The document discusses design codes and standards for a feasibility report on the construction of bridges and approaches on the Tamu-Kyigone-Kalewa road in Myanmar. It lists several Indian Road Congress codes covering general design features, loads and stresses, concrete bridges, composite and steel bridges, foundations and substructures, and bearings. It also lists Myanmar specifications and notifications regarding bridge widths on national highways and expansion joints.
The document discusses design codes and standards for a feasibility report on the construction of bridges and approaches on the Tamu-Kyigone-Kalewa road in Myanmar. It lists several Indian Road Congress codes covering general design features, loads and stresses, concrete bridges, composite and steel bridges, foundations and substructures, and bearings. It also lists Myanmar specifications and notifications regarding bridge widths on national highways and expansion joints.
The document discusses design codes and standards for a feasibility report on the construction of bridges and approaches on the Tamu-Kyigone-Kalewa road in Myanmar. It lists several Indian Road Congress codes covering general design features, loads and stresses, concrete bridges, composite and steel bridges, foundations and substructures, and bearings. It also lists Myanmar specifications and notifications regarding bridge widths on national highways and expansion joints.
KD5: Final Feasibility Consultancy Services for Preparation of Feasibility Report for Construction of Bridges including
Report including Schedules Approaches on Tamu – Kyigone – Kalewa Road Section from km 0.00 to km 149.70 in Myanmar
5.3 DESIGN CODES AND STANDARDS
Design of all proposed structures is in accordance with the provisions of the following IRC Codes: IRC: 5-1998 - Section I- General Features of Design (Seventh Revision) IRC: 6-2014 - Section II- Loads and Stresses (Revised Edition) IRC: 112-2011 - Code of Practice for Concrete Road Bridges IRC: 22-2008 - Section IV- Composite construction for Road Bridges (Second Revision) IRC: 24-2001 - Section V- Steel Road Bridges (Second Revision) IRC: 78-2014 - Section VII- Foundations and Substructure (Revised Edition) IRC:83 (Part I)- - Section IX (Part I), Metallic Bearings 1999 IRC:83 (Part II)- - Section IX (Part II), Elastomeric Bearings 1999 IRC:83 (Part - Section IX (Part III), POT, POT cum PTFE, PIN and III)-2002 Metallic Guide Bearings IRC: 87-1984 - Guidelines for the Design and Erection of False work for Road Bridges IRC: 89-1997 - Guidelines for Design and Construction of River Training and Control Works for Road Bridges (First Revision) IRC:SP:64-2005 Guidelines for the Analysis and Design of Cast-in-Place Voided Slab Superstructure IRC:SP:66-2005 Guidelines for Design of Continuous Bridges IRC:SP:69-2005 Guidelines & Specifications for Expansion Joints IRC:SP:70-2005 Guidelines for the Use of High Performance Concrete in Bridges IRC:SP:73-2007 Manual of Standards and Specifications for Two Lanning of State Highways on BOT basis MORTH Specifications for Road and Bridges Works, 2013 (Fifth Revision) MORTH notification on “Width of bridges on 2 lane National Highways (with and without Footpath) letter No. RW/NH/33044/2/88-S&R(B) dated 24th March 2009 MORTH notification on “Width of bridges on 2 lane National Highways on Hills (with and without Footpath) letter No. RW/NH/33044/2/88-S&R(B) dated 21st Oct 2009 MORTH Circular No. RW/NH-34059/1/96-S&R dated 30.11.2000 regarding expansion joints.