Professional Documents
Culture Documents
Band Saw Blade Rack: ©2019 Cruz Bay Publishing, Inc. An Active Interest Media Company
Band Saw Blade Rack: ©2019 Cruz Bay Publishing, Inc. An Active Interest Media Company
Band Saw Blade Rack: ©2019 Cruz Bay Publishing, Inc. An Active Interest Media Company
Band Saw
Blade Rack
1!/2
#/4
1!/2
BACK
31
NOTE: Back is made
from #/4"-thick softwood.
Holder is 1!/2"-thick
softwood
BLADE HOLDER
a.
Band Saw Blade Storage 8!/2
SIDE
Storage of my band saw blades has always been difficult. The VIEW
uncoiled blades take up too much space while hanging on the 4
wall. So, I built the rack shown here to hold all my coiled blades.
The rack is made out of two pieces.The holder portion has holes !/4
drilled in it, and slots cut to the holes. It’s attached to a backer that 2!/2
mounts to the wall. Now, I can quickly and easily hang up my
4
coiled band saw blades. !/2" -dia. 1!/2
Bob Stanley 4!/2
1!/2
Van Wert, Ohio
1 WoodsmithPlans.com WS24009 ©2019 Cruz Bay Publishing, Inc. an Active Interest Media Company. All Rights Reserved.