Professional Documents
Culture Documents
Centrifugal Inline Fans Greenheck
Centrifugal Inline Fans Greenheck
Centrifugal Inline Fans Greenheck
April
2008
Models SQ & BSQ
Centrifugal Square Inline Duct Fans
Greenheck’s model SQ and BSQ centrifugal inline fans feature a unique combination of installation
flexibility, rugged construction, ease of service, high efficiency, and
low sound levels. These compact inline fans are the ideal selection for
indoor clean air applications including intake, exhaust, return, or make-
up air systems where space is a prime consideration. The need for
costly square‑to‑round transition pieces are eliminated
reducing installation costs. The square housing design,
compact size, and straight-thru airflow also give the
system designer the flexibility to mount SQ and BSQ fans
in any configuration - horizontal, vertical, or at any angle.
• Broadest performance in the industry, up to 4 in. wg
(1,000 Pa) and 28,000 cfm (47,000 m3/hr).
• Performance as cataloged is assured. All fan sizes
are tested in our AMCA Accredited Laboratory, and all
models are licensed to bear the AMCA sound and air
performance seals.
• UL Listed for electrical
• Greenheck subjects these products to extensive life testing,
assuring you the fans will provide many years of reliable performance
2
The Greenheck Standard
You can always count on personal service and expertise from our
national and international representative organization. To locate your
nearest Greenheck representative, call 715‑359‑6171 or visit our
website at www.greenheck.com
3
MOTOR
WHEEL
DRIVE FRAME
DUCT COLLARS
CABINET
CONSTRUCTION
MOTOR
DRIVE FRAME
DISCONNECT
SWITCH
DRIVE
ASSEMBLY
DUCT COLLARS
WHEEL BEARINGS
FAN SHAFT
CABINET
CONSTRUCTION
4
Standard Construction Features
Drive Frame
Constructed from heavy gauge steel. Belt
adjustment is accomplished by loosening
fasteners, sliding the motor plate, and retightening
fasteners.
Motor
Permanently lubricated, sealed ball bearing
motors are selected to provide years of trouble-
free operation with minimal maintenance.
5
Options and Accessories
INLET and DISCHARGE GUARDS All Greenheck coatings and resistance charts can
Inlet and discharge guards provide protection for be found in the performance coatings catalog.
non-ducted applications. Guards are fabricated of
welded wire on a galvanized steel frame. They are INLET VANE
easily removed for maintenance and inspection. Variable inlet vane dampers (model IVDE) are
available for models SQ and BSQ sizes 140-420
MOTOR COVER and BELT GUARD and are factory assembled to the fan. They can be
For belt driven fans, combination motor cover specified for either manual or automatic operation
and belt guards constructed of galvanized steel with controls furnished by others. These dampers
are available for protection of motors, drives, and are constructed of heavy gauge painted steel
personnel. Standard on units specified with UL. and feature uniform blade movement for positive
control. Companion inlet rings for round duct
connections are also available.
DIRECT DRIVE MOTOR COVER
Formed, galvanized steel motor covers are
available to isolate direct drive motors from the Insulated Housing
airstream. When motor covers are furnished, vents For noise reduction and condensation control,
to the exterior of the fan are provided to ensure the interior of the fan housing can be lined with a
sufficient motor cooling. fiberglass duct liner (1/2 and 1 in. being standard).
The optional motor cover can also be insulated.
CONTROL DAMPERS
Square, opposed blade volume control dampers
(model VCD) are available for duct mounting. These
dampers feature sturdy galvanized frames with
prepunched mounting holes, steel blades with vinyl
seals, and flexible metal jamb seals. A balanced
design results in minimal resistance to airflow.
6
Side Discharge
Discharge Configuration
Make sure the fan discharge is oriented in the same
direction as it was originally ordered. The performance
+9%
will change with different discharge positions. Right side +12%
discharge will give you 108% of cataloged performance
and left side will give you 109% of cataloged
performance. Use figure 3 to locate the orientation to
fit your application. Figures 4 and 5 explain the proper
Figure 3 - Percentages based on cataloged performance.
side discharge definitions. Refer to the CAPS program or
consult factory for performance modifications.
SQ Side Discharge
Duct Openings
Left Side
Discharge Inline Unit Size Width Height
Discharge
60-75 97⁄8 (251) 87⁄8 (225)
80-95 127⁄8 (327) 117⁄8 (302)
100 137⁄8 (352) 137⁄8 (352)
120 157⁄8 (403) 157⁄8 (403)
Height 130 17 ⁄8 (454)
7
177⁄8 (454)
140 19 ⁄8 (505)
7
197⁄8 (505)
160 227⁄8 (581) 227⁄8 (581)
Inlet
BSQ Side Discharge
Width
Figure 4 Right Side Duct Openings
Discharge
Unit Size Width Height
70-80-90 117⁄8 (302) 117⁄8 (302)
100 137⁄8 (352) 137⁄8 (352)
Left Side
120 15 ⁄8 (403)
7
157⁄8 (403)
Discharge Inline 130-130HP 17 ⁄8 (454)
7
177⁄8 (454)
Discharge
140-140HP 197⁄8 (505) 197⁄8 (505)
160-160HP 22 ⁄8 (581)
7
227⁄8 (581)
180-180HP 23 ⁄8 (606)
7
237⁄8 (606)
200-200HP 27 ⁄8 (708)
7
277⁄8 (708)
240-240HP 287⁄8 (733) 347⁄8 (886)
Height
300-300HP 31 ⁄8 (810) 417⁄8 (1064)
7
7
Filter Options
D A D
C C B
The filter box is designed to provide a compact and convenient clean air solution.
Factory assembled as a single unit, this fan eliminates the costly process of
designing, fabricating, and installing special remote filter box assemblies. Both
the fan and filter section feature removable access panels on both sides to
remove and replace filters, making fan maintenance simple and fast.
