Professional Documents
Culture Documents
Caracterización de Las Propiedades Tribológicas de Los Recubrimientos Duros
Caracterización de Las Propiedades Tribológicas de Los Recubrimientos Duros
Caracterización de Las Propiedades Tribológicas de Los Recubrimientos Duros
REFERENCIAS BIBLIOGRÁFICAS
A-B-C-D
241
[Berger] M. Berger, U. Wiklund, M. Eriksson, H. Engqvist, S. Jacobson, “The
multilayer effect in abrasion-optimising the combination of hard and tough phases”,
Surf. Coat. Technol. 116-119 (1999) 1138-1144.
[Bull_3] S. J. Bull, “Failure mode maps in the thin film scratch adhesion test”,
Tribology International Vol. 30, No. 7 (1997) 491-497.
[Chang] Y.-Y. Chang, D.-Y. Wang, W. Wu, “Catalysis effect of metal doping on wear
properties of diamond-like carbon films deposited by a cathodic-arc activated deposition
process”, Thin Solid Films 420-421 (2002) 241-247.
[Chiu] M.-C. Chiu, W.-P. Hsieh, W.-Y. Ho, D.-Y. Wang, F.-S. Shieu, “Thermal
stability of Cr-doped diamond-like carbon films synthesized by cathodic arc
evaporation”, Thin Solid Films 476 (2005) 258-263.
[Doerner] M. F. Doerner, W. D. Nix, “A method for interpreting the data from depth-
sensing indentation instruments”, J. Mater. Res. 1 (1986) 601.
E-F-G-H
I-J-K-L
M-N-O-P
[Oliver_1] W.C. Oliver, G.M. Pharr, “An improved technique for determining hardness
and elastic modulus using load and displacement sensing indentation experiments”, J.
Mater. Res. 7 (1992) 1564-1582.
[Oliver_2] W. C. Oliver, G. M. Pharr, “Review Measurement of hardness and elastic
modulus by instrumented indentation: Advances in understanding and refinements to
methodology”, J. Mater. Res. 1 (2004) 3-20.
Q-R-S-T
[Sneddon] I. N. Sneddon, “The relation between load and penetration in the axisymetric
Boussinesq problem for a punch of arbitrary profile”, Int. J. Eng. Sci. 3 (1965) 47-57.
[Su_1] Y. L. Su, T.H. Liu, C. T. Su, T. P. Cho, “Effect of chromium contento n the dry
machining performance of magnetron sputtered CrxC coatings”, Mater. Sci. Eng. A364
(2004) 188-197.
U-V-W-X-Y-Z
[Wang] D.-Y. Wang, K.-W Weng, C.-L. Chang, W.-Y. Ho, “Synthesis of Cr 3C2
coatings for tribological applications”, Surf. Coat. Technol. 120-121 (1999) 622-628.
[Zhang_1] D. Zhang, T. C. Lei, F. Li, “Laser cladding of stainless steel with Ni-Cr 3C2
for improved wear performance”, Wear 251 (2001) 1372-1376.