This document contains a list of alarm codes, the corresponding alarm text, and the severity for each alarm. There are over 130 alarm codes listed, spanning from A000 to A132. The alarms cover a wide range of issues including sensor errors, calibration failures, input/output errors, communication failures, and other process instrumentation problems. The alarms are categorized as either high or low severity, with high severity alarms indicating more critical issues.
This document contains a list of alarm codes, the corresponding alarm text, and the severity for each alarm. There are over 130 alarm codes listed, spanning from A000 to A132. The alarms cover a wide range of issues including sensor errors, calibration failures, input/output errors, communication failures, and other process instrumentation problems. The alarms are categorized as either high or low severity, with high severity alarms indicating more critical issues.
This document contains a list of alarm codes, the corresponding alarm text, and the severity for each alarm. There are over 130 alarm codes listed, spanning from A000 to A132. The alarms cover a wide range of issues including sensor errors, calibration failures, input/output errors, communication failures, and other process instrumentation problems. The alarms are categorized as either high or low severity, with high severity alarms indicating more critical issues.
A000 Undefined High A001 EEprom Checksum Error (Core Processor) High A002 RAM Test Error (Core Processor) High A003 Sensor Not Responding (No Tube Interrupt) High A004 Temperature Sensor Out-of-Range High A005 Input Over-Range High A006 Transmitter Not Characterized, Combo of 20 & 21 High A007 Real-Time Interrupt Failure High A008 Density Outside Limits High A009 Transmitter Initializing/Warming Up High A010 Calibration Failure High A011 Excess Calibration Correction, Zero too Low High A012 Excess Calibration Correction, Zero too High High A013 Process too Noisy to Perform Auto Zero High A014 Transmitter Failed High A015 MA Readback Error High A016 Line RTD" Temperature Out-Of-Range High A017 Meter RTD" Temperature Out-Of-Range High A018 (E)EPROM Checksum Error (Model 1000/2000) High A019 RAM Test Error (Model 1000/2000) High A020 Calibration Factors Unentered High A021 Unrecognized/Unentered Sensor Type High A022 (E)EPROM Config. DB Corrupt (Core Processor) High A023 (E)EPROM Totals Corrupt (Core Processor) High A024 (E)EPROM Program Corrupt (Core Processor) High A025 Protected Boot Sector Fault High A026 Sensor/Xmtr Communication Error High A027 Security Breach High A028 Xmtr Write Error High A029 Communication failure Core/Trans High A030 Incompatible software type for hardware High A031 Low Power input to transmitter High A032 Meter Verification Fault Alarm High A033 Tubes not full High A034 Undefined High A035 Undefined High A036 Undefined High A037 Undefined High A038 Undefined High A039 Undefined High A100 Primary mA Output Saturated Low A101 Primary mA Output Fixed Low A102 Drive Over-Range Low A103 Data Loss Possible Low A104 Calibration-In-Progress Low A105 Slug Flow Low A106 Burst Mode Enabled Low A107 Power Reset Occurred Low A108 Event #1 Triggered Low A109 Event #2 Triggered Low A110 Frequency Output Saturated Low A111 Frequency Output Fixed Low A112 Series 1000/2000 Software Upgrade Recommended Low A113 Secondary mA Output Saturated (IS Output or Cfg I/O) Low A114 Secondary mA Output Fixed (IS Output or Cfg I/O) Low A115 External Input Error Low A116 API Temperature Out-of-Limits Low A117 API Density Out-of-Limits Low A118 Discrete Output 1 Fixed (Cfg I/O) Low A119 Discrete Output 2 Fixed (Cfg I/O) Low A120 ED: Unable to fit curve data Low A121 ED: Extrapolation alarm Low A122 Discrete Output 3 Fixed (3500) Low A123 Discrete Output 4 Fixed (3500) Low A124 Frequency Input Saturated (3500) Low A125 Batcher: Timeout (3500) Low A126 Batcher: Overrun (3500) Low A127 Batcher: Start without reset (3500) Low A128 Batcher: Start not OK (3500) Low A129 Undefined Low A130 Undefined Low A131 Meter Verification Info Alarm Low A132 Simulation Mode is Active Low