Professional Documents
Culture Documents
Cables de Poder de Cisco
Cables de Poder de Cisco
Cables de Poder de Cisco
This appendix provides cabling and port specifications for control devices and power connections and
includes the following sections:
• KVM Cable, page B-1
• Supported Power Cords and Plugs, page B-2
KVM Cable
The KVM cable provides a connection into the server, providing a DB9 serial connector, a VGA
connector for a monitor, and dual USB ports for a keyboard and mouse. With this cable, you can create
a direct connection to the operating system and the BIOS running on the server.
This server supports the following Cisco components and part numbers.
Note Only the approved power cords or jumper power cords provided with the server are supported.
Table B-1 lists the power cords for the server power supplies
2500 mm
186571
Figure B-3 CAB-9K10A-AU
Connector:
Plug: EL 701C
EL 206 (IEC 60320/C15)
186581
A.S. 3112-2000)
Connector:
EL 701
186573
(IEC60320/C13)
186576
Figure B-6 CAB-250V-10A-ID
OVE
Connector:
EL 701
187490
EL-212
16A
250V
Connector:
Plug: EL 701B
EL 212 (IEC60320/C13)
186574
(SI-32)
186575
Figure B-9 CAB-9K10A-SW
Connector:
Plug: EL 701C
EL 210 (EN 60320/C15)
186580
(BS 1363A) 13 AMP fuse
Connector:
Plug:
EL 701
EL312MoldedTwistlock
(IEC60320/C13)
186568
(NEMA L6-20)
Connector:
IEC60320/C13
186570
Plug: Connector:
NEMA 5-15P IEC60320/C15
192260
Figure B-14 CAB-C13-C14-JMPR, Jumper Power Cord
Plug: Connector:
186569
SS10A HS10S