C C B C C B
BSQ-130 - 130HP
463⁄8 21 177⁄8 1 140 20 x 20
2
size selection. Use the charts on the left to
(1178) (533) (454) (25) (64) (508 x 508) determine filter factor (F).
523⁄8 23 197⁄8 1 181 20 x 25
BSQ-140 - 140HP 2
(1330) (584) (505) (25) (82) (508 x 635)
51 ⁄8
3
26 22 ⁄8
7
1 294 20 x 20
BSQ-160 - 160HP 4
(1305) (660) (581) (25) (133) (508 x 508)
55 ⁄16
1
28 23 ⁄8
7
1 ⁄2
1
344 20 x 25
BSQ-180 - 180HP 4
(1399) (711) (606) (38) (156) (508 x 635)
12 x 25 Model Size 1 in.
3 1 in. 2 in. 2 in.
6611⁄16 32 277⁄8 11⁄2 441 (305 x 635) Aluminum
BSQ-200 - 200HP Paper Aluminum Paper
(1694) (813) (708) (38) (200) 16 x 25 Filter
3 SQ BSQ Filters Filters Filters
(406 x 635)
Factor (F)
20 x 25
4 60-65-70-75 — 186 318.06 251.1 303.18
687⁄8 39 347⁄8 11⁄2 573 (508 x 635)
BSQ-240 - 240HP 80-85-90-95 70-80-90 21.8 37.278 29.43 35.534
(1749) (991) (886) (38) (260) 16 x 25
4
(406 x 635) 100 100 8.72 14.9112 11.772 14.2136
72 ⁄8
1
46 41 ⁄8
7
1 ⁄2
1
759 20 x 25 120 120 5.58 9.5418 7.533 9.0954
BSQ-300 - 300HP 8
(1832) (1168) (1064) (38) (344) (508 x 635)
130 130 5.58 9.5418 7.533 9.0954
16 x 25
10 140 140 3.57 6.1047 4.8195 5.8191
791⁄4 52 477⁄8 11⁄2 957 (406 x 635)
BSQ-360 - 360HP 160 160 2.09 3.5739 2.8215 3.4067
(2013) (1321) (1216) (38) (434) 20 x 25
5 — 180 1.34 2.2914 1.809 2.1842
(508 x 635)
16 x 25 — 200 0.77 1.3167 1.0395 1.2551
5
931⁄8 58 537⁄8
11⁄2 1185 (406 x 635) — 240 0.41 0.7011 0.5535 0.6683
BSQ-420
(2365) (1473) (1368) (38) (538) 20 x 25 — 300 0.33 0.5643 0.4455 0.5379
10
(508 x 635)
Note: 24-inch side clearance is recommended for accessing and removing filters.
— 360 0.15 0.2565 0.2025 0.2445
All dimensions in inches (millimeters) and weight (WT.) in pounds (kilograms). — 420 0.13 0.2223 0.1755 0.2119
8
Horizontal and Vertical Mounting
Options
C C
E E
All model SQ and model BSQ fans can be mounted either horizontally A or vertically.
A For ease of installation,
knockouts are provided at each location A where
C mounting
A Cbrackets
F are shown
F in figures 6, 7, and
A 8. Optional
B A B F
brackets are universally adjustable to mount in any of these locations.
Complete isolator kits are available with either neoprene or spring isolators and are sized to match the
weight of the individual fan sizes. The hanging isolator support brackets are designed to permit mounting of
the fan with the motor located on top, bottom, or side. The hanging rods are to be supplied by others. The
base isolator support brackets are designed to permit mounting of the fan Awith the motor A
located on top or
either side. C A C A F F B A B A
E E
C C B
Horizontal Hanging or Base Mount Vertical Hanging or Base Mount
C C C B B B D B D B
E E E C E E E B
A A A E E
A A A A
A
AF A B A B A F B
C A F C
F
F A F B F
F
Isolator I.D.-BVI D
D B B
Isolator I.D.-BVI
A A A A A A
A A
A C AF C F F B A B A B A FB F F
F
A F A
E E E E E E
E B B E
C C C B B B
C B
Figure 6 B D B D
With a hanging mount, the motor mayD be B Figure
D 7 D Figure 8
B B D
located on either top or bottom. The base With either a hanging or base mount B
the Mounting brackets are turned 90° for vertical
mount allows top motor location only. Both motor may be located on either side. The mounting. Access panels are located on the
provide access panel on two sides. base mount allows top access panels only. two sides adjacent to mounting brackets.
