Professional Documents
Culture Documents
ProductGuideFullSet2014 7TH PDF
ProductGuideFullSet2014 7TH PDF
edition
PRODUCT GUIDE
I R O N & S T E E L , B U I L D I N G M AT E R I A L S D I V I S I O N
• Penang • Ipoh • Kuala Lumpur • Klang • Nilai • Melaka • Johor Bahru • Alor Setar •
• Kota Bharu • Kuala Terengganu • Kuantan • Kuching • Kota Kinabalu • Tawau • Bintulu •
CHUAN HUAT RESOURCES BERHAD
(IRON & STEEL, BUILDING MATERIALS DIVISION)
Branches throughout MALAYSIA
ALOR SETAR
KOTA BHARU
KUALA TERENGGANU
BUTTERWORTH
IPOH
KUANTAN
KUALA LUMPUR
KLANG
MELAKA
JOHOR BAHRU
BINTULU
TAWAU
KUCHING
Disclaimer:
The specifications published in this Product Guide have been extracted from various technical publications and have not been technically
verified by the Publisher. As such, this Product Guide should only be used as a GUIDE to the Publisher’s product and NOT to be used as
a reference Manual to the “Referred Products” in general.
For actual specifications and up-to-date information concerning the “Referred Products”, please contact the manufacturer or their agents.
The Publisher and Printer of this Product Guide assumes no responsibility or liabilities whatsoever, arising from the inaccuracies of the
“specifications” so published.
Malaysia
Johor Darul Ta’zim Pahang Darul Makmur Terengganu Darul Iman Kelantan Darul Naim
Sabah Sarawak
Wilayah Persekutuan
HEAD OFFICE
SALESRECEPTION
COORDINATORS WAREHOUSE A
WAREHOUSE B LOGISTICS
CHRB
CHHH CHS
CHR CHRS
CHSAMA BMI
• Chuan Huat Resources Berhad CHRB • CHRB Corporation Sdn. Bhd. CHC
• Chuan Huat Hardware Holdings Sdn. Bhd. CHHH • CHRB Utara Sdn. Bhd. CHRBU
• Chuan Huat Steel Sdn. Bhd. CHS • CHRB Timuran Sdn. Bhd. CHRBT
(formerly known as Chuan Huat Hardware (Sdn.) Berhad)
• Bars & Mesh Industries Sdn. Bhd. BMI • CHRB Selatan Sdn. Bhd. CHRBS
• CH Rebar Sdn. Bhd. CHR • CHRB Building Materials Sdn. Bhd. CHBM
• Chuan Huat Industrial Marketing Sdn. Bhd. CHIM • CHRB Bahan Binaan Sdn. Bhd. CHBB
• CH Reinforcing Steel (M) Sdn. Bhd. CHRS • KEYline Consulting Sdn. Bhd. KEYLINE
• Chuan Huat Metal Sdn. Bhd. CHM • Pemasaran Esyfence Sdn. Bhd. PESB
• CH Samawira Mesh Sdn. Bhd. CHSAMA • CHRB Trading Sdn. Bhd. CHT
COMPANY DETAILS
CHUAN HUAT STEEL SDN. BHD. (30592-U)
(formerly known as Chuan Huat Hardware (Sdn.) Berhad)
Sales Office Wisma Lim Kim Chuan, Lot 50A, Jalan 1/89B, 3½ Miles,
Off Jalan Sungei Besi, 57100 Kuala Lumpur, Malaysia.
E-mail enquiries@chuanhuat.com.my
Products & Services Wholesales stockist supplying all types of structural and mild steel products;
Importer and Exporter of all kinds of construction materials.
E-mail chim@chuanhuat.com.my
E-mail chimklg@chuanhuat.com.my
Products & Services Specialised in supplies of Steel Reinforcement Bars, Cement and
all kinds of building and construction materials.
