Professional Documents
Culture Documents
IRIS NV Load Setting
IRIS NV Load Setting
IRIS NV Load Setting
Data
Parameter Parameter
1EA(PTM) 2EA(PTM) ”F164”
F164 7 9
110%
+ 7
PTM1
110%
+ + 9
PTM1 PTM2
Load Setting
JP9.1 +5V
JP9.2 AN1 weight signal input 1 (PTM1)
JP9.3 AN2 weight signal input 2 (PTM2)
JP9.4 0V
Load Setting
◆ Connection
PTM1
◆ Installation
Ä« ¹Ù´Ú
Car Bottom
Cushion
¹æÁø°í¹«
rubber
L L= about 15mm
½ºÅ©·ç
screw
60mm
BASE
Load Setting
or
Load Setting
◆ Setting (No-Load)
If F41 is set as 1, no-load self-learning will be done. If the self-learning is successful,
F41 will be changed into 0
If no-load self-learning done. Self-learning result was saved in F48
E E
E E
Value becomes
E 150~200 after zero load
setting
◆ Setting (Full-Load)
If F41 is set as 2, Full-load self-learning will be done. If the self-learning is successful,
F41 will be changed into 0
If Full-load self-learning done. Self-learning result was saved in F49
E E
E E
2
Value becomes
300~400 after full
E
320 load setting
F49
110% Switch