D B D B D B
Standing Neoprene Isolator
D B Hanging Neoprene Isolator
G
G
G H G
H H
H
H
N
H
H H
L
B B B N
N NL
B L L
B D B D B D B
D
M M
K M
K K
5/8 in. Nominal M
I 5/8 in. Nominal
K K 5/8 in. Nominal
I K
I K
5/8 in. Nominal
I K
J
J
J
J
Model A B C D E F G H I J K L M N
SQ 60-75 10 ⁄8 (270)
5
17 (432) 15 ⁄4 (400)3
87⁄8 (225) 19 ⁄4 (502)
3
7 (178)
SQ 80-95 131⁄4 (337) 20 (508) 183⁄4 (476) 117⁄8 (302) 43 (1092) 273⁄8 (695)
BSQ 70-90 185⁄8 (473) 201⁄8 (511) 183⁄4 (476) 117⁄8 (302) 485⁄16 (1227) 273⁄8 (695)
2 13⁄8 51⁄2 2 13⁄8 2 63⁄4 25⁄16
SQ-BSQ 100 185⁄8 (473) 221⁄8 (562) 203⁄4 (527) 137⁄8 (352) 447⁄8 (1140) 24 (610)
(51) (35) (140) (51) (35) (51) (171) (59)
SQ-BSQ 120 185⁄8 (473) 24 (610) 223⁄4 (578) 16 (406) 493⁄8 (1254) 281⁄8 (714)
SQ-BSQ 130 185⁄8 (473) 261⁄8 (664) 243⁄4 (629) 177⁄8 (454) 44 (1118) 23 (584)
SQ-BSQ 140 195⁄8 (498) 281⁄8 (714) 263⁄4 (679) 197⁄8 (505) 501⁄16 (1272) 28 (711)
SQ-BSQ 160 231⁄2 (597) 31 (787) 293⁄4 (756) 227⁄8 (581) 495⁄8 (1260) 235⁄8 (600)
BSQ 180 251⁄2 (648) 331⁄2 (851) 299⁄16 (751) 223⁄4 (578) 529⁄16 (1335) 241⁄2 (622)
BSQ 200 291⁄8 (740) 37 (940) 333⁄4 (857) 263⁄4 (679) 643⁄16 (1630) 321⁄4 (819)
2 13⁄8 51⁄2 2 13⁄8 2 63⁄4 25⁄8
BSQ 240 315⁄8 (803) 441⁄4 (1124) 403⁄4 (1035) 337⁄8 (860) 661⁄2 (1689) 321⁄8 (816)
(51) (35) (140) (51) (35) (51) (171) (67)
BSQ 300 35 (889) 51 (1295) 473⁄4 (1213) 407⁄8 (1038) 691⁄8 (1756) 313⁄8 (797)
BSQ 360 383⁄4 (974) 571⁄4 (1454) 531⁄2 (1359) 463⁄4 (1187) 76 (1930) 3411⁄16 (881)
BSQ 420 471⁄8 (1197) 63 (1600) 597⁄8 (1521) 597⁄8 (1521) 901⁄2 (2299) 401⁄2 (1029)
All dimensions in inches (millimeters).
9
Typical Installation
Model BSQ ducted inline fans are designed for the exhaust, supply, or recirculation of air in a building.
Typical installation requires ductwork on the inlet and outlet side of the fan. A minimum of three duct
diameters is required on the inlet and outlet of the fan to prevent system effect losses. See the diagram
below for a typical installation.
Installations can include flexible duct connections (by others) on either the inlet or outlet side of the fan or
both. The motor is rigid mounted and can be oriented in any direction (top, bottom, side).
The model BSQ ducted inline fan must be installed with the motor accessible for maintenance and
inspection.
External isolators are recommended, hanging (shown below) or base mounted.
Installation must meet all local governing codes and the NEC.
3 Wheel 3 Wheel
Diameters Diameters
BSQ - 240 HP - 7
Model Configuration
Motor HP (Belt Drive only)
6 = 1/6 7 = 3/4 30 = 3
Bsq - Belt Drive Inline Exhaust
4 = 1/4 10 = 1 50 = 5
SQ - Direct Drive Inline Exhaust 3 = 1/3 15 = 11⁄2 75 = 71⁄2
5 = 1/2 20 = 2 100 = 10
Fan Size
60 through 420 Motor RPM (Direct Drive only)
A = 1725 D = 1550
B = 1140 E = 1050
Pressure Level (Belt Drive Only) C = 860 G = 1300
HP - High Pressure Wheel
10
SQ 60-65 - Direct Drive
1
(25)
110 0.45
RPM
100 0.40 Density 0.075 lb/ft3
90
*87⁄8 0.35 SQ
(225) 80 -6
Static Pressure Pa
70
(305)
SQ
0.25
-6
60
5-
D
SQ
50 0.20 -6
0-
G
SQ
40 -6
12 13 0.15 5-
G
(305) (330) 30 SQ
-6 SQ
0.10 5- -6
E 0-
20 E
0.05
10
Damper size = 9 x 9 (229 x 229)
Unit weight** = 26 (12) 0 0.00
0 50 100 150 200 250
Housing thickness = 20 ga
Outlet velocity = 1.828 x cfm cfm
Dimensions shown in inches (millimeters) and weight is
0 50 100 150 200 250 300 350 400
shown in pounds (kilograms).
3
*May be greater depending on motor. m /hr
**Weight shown is largest cataloged Open Drip Proof motor.
Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories).
The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation
type B: free inlet hemispherical fan sone levels.
11
SQ 70-75 - Direct Drive
1
(25) 0.45
110
RPM
100 0.40 Density 0.075 lb/ft3
90
*87⁄8 0.35
SQ
(225) 80
-7
0.30
Static Pressure Pa
0-
12
D
70 SQ
(305) -7
0.25 5-
60 D
SQ
50 0.20 SQ
-7
-7
0-
5-
G
40 SQ G
12 0.15
13 -7
0-
(305) (330) 30 SQ E
0.10 -7
5-
20 E
0.05
10
Damper size = 9 x 9 (229 x 229)
Unit weight** = 26 (12) 0 0.00
0 50 100 150 200 250 300 350 400
Housing thickness = 20 ga
Outlet velocity = 1.828 x cfm cfm
Dimensions shown in inches (millimeters) and weight is
shown in pounds (kilograms). 0 100 200 300 400 500 600
*May be greater depending on motor. 3
m /hr
**Weight shown is largest cataloged Open Drip Proof motor.
Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories).
The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation
type B: free inlet hemispherical fan sone levels.