Sole Distributor of
• G-LOC
• TERRAM Geosynthethic Products
• FLEXI DRAIN Prefabricated Vertical Drain
Products
• Steel Fabric for Reinforcement, High Quality Hard Drawn Wires,
Commercial Quality Drawn Bars, Special Cut to Length High Tensile /
Mild Steel Round Bars.
• Cut & Bend to size Mild Steel Round Bar and High Tensile Deformed Bar.
• Supply & install of Steel Roof Trusses.
COMPANY DETAILS
CHRB UTARA SDN. BHD. (291943-T)
Regional Office Penang
Plot 204, Lorong Perindustrian Bukit Minyak 11, Bukit Minyak Industrial Park,
14100 Bukit Mertajam, Pulau Pinang, Malaysia.
E-mail chrbutara@chuanhuat.com.my
E-mail chrbiph@chuanhuat.com.my
E-mail chrbaor@chuanhuat.com.my
Product & Services Supplier of structural steel, cement and all kinds of building construction
materials within the Northern region.
COMPANY DETAILS
CHRB SELATAN SDN. BHD. (48743-P)
E-mail chrbselatan@chuanhuat.com.my
E-mail chrbjhb@chuanhuat.com.my
Products & Services Supplier of structural steel, cement and all kinds of building construction
materials within the Southern Region.
Sales Office Wisma Lim Kim Chuan, Lot 50A, Jalan 1/89B, 3½ Miles,
Off Jalan Sungei Besi, 57100 Kuala Lumpur, Malaysia.
E-mail enquiries@chuanhuat.com.my
Products & Services Specialised in supplies of Steel Reinforcement Bars, Cement and
all kinds of building and construction materials.
E-mail chrbtim@chuanhuat.com.my
E-mail chrbktn@chuanhuat.com.my
E-mail chrbkbr@chuanhuat.com.my
Product & Services Supplier of structural steel, cement and all kinds of building and
construction materials within the East Coast.
E-mail chrbbm@gmail.com
Product & Services Supplier of structural steel, cement and all kinds of building and
construction materials within Sabah and Labuan.
COMPANY DETAILS
CHUAN HUAT METAL SDN. BHD. (435130-D)
Regional Office KUCHING
Wisma Hii Yii Ngiik, 2nd Floor, Lots 7572-7574, Jalan Kwong Lee Bank,
93450, Kuching, Sarawak, Malaysia.
E-mail chmetal.btu@chuanhuat.com.my
Product & Services Supplier of structural steel, steel bars, mesh, cement, roofing materials,
gratings, gabions, ceramic tiles, VCP pipes and building materials within
Sarawak.
E-mail enquiries@chuanhuat.com.my
Product & Services Supplier of structural steel, cement and all kinds of building and construction
materials within Sabah and Labuan.
COMPANY DETAILS
CH REBAR SDN. BHD. (485873-T)
E-mail chrebar@chuanhuat.com.my
Products & Services Cut & Bend to size Mild Steel Round Bar and High Tensile Deformed Bar.
Sales Office Wisma Lim Kim Chuan, Lot 50A, Jalan 1/89B, 3½ Miles,
Off Jalan Sungei Besi, 57100 Kuala Lumpur, Malaysia.
E-mail bmi@chuanhuat.com.my
Products & Services Steel Fabric for reinforcement (welded mesh), high quality hard drawn wires
and commercial quality steel bars.
Sales Office Wisma Lim Kim Chuan, Lot 50A, Jalan 1/89B, 3½ Miles,
Off Jalan Sungei Besi, 57100 Kuala Lumpur, Malaysia.
E-mail esyfence@chuanhuat.com.my
E-mail enquiries@chuanhuat.com.my
Products & Services Manufacturer of Steel Fabric for reinforcement (welded mesh), welded security
fence, high quality hard drawn wires, commercial quality drawn bars, special
cut to length high tensile / mild steel round bars.
