Professional Documents
Culture Documents
Gantry For Lifting Winch and Transfer
Gantry For Lifting Winch and Transfer
party operative
party control
Two plates, with the circuit breaker and differential protection (30mA),
interchangeable cable through a system of plug-in connectors:
- A plate equipped with elements for an electromechanical control of
the entire operative part in manual mode (electrical protections,
contactors, terminals).
- A platen for automated control and communicating (Ethernet and
modbus) composed of a Programmable Logic Control Industrial, a
dimensioned inverter for the drive motor and an HMI of 5.7 inches
and programmable Interconnecting minimum forward façade the
containment cabinet for controlling different operating cycles.
Manual control by button box. (Control unit with push buttons up / down
/ left / right / emergency stop)
Control console wired terminal block and withdrawable.
A safety limit sensor on the enclosure door and a safety relay which
allows the powering of the plate.
Item Qty designations and characteristics requested technical
A quick-fastening element connectors allowing rapid mounting cable
platinum by the student.