Professional Documents
Culture Documents
Flashing Sounders Bexcs 110-05D - Bexdcs 110-05D: Product Bex (D) Cs 110-05D Sounder
Flashing Sounders Bexcs 110-05D - Bexdcs 110-05D: Product Bex (D) Cs 110-05D Sounder
FLASHING SOUNDERS
BExCS 110-05D | BExDCS 110-05D
Combination devices for visual and acoustic alarms
• Stainless steel protective cage and stainless steel mounting bracket for
360° positioning.
• Extremely intensive light reflection due to 5 joules xenon flash.
• 32 different tones incl. DIN tone, UKOOA/PFEER conformant, 2 externally
controllable tones (via plus or minus in DC version).
• Acoustic and visual signal can be controlled separately.
• Synchronised flash frequency (1 Hz) or alternating flash mode in system
operation.
• Highly resistant to corrosion and suitable for the toughest environments.
• Adjustable volume (except 12 V DC version).
• Flashing light is insensitive to vibration, impact and shock.
+70 °C
IP 67
–50 °C
protection operating
system temperature
P FA N N E N B E R G . C O M
TONE TABLE
STAGE STAGE
NO. DESCRIPTION – BASIC TONE NO. DESCRIPTION – BASIC TONE
2 3 2 3
1 Continuous tone 1000 Hz 31 11 Interrupted tone, 660 Hz
18 2 5
1000 Hz
Sweden SS031711 (air raid warning) 1.8 s 1.8 s
Alternating tone, UK BS5839-1 EN 54-3
0.25 s
21 17 5
0.25 s
(fire alarm, railway crossing) 800 Hz Sweeping, 1600 Hz
1s
19 2 5
France NFC48-265 1400 Hz
0.5 s
1200 Hz 3s
3 Slow whoop 2 5
Continuous tone,
0.5 s
500 Hz
20 660 Hz 2 5
Sweden SS031711 (all-clear signal)
1000 Hz 10 ms
4 Sweeping (fast) 6 5 554 Hz
Alternating tone, 0.5 s
800 Hz 10 ms 21 2 5
Sweden SS031711 440 Hz
0.5 s
5 Continuous tone 2400 Hz 3 27
554 Hz
2900 Hz 70 ms 22 Interrupted tone 2 5
6 Sweeping 7 5 0.875 s 0.875 s
2400 Hz 70 ms
800 Hz
2900 Hz 10 ms 23 Interrupted tone 6 5
7 Sweeping (fast) 10 5 0.25 s 0.25 s
2400 Hz 10 ms
1000 Hz 0.5 s
Sweeping (medium),
1200 Hz 3s 24 29 5
UK BS5839-1 0.5 s
8 Sweeping 2 5 800 Hz
500 Hz 3s 0.5 s
2900 Hz
800 Hz 1200 Hz
Sawtooth, DIN tone 33404-3 1s
14 Interrupted tone 4 5 31 11 1
0.25 s
800 Hz
15 Continuous tone 2 5 Slow whoop, Australian evacuation 1200 Hz 3.75 s
32 26 1
0.25 s
660 Hz alarm AS2220 500 Hz
16 Interrupted tone 150 150 18 5
EN 54-3
ms ms 1
factory setting
554 Hz
Alternating tone, EN 54-3
The sounder can be set externally to the respective tones of stage 2 & 3.
0.1 s
17 2 27
France NFS 32-001 (fire alarm) 440 Hz
0.4 s
Tone 2 is preset.
P FA N N E N B E R G . C O M
PRODUCTS EX SIGNALING DEVICES
DIMENSIONS
368 Ø 181
165
30 30
mounting holes 3x Ø 7
CONNECTION DIAGRAMS
sounder – AC sounder – DC
DC connections
AC connections
AC connections
DC connections
multi-pin connector for
alternating flash mode
multi-pin connector for
alternating flash mode
MANUFACTURER’S DECLARATION
We hereby declare that the explosion-protected flashing light with the type designation BExCS 110-05 D, BExDCS 110-05D
has been developed and manufactured in accordance with section 5.1.2 of EN 50014.
This declaration is based on compliance with the following regulations and standards:
94/9/EG CE conformity
EN 50014 Electrical equipment for areas at risk of explosions – General requirements
EN 50018 Pressure-resistant encapsulation “d”
EN 50281-1-1 Electrical equipment for use in areas with combustible dust
P FA N N E N B E R G . C O M