12
SQ 80-85 - Direct Drive
1
(25)
0.7
RPM
160 Density 0.075 lb/ft3
0.6
*117⁄8 140
(302) 0.5
Static Pressure Pa
15
SQ
(381) 100 0.4 -8
0-
D SQ
-8
80 SQ 5-
0.3 D
-8
0-
G
15 60 SQ
16 SQ -8
(381) 0.2 5-
(406) -8 G
40 0-
E SQ
0.1 -8
20 5-
E
Damper size = 12 x 12 (305 x 305)
Unit weight** = 41 (19) 0 0.0
0 100 200 300 400 500 600
Housing thickness = 20 ga
Outlet velocity = 1.021 x cfm cfm
Dimensions shown in inches (millimeters) and weight is
shown in pounds (kilograms). 0 200 400 600 800 1000
*May be greater depending on motor. m /hr
3
**Weight shown is largest cataloged Open Drip Proof motor.
Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories).
The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation
type B: free inlet hemispherical fan sone levels.
13
SQ 90-95 - Direct Drive
1
(25)
0.8
RPM
180 Density 0.075 lb/ft3
0.7
160
*117⁄8
0.6
(302) SQ SQ
Static Pressure Pa
0-
15 0.5 D D
120
(381)
100 0.4 SQ
SQ -9
-9 0-
5- G
80 G
0.3
15 16 60
(381) (406) SQ SQ
0.2 -9 -9
5- 0-
40 E E
0.1
20
Damper size = 12 x 12 (305 x 305)
Unit weight** = 41 (19) 0 0.0
Housing thickness = 20 ga 0 100 200 300 400 500 600 700 800 900 1000
Outlet velocity = 1.021 x cfm cfm
Dimensions shown in inches (millimeters) and weight is
shown in pounds (kilograms). 0 200 400 600 800 1000 1200 1400 1600
*May be greater depending on motor. 3
**Weight shown is largest cataloged Open Drip Proof motor.
m /hr
Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories).
The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation
type B: free inlet hemispherical fan sone levels.
14
SQ 100 - Direct Drive
1
(25)
1.2
RPM
RVE
Density 0.075 lb/ft3
CU
250 1.0
*137⁄8
M
STE
(352)
SY
17 200 0.8
Static Pressure Pa
17
25
HIS
(432)
FT
TO
150 0.6
EF
EL
TH
17 21 100 0.4
TO
(432) (533) 11
CT
40
LE
50 0.2
SE
86
NO
T
0
Damper size = 14 x 14 (356 x 356) DO
Unit weight** = 56 (25) 0 0.0
0 200 400 600 800 1000 1200 1400 1600
Housing thickness = 20 ga
Outlet velocity = 0.748 x cfm cfm
Dimensions shown in inches (millimeters) and weight is
shown in pounds (kilograms). 0 500 1000 1500 2000 2500
*May be greater depending on motor. 3
m /hr
**Weight shown is largest cataloged Open Drip Proof motor.
Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories).
The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation
type B: free inlet hemispherical fan sone levels.
15
SQ 120 - Direct Drive
1
(25)
1.8
E
URV
RPM
400 1.6 Density 0.075 lb/ft3
C
TEM
*157⁄8 350 1.4
SYS
(403)
Static Pressure Pa
HIS
19 17
25
FT
(483)
250 1.0
TO
EF
200 0.8
EL
TH
19 21 150 0.6
TO
(483) 11
(533)
CT
40
LE
100 0.4
SE
86
T
0
O
50 0.2
N
Damper size = 16 x 16 (406 x 406) DO
Unit weight** = 67 (30) 0 0.0
Housing thickness = 20 ga 0 400 800 1200 1600 2000
Outlet velocity = 0.571 x cfm cfm
Dimensions shown in inches (millimeters) and weight is
shown in pounds (kilograms). 0 500 1000 1500 2000 2500 3000
*May be greater depending on motor. 3
**Weight shown is largest cataloged Open Drip Proof motor. m /hr
Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories).
The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation
type B: free inlet hemispherical fan sone levels.
16
SQ 130 - Direct Drive
1
(25)
1.8
RPM
VE
400 1.6 Density 0.075 lb/ft3
UR
*177⁄8
C
350 1.4
TEM
(454)
YS
21 300 1.2
Static Pressure Pa
S
17
HIS
(533) 25
250 1.0
FT
TO
200 0.8
EF
EL
21 21
TH
150 0.6
(533)
TO
(533) 11
40
CT
100 0.4
LE
SE
50 0.2 T 86
Damper size = 18 x 18 (457 x 457) NO 0
DO
Unit weight** = 67 (35) 0 0.0
Housing thickness = 20 ga 0 500 1000 1500 2000 2500
Outlet velocity = 0.451 x cfm cfm
Dimensions shown in inches (millimeters) and weight is
shown in pounds (kilograms). 0 500 1000 1500 2000 2500 3000 3500 4000
*May be greater depending on motor. 3
**Weight shown is largest cataloged Open Drip Proof motor. m /hr
Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories).
The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation
type B: free inlet hemispherical fan sone levels.
17
SQ 140 - Direct Drive
1
(25)
2.1
500
RPM
E
Density 0.075 lb/ft3
URV
1.8
C
*197⁄8
EM
(505) 400
T
1.5
SYS
17
23
Static Pressure Pa
25
HIS
(584)
300 1.2
O FT
FT
0.9
LE
200
E
23
TH
22
(584)
O
(559) 0.6
TT
11
40
EC
100
L
SE
0.3
86
T
Damper size = 20 x 20 (508 x 508) NO 0
DO
Unit weight** = 104 (47) 0 0.0
Housing thickness = 18 ga 0 500 1000 1500 2000 2500 3000 3500
Outlet velocity = 0.364 x cfm cfm
Dimensions shown in inches (millimeters) and weight is
shown in pounds (kilograms). 0 1000 2000 3000 4000 5000
*May be greater depending on motor. 3
**Weight shown is largest cataloged Open Drip Proof motor. m /hr
Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories).
The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation
type B: free inlet hemispherical fan sone levels.