Sales Office Wisma Pineapple, Lot 135, Jalan 1/89B, 3½ Miles, Off Jalan Sungei Besi,
57100 Kuala Lumpur, Malaysia.
E-mail info@keyline.com.my
Products & Services Manufacturer, distributor and specialist supplier of complete architectural
door hardware and security solutions including mechanical, electromechanical,
special high security locking system, hotel electronic card systems, maximum
institutional security detention locking system, safety protection padding,
safety fire and panic exit devices, high quality premium locking system for
buildings.
Sole agents and exclusive distributor for ECO Door System Hardware
(Germany), RR BRINK (USA) Detention Locking System, Onity (Tesa)
Electronic Hotel Locking System, Bestko (HK) Premium Glass Door Hardware,
Hager (USA) High Quality Hinges, Lorient (UK) door seals and gaskets,
Helaform (Finland) Sliding Door Gears system, SDC (USA) Electromechanical
Locking system, Gold Medal (USA) Safety Padding, Simonsvoss Access
Control and Electronic Cylinders including KEYLINE range of door hardware
and accessories.
E-mail sgmmesh@gmail.com
Products & Services Manufacturer of Steel Fabric for reinforcement (welded mesh), welded security
fence, high quality hard drawn wires, commercial quality drawn bars, special
cut to length high tensile / mild steel round bars.
PRODUCTS
Cut & Bend Steel Bars Wire Mesh Hard Drawn Wires Steel Bars
PRIMA Board ESYFENCE Clay & Concrete Pavers Vitrified Clay Pipes
-Perimeter Fencing & Fittings
API Pipes 30 - 43
Special Sizes 80 - 81
Specification
An specified in
S275JR 410-560 (N3) 275 min - 3.0mm & over, up to 4.0mm 22 min 0.24 - 1.60 0.055 0.055
BS EN 10025
- Gauge Length -
22-min 400-550 250 min 23 min 0.25 0.40 - 0.040 0.050 -
Lo=50mm
Up to 1.6mm t (N1)
Galvanised Steel
SGCC 270 min 205 min - 1.6mm & over, up to 3.0mm - - - - - - 180° t (N1)
JIS G 3302
Sheets
SPCC 270 min - No. 5 0.12 - 0.50 0.040 0.045 180° Flat on
1.6mm & over, up to 2.5mm 38 min itself
2.5mm & over 39 min
1
LIST OF STANDARD SPECIFICATIONS
2
LIST OF STANDARD SPECIFICATIONS (Continued)
BS 7191
275D 275 265 - 430-580 22 - - 40 - -
275E 275 265 265 430-580 22 - - - 40 -
275EZ 275 265 265 430-580 22 - - - 40 -
355D 355 345 - 490-640 20 - - 50 - -
355E 355 345 - 490-640 20 - - - 50 -
355EM 355 345 340 460-620 20 - - - 50 -
355EMZ 355 345 340 460-620 20 - - - 50 -
450EM 450 415 - 550-700 19 - - - 60 -
450EMZ 450 415 - 550-700 19 - - - 60 -
HULL STRUCTURES
3
LIST OF STANDARD SPECIFICATIONS (Continued)
4
LIST OF STANDARD SPECIFICATIONS (Continued)
4)
For plates thicker than 60mm, see EN 10028-2:1992
5)
For plates thicker than 50mm, see EN 10028-3:1992
5)*
For plates thicker than 70mm, see EN 10028-3-1992
6)
For t30mm
6)**
For 30<t50mm
7)
Maximum thickness 63mm
