This document provides a checklist for reviewing welder qualification records according to Section IX of the 2001 ASME code. The checklist ensures records contain the welder's ID number, date of certification, applicable fabrication code and specifications, and project and contract details. It also verifies essential welding variables are documented as required and that non-destructive testing reports or mechanical test reports confirm the welder's qualifications within given thickness and diameter ranges.
This document provides a checklist for reviewing welder qualification records according to Section IX of the 2001 ASME code. The checklist ensures records contain the welder's ID number, date of certification, applicable fabrication code and specifications, and project and contract details. It also verifies essential welding variables are documented as required and that non-destructive testing reports or mechanical test reports confirm the welder's qualifications within given thickness and diameter ranges.
This document provides a checklist for reviewing welder qualification records according to Section IX of the 2001 ASME code. The checklist ensures records contain the welder's ID number, date of certification, applicable fabrication code and specifications, and project and contract details. It also verifies essential welding variables are documented as required and that non-destructive testing reports or mechanical test reports confirm the welder's qualifications within given thickness and diameter ranges.
CHECK LIST FOR THE REVIEW OF WELDER QULIFICATION RECORDS AS PER SECTON IX ,2001 EDITION
SL.NO. Parameter Acceptance criteria
Verify the following minimum
information on WQT Project Contractor shall indicate these in formations on Welder certification record Contract number 1 Applicable fabrication code and QP specifications Welder ID number Date of certification
2 Verify essential variables. As per QW-350 or QW-360 as applicable(attached).
RT report if qualified by NDT(Acceptance as per ASME Sec.IX) or test reports if 3 NDT/Mechanical tests qualified by Mechanical test as per QW-452.1. 4 Range of qualification. Thickness range as per QW-452.1 and diameter range as per 452.3
Specification: Title: Qualification of Welders and Welding Procedures 2 (Section 13.0), 10, and Yellow Book Course Id: None Core Group: None Gas Welders Revisions