18
SQ 160 - Direct Drive
1
(25)
2.8
RVE
RPM
Density 0.075 lb/ft3
M CU
600 2.4
*227⁄8
YSTE
(581) 500 2.0
IS S
26
Static Pressure Pa
17
25
F TH
(660)
400 1.6
FT O
LE
300 1.2
HE
OT
26 26 200 0.8
TT
(660) (660) 11
EC
40
EL
100 0.4
TS
86
NO
Damper size = 23 x 23 (584 x 584) 0
DO
Unit weight** = 160 (73) 0 0.0
0 1000 2000 3000 4000 5000 6000
Housing thickness = 18 ga
Outlet velocity = 0.275 x cfm cfm
Dimensions shown in inches (millimeters) and weight is
shown in pounds (kilograms). 0 2 4 6 8 10
*May be greater depending on motor. 3
m /hr X 1000
**Weight shown is largest cataloged Open Drip Proof motor.
Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories).
The sound ratings shown are loudness values in fan sones at 1.5 m (5 feet) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation
type B: free inlet hemispherical fan sone levels.
19
BSQ 70 - Belt Drive
*151⁄2 *14
(394) (356)
2.5
600
VE
RPM
M CUR
1/
1/ HP
3
2
hp
hp
Density 0.075 lb/ft3
2.0
SYSTE
1 (25) 1/4
hp
F THIS
Static Pressure Pa
400
(318) 1.5
EFT O
24
117⁄8 86
THE L
(302)
1.0 21
50
15
O
200
CT T
(381) 18
10
ELE
0.5
14
70
TS
113
NO
0
790
DO
0 0.0
15 21 0 100 200 300 400 500 600
(381) (533) cfm
0 200 400 600 800 1000
Damper size = 12 x 12 (305 x 305) 3
Unit weight** = 76 (34) m /hr
Housing thickness = 20 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*151⁄2 *14
(394) (356)
3.0
E
700 RPM
CURV
3/
4
1/ HP
hp
2.5 2h Density 0.075 lb/ft3
p
M
600
YSTE
1 (25) 1/
HIS S
500 2.0
Static Pressure Pa
*12 ⁄2
1
1/4
26
(318) hp
OF T
45
400
1.5
T
117⁄8
22
LEF
70
(302) 300
HE
19
1.0 00
OT
15
200
TT
(381) 15
30
C
LE
0.5
SE
100 116
0
T
NO
79
0
0.0 D
O
0
0 200 400 600 800 1000 1200
15 21
(381) cfm
(533)
0 500 1000 1500 2000
3
Damper size = 12 x 12 (305 x 305) m /hr
Unit weight** = 79 (36)
Housing thickness = 20 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*151⁄2 *14
(394) (356)
3.0
700
E
1h RPM
URV
3/ p HP
4
2.5 hp Density 0.075 lb/ft3
EM C
1 (25) 600 1/
2
hp
YST
Static Pressure in. wg
*12 ⁄2
1
500 2.0
Static Pressure Pa
IS S
(318) 1/
26
1/
F TH
4 3
91
400 hp hp
117⁄8 1.5
TO
23
(302) 10
LEF
300
E
15 1.0
TH
19
(381) 30
TO
200
T
15
EC
50
0.5
L
100
SE
11
70
T
790
O
N
O
0 0.0 D
15 21 0 200 400 600 800 1000 1200 1400 1600 1800
(381) (533) cfm
0 500 1000 1500 2000 2500 3000
Damper size = 12 x 12 (305 x 305) 3
m /hr
Unit weight** = 84 (38)
Housing thickness = 20 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*151⁄2 *14
(394) (356)
3.0
1
700 hp
3/ RPM
4
hp HP
RVE
2.5 Density 0.075 lb/ft3
600 1/
1 (25) 2h
CU
p
EM
Static Pressure in. wg
*12 ⁄2
1
500 2.0
Static Pressure Pa
ST
(318)
SY
1/
3h
HIS
400 1/ p
4
137⁄8 1.5 hp
25
OF
56
(352) 22
FT
300 10
LE
17 1.0
E
TH
(432) 18
200 55
TO
CT
0.5 15
00
LE
100
SE 11
T 45
NO 79
DO 0
0 0.0
17 21 0 500 1000 1500 2000 2500
(432) (533) cfm
0 1000 2000 3000 4000
Damper size = 14 x 14 (357 x 357) 3
m /hr
Unit weight** = 83 (38)
Housing thickness = 20 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*177⁄8 *16
(454) (406)
4.0
1
RPM
1/
900
RVE
2
HP
hp
3.5
hp
Density 0.075 lb/ft3
CU
800
1 (25)
3/
3.0
EM
4
hp
Static Pressure in. wg
700
ST
*12 ⁄2
1
Static Pressure Pa
SY
(318) 2.5
600 1/
HI S
2
1/ hp
3
FT
500 2.0 hp
157⁄8
24
TO
90
(403)
EF
400 1/4
hp
EL
1.5 21
19 50
TH
300
(483) 18
TO
1.0 10
CT
200 14
LE
70
SE
0.5 T
100 NO 11
30
DO 79
0
0 0.0
19 21 0 500 1000 1500 2000 2500 3000
(483) (533) cfm
0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000
Damper size = 16 x 16 (406 x 406) 3
m /hr
Unit weight** = 97 (44)
Housing thickness = 20 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*177⁄8 *16
(454) (406)
3.0
11
VE
700 RPM
/2
1h
CUR
HP
hp
p
3/
2.5 Density 0.075 lb/ft3
4
600
EM
hp
1 (25)
T
SYS
Static Pressure in. wg
1/
*121⁄2 500 2.0
Static Pressure Pa
2
hp
THIS
1/
(318)
23
3
55
hp
400
OF
177⁄8 1.5
EF T
20
1/
(454) 50
4
hp