8)
For t50mm
8)*
For 50<t100mm
8)**
For 100<t150mm
8)***
For t100mm, For 100<t<150mm, see EN 10028-6
5
STEEL PLATES
Plate Weight
Width 1219 1219 1524 1524 1524 1524 1829 1829 2133 2133 2438 2438 2743 2743
x x x x x x x x x x x x x x x
Length 2438 6096 3048 6096 9144 12192 6096 12192 6096 12192 6096 12192 6096 12192
(mm)
Width
x 4'x8' 4'x20' 5'x10' 5'x20' 5’x30’ 5'x40' 6'x20' 6'x40' 7'x20' 7'x40' 8'x20' 8'x40' 9'x20' 9'x40'
Length 48x96 48x240 60x120 60x240 60x360 60x480 72x240 72x480 84x240 84x480 96x240 96x480 108x240 108x480
(ft)
(inch)
Thickness
KG PC
(mm)
8 187 467 292 583 875 1167 700 1400 817 1634 933 1867 1051 2100
9 210 525 328 656 985 1313 788 1575 919 1837 1050 2100 1182 2363
10 233 583 365 729 1094 1459 875 1750 1021 2042 1167 2333 1313 2625
12 280 700 438 875 1313 1750 1050 2100 1225 2450 1400 2800 1575 3151
12.7 296 741 463 926 1389 1852 1112 2223 1296 2593 1482 2363 1667 3334
14 327 817 510 1021 1532 2042 1225 2450 1429 2858 1634 3267 1838 3675
15 350 875 547 1094 1641 2187 1313 2626 1532 3062 1750 3500 1969 3938
16 373 933 584 1167 1750 2334 1400 2801 1634 3266 1867 3734 2100 4201
18 420 1050 656 1313 1969 2625 1575 3151 1837 3675 2100 4200 2363 4725
19 443 1108 693 1386 2078 2771 1663 3326 1939 3879 2217 4433 2494 4988
20 467 1167 729 1459 2188 2917 1751 3501 2041 4083 2333 4667 2625 5250
22 513 1283 802 1604 2406 3209 1926 3851 2246 4491 5567 5133 2888 5776
24 560 1400 875 1750 2625 3501 2101 4201 2450 4900 2800 5600 3150 6301
25 583 1458 912 1823 2735 3646 2188 4376 2552 5104 2917 5833 3282 6563
25.4 593 1482 926 1852 2778 3705 2223 4446 2593 5185 2963 5927 3334 6668
26 607 1517 948 1896 2884 3792 2276 4551 2654 5308 3033 6067 3413 6826
28 653 1633 1021 2042 3063 4084 2450 4901 2858 5716 3267 6534 3676 7351
30 700 1750 1094 2188 3282 4376 2626 5251 3062 6124 3500 7000 3938 7876
32 747 1867 1167 2334 3501 4668 2801 5602 3266 6533 3733 7467 4200 8401
36 840 2100 1313 2625 3938 5251 3151 6302 3675 7349 4200 8400 4725 9450
38 887 2217 1368 2771 4157 5542 3326 6652 3879 7757 4433 8867 4988 9976
40 933 2333 1458 2917 4376 5834 3500 7001 4083 8186 4667 9334 5250 10500
45 1050 2625 1641 3282 4923 6564 3938 7877 4593 9186 5250 10500 5907 11814
50 1167 2917 1823 3646 5470 7293 4376 8752 5104 10207 5833 11666 6563 13126
55 1283 3209 2006 4011 6017 8022 4814 9628 5614 11228 6417 12833 7219 14439
60 1400 3500 2188 4376 6564 8752 5251 10503 6124 12249 7000 14000 7876 15751
65 1516 3792 2370 4740 7111 9481 5689 11378 6635 13269 7583 15167 8532 17064
70 1633 4083 2553 5105 7658 10210 6127 12253 7145 14290 8167 16333 9188 18377
* Calculated Considering Specific-Gravity of Steel at 7.85kg/mm2 and Dimension in mm
6
CHEQUERED PLATE (FLOOR PLATES OR TEAR DROP PLATES)
