Professional Documents
Culture Documents
Grade Book
Grade Book
Grade Book
% Max % Max % Max % Max % Max % Max % Max % Max KSI MPA KSI MPA % Min %Min
ASTM A216 Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
WCB 0.30 1.00 0.60 0.35 0.035 (0.50) (0.50) (0.20) 70-95 485-655 36 250 22 35
WCC 0.25 1.20 0.60 0.35 0.035 (0.50) (0.50) (0.20) 70-95 485-655 40 275 22 35
ASTM A217 Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
WC6 0.05-0.20 0.50-0.80 0.60 0.035 0.035 1.00-1.50 (0.50) 0.45-0.65 70-95 485-655 40 275 20 35
WC9 0.05-0.18 0.40-0.70 0.60 0.035 0.035 2.00-2.75 (0.50) 0.90-1.20 70-95 485-655 40 275 20 35
WC11 0.15-0.21 0.50-0.80 0.30-0.60 0.015 0.020 1.00-1.50 (0.50) 0.45-0.65 80-105 550-725 50 345 18 45
C5 0.20 0.40-0.70 0.75 0.045 0.040 4.00-6.50 (0.50) 0.45-0.65 90-115 620-795 60 415 18 35
C12 0.20 0.35-0.65 1.00 0.035 0.035 8.00-10.0 (0.50) 0.90-1.20 90-115 620-795 60 415 18 35
CA15 0.15 1.00 1.50 0.025 0.040 11.5-14.00 1.00 0.50 90-115 620-795 65 450 18 30
ASTM A352 Steel Castings, Ferritic and Martensitic, for PressureContaining Parts, Suitable for Low-Temperature Service
LCB 0.30 1.00 0.60 0.045 0.040 (0.50) (0.50) (0.20) 65.0-90.0 450-620 35 240 24 35
Impact Requirement : Charpy V-Notch Energy Value 10ft-lbf or 14J for Single Specimen at Testing Temperature -50F or -46C
LCC 0.25 1.20 0.60 0.045 0.040 (0.50) (0.50) (0.20) 70.0-95.0 485-655 40 275 22 35
Impact Requirement : Charpy V-Notch Energy Value 12ft-lbf or 16J for Single Specimen at Testing Temperature -50F or -46C
CA6NM 0.06 1.00 1.00 0.03 0.04 11.5-14.0 3.5-4.5 0.40-1.0 110-135 760-930 80 550 15 35
Impact Requirement : Charpy V-Notch Energy Value 15ft-lbf or 20J for Single Specimen at Testing Temperature -100F or -73C
ASTM A995 Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
1B 0.04 1.00 1.00 0.040 0.040 24.5-26.5 4.7-6.0 1.70-2.30 100 690 70 485 16
[ 25Cr-5Ni-Mo-Cu-N ] [ CD4MCuN ] Cu 2.7-3.3 N 0.10-0.25
Heat to 1900°F [1040°C] minimum, hold for sufficient time to heat casting uniformly to temperature, quench in water or rapid cool by other means
2A 0.080 1.00 1.50 0.040 0.040 22.5-25.5 8.0-11.0 3.0-4.5
[ 25Cr-10Ni-Mo-N ] [ CE8MN ] N 0.10-0.30
Heat to 2050°F [1120°C] minimum, hold for sufficient time to heat casting uniformly to temperature, quench in water or rapid cool by other means.
3A 0.06 1.00 1.00 0.40 0.40 24.0-27.0 4.0-6.0 1.75-2.50
[ 25Cr-10Ni-Mo-N ] [ CD6MN ] N 0.10-0.30
Heat to 1950°F [1070°C] minimum, hold for sufficient time to heat casting uniformly to temperature, quench in water or rapid cool by other means.
4A 0.030 1.50 1.00 0.040 0.020 21.0-23.5 4.5-6.5 2.5-3.5
[ 22Cr-5Ni-Mo-N ] [ CD3MN ] Cu 1.00 Max N 0.10-0.30 Heat to 2050°F [1120°C] minimum for sufficient time to heat casting uniformly to temp
and water quench, or the casting may be furnace cooled to 1850°F [1010°C] minimum, hold for 15 min minimum and then water quench or rapid cool by other means.
5A 0.030 1.50 1.00 0.40 0.40 24.0-26.0 6.0-8.0 4.0-5.0
[ 25Cr-Ni-Mo-N ] [ CE3MN ] N 0.10-0.30
Heat to 2050°F [1120°C] minimum, hold for sufficient time to heat casting to temp, furnace cool to 1910°F [1045°C] minimum, quench in water or rapid cool by other means
6A 0.030 1.00 1.00 0.030 0.025 24.0-26.0 6.5-8.5 3.0-4.0
[ 25Cr-Ni-Mo-N ] [ CD3MWCuN ] Cu 0.50-1.00 N 0.20-0.30 W 0.50-1.00
Heat to 2010°F [1100°C] minimum, hold for sufficient time to heat casting uniformly to temperature, quench in water or cool rapidly by other means.
Quotation
GERMAN TECHNO CAST Quote To: M/s
Plot No 192/193/194, Pushpam Ind Estate, Address:
Phase-I, GIDC Vatva, Ahmedabad-382445
GST No 24 AAMFG 0579Q 1ZR GST No
germantechnocast@gmail.com Email:
Nayan Patel M 999899 4712 Kind Attention:
Discount Offer
Regarding Payment Condition Regarding Quantity Condition
Quotation Prepared By
Quote No Quote Date Party Name