L
300 17
HE
21 1.0 35
OT
(533) 200 14
T
20
CT
LE
0.5
SE
100 11
05
OT
79
0
N
DO
0 0.0
21 21 0 500 1000 1500 2000 2500 3000 3500
(533) (533) cfm
0 1000 2000 3000 4000 5000
Damper size = 18 x 18 (457 x 457) 3
m /hr
Unit weight** = 97 (44)
Housing thickness = 20 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*177⁄8 *16
(454) (406)
1100 4.5
RPM
E
URV
1000 4.0 HP
11 Density 0.075 lb/ft3
C
900 /2
hp
EM
1 (25) 3.5
3/
1
4
YST
hp
800
hp
Static Pressure in. wg
*121⁄2 3.0
Static Pressure Pa
S
700 27
THIS
(318)
1/
70
2
2.5
hp
600
OF
23
177⁄8 90
EFT
500 2.0 1/
(454) 3
1/
EL
hp
4
400 19
hp
TH
21 1.5 90
TO
(533) 300
CT
1.0 15
90
LE
200
SE
0.5
100 11
OT
N 79 90
DO 0
0 0.0
0 500 1000 1500 2000 2500
21 21
(533) (533) cfm
0 500 1000 1500 2000 2500 3000 3500 4000
Damper size = 18 x 18 (457 x 457) 3
m /hr
Unit weight** = 97 (44)
Housing thickness = 20 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*177⁄8 *16
(454) (406)
3.5 2
hp
800 1 RPM
1/ HP
VE
3.0 2
1 hp Density 0.075 lb/ft3
CUR
700 hp
1 (25)
EM
2.5
T
3/
Static Pressure Pa
SYS
*121⁄2 1/ 4
21
2 hp
53
(318) hp
H IS
500 2.0
FT
18
197⁄8 400 1/
TO
90
1.5 3
(505) hp
F
LE
300
16
1/
E
23
15
4
TH
1.0 hp
(584)
O
200
13
T
40
CT
LE
0.5
10
100
SE
65
79
OT 0
ON
0 0.0 D
0 500 1000 1500 2000 2500 3000 3500 4000 4500
23 22
(584) (559) cfm
0 1000 2000 3000 4000 5000 6000 7000
Damper size = 20 x 20 (508 x 508) 3
m /hr
Unit weight** = 111 (50)
Housing thickness = 18 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*177⁄8 *16
(454) (406)
5
1200 1
1/
2
2
hp
E
hp RPM
URV
1 HP
hp
C
1000 4 Density 0.075 lb/ft3
TEM
1 (25)
SYS
Static Pressure Pa
*121⁄2 800
HIS
3 3/
(318) 4
1/ hp
T
2
26
OF
hp
41
600 22
197⁄8
T
70
LEF
(505) 2 1/
HE
3
400 hp
23
OT
19
00
T
(584)
CT
1 15
LE
200 30
SE
11
T
O
N 79 60
DO 0
0 0
0 500 1000 1500 2000 2500 3000 3500
23 22
(584) (559) cfm
0 1000 2000 3000 4000 5000
Damper size = 20 x 20 (508 x 508) 3
m /hr
Unit weight** = 111 (50)
Housing thickness = 18 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*201⁄2 *17
(521) (432)
4.0
2
hp RPM
900
1
HP
1/
3.5
2
Density 0.075 lb/ft3
E
hp
RV
800
CU
1 (25) 3.0
1 20
M
3/
TE
Static Pressure Pa
4
*13 ⁄8
hp
3
2.5
S
600
SY
(340)
1/
HIS
2 17
500 2.0 hp 10
FT
22 ⁄8
7
O
(581) 400 1
FT
1.5 1 /3
LE
/4 hp 14
26 hp 30
E
300
TH
(660) 1.0
TO
11
200 50
T
EC
L
100
0.5 SE 87
0
OT
59
D ON 0
0 0.0
0 1000 2000 3000 4000 5000 6000
26 26
(660) (660) cfm
0 1 2 3 4 5 6 7 8 9 10
Damper size = 23 x 23 (584 x 584) 3
m /hr X 1000
Unit weight** = 208 (94)
Housing thickness = 18 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*201⁄2 *17
(521) (432)
5
1200
3
VE
hp RPM
2
CUR
1 hp HP
1/ Density 0.075 lb/ft3
1000 4 2
hp
TEM
1 (25)
SY S
23
Static Pressure Pa
*133⁄8 800 1 21
hp
S
3
THI
(340) 3/
4 19
hp 90
OF
600
227⁄8
T
1/
LEF
2
(581) 2 1/ hp
3 16
HE
hp 65
26 400
OT
(660) 13
TT
40
1
EC
200
L
10
SE
15
T
69
O
N 0
DO
0 0
0 1000 2000 3000 4000 5000
26 26
(660) (660) cfm
0 2000 4000 6000 8000
Damper size = 23 x 23 (584 x 584) 3
m /hr
Unit weight** = 208 (94)
Housing thickness = 18 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*243⁄8 *18
(619) (457)
3.0
700
3
RPM
hp
E
2
HP
V
11
hp
CUR
2.5 Density 0.075 lb/ft3
/2
600
hp
TEM
11⁄2 (38) 16
S YS
500 2.0
Static Pressure Pa
1
*13 ⁄4
3
hp
1/
HIS
3/
(349)
4
hp
hp
14
FT
400
1.5 30
TO
237⁄8
1/
EF
12
3
(606) 300
hp
20
EL
1.0
TH
28 10
10
O
(711) 200
C TT
80
LE
0.5
100 0
SE
59
NO
T
0
DO
0 0.0
0 1000 2000 3000 4000 5000 6000 7000
28 28
(711) (711) cfm
0 2 4 6 8 10
Damper size = 24 x 24 (610 x 610) 3
m /hr X 1000
Unit weight** = 245 (111)
Housing thickness = 18 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*243⁄8 *18
(619) (457)
4.0
2 3
hp
RVE
hp RPM
900
M CU
3.5 1 HP
1/ Density 0.075 lb/ft3
800 2
hp
YSTE
11⁄2 (38) 3.0
IS S
hp
Static Pressure Pa
19
*133⁄4 2.5 3/
F TH
13
600 4
(349) hp
TO
500 2.0 1/
237⁄8
LEF
2
