoid contact with skin and eyes.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
S46 If swallowed, seek medical advice immediately and show this container or label.
S51 Use only in well-ventilated areas.
S56 Dispose of this material and its container to hazardous or special waste collection point.
Additional labeling:
Contains isocyanates. See information supplied by the manufacturer.
Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 °C. Do not pierce or burn, even after
use. Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition - No smoking. Keep out
of the reach of children
Contains:
Diphenylmethane diisocyanate, isomers and homologues,
Tris(2-chloro-1-methylethyl) phosphate
MSDS-No.: 547183 Ceresit Whiteteq Winter Gun Page 17 of 17
V002.0
Relevant changes in this safety data sheet are indicated by vertical lines at the left margin in the body of this document.
Corresponding text is displayed in a different color on shadowed fields.