Professional Documents
Culture Documents
Fault Code 132: Accelerator Pedal Position Sensor Circuit
Fault Code 132: Accelerator Pedal Position Sensor Circuit
Fault Code 132: Accelerator Pedal Position Sensor Circuit
Fault Code: 132 Accelerator Pedal Position Sensor Severe derate in power output of the engine.
PID(P), SID(S): P091 Circuit - shorted low. Low voltage Limp home power only.
SPN: 091 detected at accelerator pedal
FMI: 4/4 position signal circuit.
Lamp: Red
SRT:
Circuit Description:
The accelerator pedal position sensor is attached to the accelerator pedal. The accelerator pedal position sensor sends
a signal to the electronic control module (ECM) when the accelerator pedal is depressed and released. The accelerator
pedal position circuit contains three wires: Accelerator Pedal Position Supply, Accelerator Pedal Position Return, and
Accelerator Pedal Position Signal.
Component Location:
The accelerator pedal position sensor is mounted to the accelerator pedal assembly.
Shop Talk:
If troubleshooting an intermittent accelerator problem:
The accelerator pedal position sensor signal voltage can be monitored with the INSITE™ electronic service tool, while
flexing the harness to locate the intermittent connection. Intermittent connections will show up as abrupt changes in
signal voltage displayed by INSITE™.
Possible causes of this fault include:
• Accelerator pedal position signal shorted to engine ground or return wires in the OEM harness or sensor.
• Failed accelerator pedal position sensor.
© 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
All Rights Reserved. Last Modified: 01-Sep-2010
File: 70-fc132 Page 2 of 2
© 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
All Rights Reserved. Last Modified: 01-Sep-2010