16
hp
50
(606) 400
HE
1.5
13
OT
28 300 85
TT
(711) 1.0
EC
200 11
20
EL
85
TS
0.5 5
100
NO
59
DO 0
0 0.0
0 1000 2000 3000 4000 5000 6000
28 28
(711) (711) cfm
0 1 2 3 4 5 6 7 8 9 10
Damper size = 24 x 24 (610 x 610) 3
m /hr X 1000
Unit weight** = 245 (111)
Housing thickness = 18 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*28 *20
(711) (508)
3.0
700 RPM
HP
VE
3
2.5 Density 0.075 lb/ft3
hp
UR
600
C
11⁄2 (38)
EM
Static Pressure in. wg
2
hp
1
500 2.0
ST
Static Pressure Pa
1/
*16
2
13
SY
hp
(406) 75
IS
hp
400
3/
TH
4
1.5
1/
11
hp
277⁄8
OF
90
hp
FT
(708) 300
1/
LE
3
1.0
hp
E
32 99
TH
200 0
(813)
TO
79
CT
0.5 0
LE
100 SE 59
T 0
NO 39
D O 0
0 0.0
0 1000 2000 3000 4000 5000 6000 7000 8000
32 32
(813) (813) cfm
0 2 4 6 8 10 12
Damper size = 28 x 28 (711 x 711) 3
m /hr X 1000
Unit weight** = 314 (142)
Housing thickness = 18 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*28 *20
(711) (508)
3.5
3
RVE
800 hp RPM
2 HP
CU
3.0 hp
1 Density 0.075 lb/ft3
700
TEM
1/
11⁄2 (38) 2
hp
SYS
2.5
Static Pressure Pa
*16 1 02
THIS
3/ hp
(406) 4
500 2.0 1/ hp
2
OF
hp 13
50
27 ⁄8
7
EFT
400
(708) 1.5
L
11
HE
300 10
32
OT
1.0
T
(813)
CT
200 87
0
LE
0.5
SE
100 63
T
0
NO
39
DO 0
0 0.0
0 1000 2000 3000 4000 5000 6000 7000
32 32
(813) (813) cfm
0 2 4 6 8 10
Damper size = 28 x 28 (711 x 711) 3
m /hr X 1000
Unit weight** = 314 (142)
Housing thickness = 18 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*327⁄8 *22
(835) (559)
3.0 5
hp
700 RPM
HP
VE
2.5 Density 0.075 lb/ft3
CUR
600 2 3
hp hp
11⁄2 (38)
EM
Static Pressure in. wg
YST
500 2.0
Static Pressure Pa
*19 1 1
IS S
hp
12
(483) 1/
2
25
hp
TH
400
1.5
34 ⁄8
OF
7
1/ 3/
10
2
FT
(886) 300 hp 4 h
70
p
LE
1.0
90
39
TH
0
(991) 200
TO
73
0
CT
0.5
LE
100 56
SE
T 0
NO 39
0
DO
0 0.0
0 2 4 6 8 10 12 14
39 34
(991) (864) cfm X 1000
0 5 10 15 20
Damper size = 35 x 35 (889 x 889) 3
m /hr X 1000
Unit weight** = 415 (188)
Housing thickness = 18 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*327⁄8 *22
(835) (559)
5
1200
RPM
HP
VE
Density 0.075 lb/ft3
CUR
7
1/
1000 4
5
11⁄2 (38)
2
hp
hp
3
TEM
hp
Static Pressure in. wg
*19
SYS
Static Pressure Pa
800
2
(483) 3
hp
HIS
16
1
1/
05
FT
2
347⁄8 13
hp
600
TO
60
(886)
EF
2
1
hp
EL
39 11
400 20
TH
(991)
O
TT
1 88
EC
200 0
L
SE
64
0
NO40
T
DO 0
0 0
39 34 0 2 4 6 8 10 12
(991) (864) cfm X 1000
0 5 10 15 20
Damper size = 35 x 35 (889 x 889) 3
m /hr X 1000
Unit weight** = 415 (188)
Housing thickness = 18 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*34 *22
(864) (559)
3.0
700 RPM
E
URV
HP
2.5 Density 0.075 lb/ft3
MC
600
11⁄2 (38)
7
5
3
1/
hp
TE
hp
2
Static Pressure in. wg
hp
SYS
*18 500 2.0
Static Pressure Pa
1
(457)
S
2 hp
1/
THI
hp
2
400
OF
417⁄8 1.5
T
(1064) 96
LEF
85
7
hp
300
5
46
E
1.0
TH
73
3/
(1168) 5
4
200
TO
hp
CT
61
5
0.5
LE
100 49
SE
5
T
NO
37
DO
5
0 0.0
46 38 0 5 10 15 20 25
(1168) (965) cfm X 1000
0 10 20 30 40
Damper size = 42 x 42 (1067 x 1067) 3
m /hr X 1000
Unit weight** = 537 (244)
Housing thickness = 16 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*34 *22
(864) (559)
1100 4.5
RPM
1000
E
4.0 HP
V
CUR
71 Density 0.075 lb/ft3
900 /2
11⁄2 (38) 3.5 5h hp
TEM
p
800
SY S
*18 3.0
Static Pressure Pa
700 11
(457) 3h 96
HI S
2.5 2h p
600 p
FT
10
417⁄8 40
TO
500 2.0 11
(1064) /2
EF
hp
EL
400 88
46 1.5 0
TH
(1168) 300
TO
77
1.0 0
CT
200
LE
56
SE
0.5 T 0
100 40
NO 0
DO
0 0.0
46 38 0 2 4 6 8 10 12 14
(1168) (965) cfm X 1000
0 2 4 6 8 10 12 14 16 18 20 22
Damper size = 42 x 42 (1067 x 1067) 3
m /hr X 1000
Unit weight** = 537 (244)
Housing thickness = 16 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*34 *22
(864) (559)
3.0
10
700 7 hp RPM
1/
2 HP
hp
2.5 Density 0.075 lb/ft3
E
600
RV
11⁄2 (38) 5
CU
hp
M
*18 500 2.0
Static Pressure Pa
TE
(457)
S
3
SY
hp 81
400 1
HIS
1.5
47 ⁄8
7
FT
1
(1216) 1 1/ 2 h 70
O
300 hp 2 hp p 0
FT
52
LE
