The document provides instructions for exchanging the PTFE frit in purge valves for 1100/1200 standard pump modules. Small leaks can occur in the gold seal, so the seal should be replaced after removing the valves more than once or twice. When replacing the frit, ensure the cutout side faces up to provide more surface area for solvent flow. The steps are to remove the capillary and waste tube, unscrew the valve, remove the plastic cap and gold seal, replace the old frit with a new one, replace the gold seal and cap, and reinstall the valve.
The document provides instructions for exchanging the PTFE frit in purge valves for 1100/1200 standard pump modules. Small leaks can occur in the gold seal, so the seal should be replaced after removing the valves more than once or twice. When replacing the frit, ensure the cutout side faces up to provide more surface area for solvent flow. The steps are to remove the capillary and waste tube, unscrew the valve, remove the plastic cap and gold seal, replace the old frit with a new one, replace the gold seal and cap, and reinstall the valve.
The document provides instructions for exchanging the PTFE frit in purge valves for 1100/1200 standard pump modules. Small leaks can occur in the gold seal, so the seal should be replaced after removing the valves more than once or twice. When replacing the frit, ensure the cutout side faces up to provide more surface area for solvent flow. The steps are to remove the capillary and waste tube, unscrew the valve, remove the plastic cap and gold seal, replace the old frit with a new one, replace the gold seal and cap, and reinstall the valve.
in place with a plastic cap. Small leaks Purge valve assembly can occur here, so you will need to replace the gold seal after the valves have been removed more than once or twice. Purge Valve When replacing the frit, make sure that Description Part No. the cutout side faces up, which provides more surface area on the side facing the 1100 Pump Start Up Kit G1311-68710 solvent flow. Includes 1 outlet cap, 2 PTFE frits, 4 piston seals, 1 outlet gold seal, 2 inlet filters, 1 cartridge for active inlet valve 1. Remove capillary and waste tube. PTFE frits, 5/pk 01018-22707 2. Use a 14 mm wrench to unscrew Gold seal, outlet 5001-3707 the valve. Outlet caps, 4/pk 5062-2485 3. Remove the plastic cap and the Purge valve assembly G1311-60009 gold seal. 4. Use tweezers to remove the old frit and install a new frit. 5. Replace the gold seal and the plastic cap. 6. Install the valve.
Tips & Tools
Realign the purge valve waste tube in the correct orientation during installation.