Professional Documents
Culture Documents
Seadoo Utopia 2 Step Ladder Conversion
Seadoo Utopia 2 Step Ladder Conversion
A Windline telescoping 2 step ladder can be installed in place of the original single step ladder.
Remove the 4 bolts holding each bracket to the underside of the hull.
Remove old ladder.
Place new ladder into the old brackets.
Reinstall old brackets.
On the new ladder, instead of using a press fit roll pin, just 2.5in hex bolts with lock washers. They will be long enough to
not allow the ladder to fall out.
The bolts can move around and spin freely in the posts of the ladder but will get aligned when lowering the ladder into
place.
Good Luck.