1.0
60
E
(1321) 200 0
TH
TO
0.5 50
T
0
EC
100
EL 40
0
TS 30
NO 0
0 0.0 DO
52 42 0 5 10 15 20 25
(1321) (1067) cfm X 1000
0 10 20 30 40
Damper size = 48 x 48 (1219 x 1219) 3
m /hr X 1000
Unit weight** = 686 (311)
Housing thickness = 16 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*34 *22
(864) (559)
1100 4.5
10
URVE
hp RPM
1000 4.0 HP
EM C
5 7 Density 0.075 lb/ft3
900 hp 1/
11⁄2 (38) 3.5 2
hp
SYST
800
Static Pressure Pa
3
HIS
700 hp
(457)
OF T
2.5
600
1 2 88
477⁄8 hp
T
1/ 0
LEF
500 2.0 2
(1216) hp
THE
400 77
52 1.5 5
TO
(1321) 300
T
1.0
EC
200 59
0
EL
TS
0.5 44
100 30 5
NO
0
DO
0 0.0
52 42 0 2 4 6 8 10 12 14 16
(1321) (1067) cfm X 1000
0 2 4 6 8 10 12 14 16 18 20 22 24 26
Damper size = 48 x 48 (1219 x 1219) 3
m /hr X 1000
Unit weight** = 686 (311)
Housing thickness = 16 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
*34 *22
(864) (559)
2.5
600 10
hp RPM
7
5 1/ HP
hp 2
RVE
hp Density 0.075 lb/ft3
2.0
11⁄2 (38)
CU
3
hp
M
*18
STE
Static Pressure Pa
400
(457)
SY
1.5 67
2 0
hp
HI S
60
53 ⁄8
7
FT
5
(1368)
TO
1.0 53
EF
5
58 46
EL
200 5
(1473)
TH
TO
0.5
T
39
EC
32 5
EL
S 5
OT
D ON
0 0.0
58 50 0 5 10 15 20 25 30
(1473) (1270) cfm X 1000
0 10 20 30 40 50
Damper size = 54 x 54 (1372 x 1372) 3
m /hr X 1000
Unit weight** = 789 (358)
Housing thickness = 14 ga
Dimensions shown in inches (millimeters) and weight is shown in
pounds (kilograms).
*Motor cover is optional. Size may be greater depending on motor.
**Weight shown is largest cataloged Open Drip Proof motor.
42
Belt Drive Specifications
43
Centrifugal Inline Guide
Model CSP centrifugal forward curved direct driven cabinet fans are for
clean air applications where low sound levels are desired. Capacities range
from 70 to 3,800 cfm (120 to 6,500 m3/hr) and up to 1 in. wg (250 Pa) of
static pressure.
Model BCF centrifugal forward curved belt drive fans are for use in supply,
exhaust, or return air applications. Designed in a low profile cabinet
with heights ranging from 11 to 23 in. (279 to 584 mm). Capacities range
from 170 to 3,330 cfm (290 to 56,00 m3/hr) for single fan models and
600 to 5,800 cfm (1020 to 9,900 m3/hr) for double fan models with up to
1.5 in. wg (370 Pa) of static pressure.
Model BDF centrifugal forward curved belt drive duct fans are designed
for use in supply, exhaust, or return air applications. Capacities range from
300 to 15,000 cfm (510 to 25,500 m3/hr) with up to 3 in. wg (740 Pa) of static
pressure.
Model SQ and BSQ centrifugal backward inclined belt or direct drive fans
are designed for clean air applications (intake, exhaust, return, or make-up
air systems) where space is a prime consideration. Capacities range from
30 to 27,000 cfm (50 to 45,900 m3/hr) and up to 4 in. wg (990 Pa) of static
pressure. Maximum operating temperature is 180°F (82°C).
Model TCB centrifugal backward inclined belt drive fans for higher
pressures. Capacities range from 360 to 24,000 cfm (600 to 40,800 m3/hr)
and up to 4.5 in. wg (1118 Pa) of static pressure. Maximum operating
temperature is 200°F (93°C).
Our Warranty
Greenheck warrants this equipment to be free from defects in material and workmanship for a period
of one year from the purchase date. Any units or parts which prove defective during the warranty
period will be replaced at our option when returned to our factory, transportation prepaid. Motors are
warranted by the motor manufacturer for a period of one year. Should motors furnished by Greenheck
prove defective during this period, they should be returned to the nearest authorized motor service
station. Greenheck will not be responsible for any removal or installation costs.
As a result of our commitment to continuous improvement, Greenheck reserves the right to change
Prepared to Support
specifications without notice. Green Building Efforts