Professional Documents
Culture Documents
Theory of Elasticity and Plasticity. (CVL 622) M.Tech. CE Term-2 (2017-18)
Theory of Elasticity and Plasticity. (CVL 622) M.Tech. CE Term-2 (2017-18)
Theory of Elasticity and Plasticity. (CVL 622) M.Tech. CE Term-2 (2017-18)
SECTION-C
Paper ID: 15021 Roll Number
(ii) State St. Venant Theory and also draw the idealized stress strain
curve.
(iii) What is known as Semi Infinite Beam and Elastic plastic with
strain hardening?
1 [Contd…….
4
(v) Mention examples of plane stress or strain problems.
SECTION-B
(vi) What is Poisson’s equation for torsion of on circular bars?
(vii) The state of stresses at a point with respect to the xyz system is: Q.2 Answer ANY FOUR questions of the following: (4 10 = 40)
3 2 −2 x2 y2
(i) An elliptical cross-section having the equation + = 1 is
2 0 −1 4 9
subjected to a torsional moment of 60 units. Analyze the shaft.
−2 −1 2 kN/m2
(ii) Derive differential equation for the elastic line of a beam resting
Determine the stress tensor relative to the x’y’z’ on an elastic foundation.
coordinate system obtained by a rotation through 30o about the
(iii) The state of stress at a particular point relative to the xyz
z-axis.
coordinate system is given by the stress matrix.
(viii) Express the stresses acting in a tapering beam and infinite
wedge. 15 10 −10
(x) Derive the expression for deflection of a cantilever beam by Determine the normal stress and the magnitude and direction of
Rayleigh’s Method. the shear stress and normal stress.
(xi) Define inverse and semi inverse method. (iv) Verify whether the following stress function is compatible and
(xii) What is the usage of Theory of plasticity? Relate with live also sketch the stress variation:
example. −F 2
= xy (3d − 2 y )
d3
(xiii) Define load factor and shape factor.
(v) Discuss in detail the various theories of failure normally
(xiv) What are the residual stresses in torsion? adopted to find the yield criteria.
(xv) State St. Venant theory for torsion. (vi) Derive the expression of Generalized Hooke’s law for plane
stress condition.
2 [Contd…….
3 [Contd…….