BS EN 10025 S275 JR JIS G 3101 - SS330
ASTM A 36 JIS G 3101 - SS400
4’ x 8’ 5’ x 10’ 6’ x 20’
1219mm x 2438mm 1524mm x 3048mm 1829mm x 6096mm
Calculated Weight
mm kg/pc lb/pc pcs/mt kg/pc lb/pc pcs/mt kg/pc lb/pc pcs/mt
3.0 75.069 165.497 13.3 117.336 258.679 8.5 281.623 620.886 3.6
4.5 110.063 242.645 9.1 172.033 379.264 5.8 412.909 910.299 2.4
6.0 145.058 319.795 6.9 226.730 499.849 4.4 544.195 1199.732 1.8
7.5 180.052 396.943 5.6 281.426 620.432 3.6 675.482 1489.168 1.5
8.0 191.717 422.659 5.2 299.659 660.628 3.3 719.244 1585.646 1.4
9.0 215.046 474.090 4.7 336.123 741.017 3.0 806.768 1778.601 1.2
10.0 238.376 525.524 4.2 372.587 821.405 2.7 894.292 1971.556 1.1
11.0 261.705 576.955 3.8 409.052 901.796 2.4 981.817 2164.514 1.0
12.0 285.035 628.388 3.5 445.516 982.185 2.2 1069.341 2357.469 0.9
13.0 308.365 679.821 3.2 481.981 1062.575 2.1 1156.876 2550.45 0.9
14.0 331.694 731.253 3.0 518.445 1142.965 1.9 1244.401 2743.406 0.8
15.0 355.024 782.686 2.8 554.910 1223.354 1.8 1331.925 2936.362 0.8
16.0 378.353 834.118 2.6 591.374 1303.744 1.7 1419.449 3129.318 0.7
*Other sizes & lengths not stipulated in the table above may be made available upon request
7
COLD-ROLLED SHEETS
JIS G 3141 - SPCC
4’ x 8’
1219mm x 2438mm
Calculated Weight
mm kg/pc lb/pc pcs/mt
0.30 6.999 15.430 142.9
0.35 8.165 18.001 122.5
0.36 8.399 18.516 119.1
0.40 9.332 20.573 107.2
0.45 10.498 23.145 95.3
0.50 11.665 25.716 85.7
0.55 12.831 28.288 77.9
0.60 13.998 30.859 71.4
0.65 15.164 33.431 65.9
0.70 16.331 36.003 61.2
0.80 18.664 41.146 53.6
0.85 19.830 43.718 50.4
0.90 20.997 46.289 47.6
1.00 23.330 51.432 42.9
1.10 25.663 56.576 39.0
1.20 27.996 61.719 35.7
1.40 32.661 72.005 30.6
1.45 33.828 74.577 29.6
1.50 34.994 77.149 28.6
1.55 36.161 79.722 27.7
1.60 37.327 82.292 26.8
1.80 41.993 92.578 23.8
1.90 44.326 97.722 22.6
2.00 46.659 102.865 21.4
2.20 51.325 113.151 19.5
2.30 53.658 118.295 18.6
2.50 58.324 128.581 17.1
2.60 60.657 133.724 16.5
2.80 65.323 144.011 15.3
2.90 67.656 149.154 14.8
3.00 69.989 154.297 14.3
*Other sizes not stipulated in the table above may be available upon request
8
GALVANIZED STEEL SHEETS
JIS G 3302 - SGCC
JIS G 3302 - SGHC
4’ x 8’
1219mm x 2438mm
Z 18 Z 22/ Z 25 Z 27
Calculated Weight
mm kg/pc lb/pc pcs/mt kg/pc lb/pc pcs/mt kg/pc lb/pc pcs/mt
0.30 7.724 17.028 129.5 7.905 17.428 126.5 8.131 17.926 123.0
0.35 8.891 19.600 112.5 9.072 20.000 110.2 9.298 20.498 107.6
0.36 9.124 20.114 109.6 9.305 20.514 107.5 9.531 21.012 104.9
0.40 10.057 22.172 99.4 10.238 22.571 97.7 10.464 23.069 95.6
0.45 11.233 24.743 89.1 11.405 25.143 87.7 11.631 25.641 86.0
0.50 12.390 27.315 80.7 12.571 27.715 79.5 12.797 28.212 78.1
0.55 13.556 20.886 73.8 13.738 30.286 72.8 13.964 30.784 71.6
0.60 14.723 32.458 67.9 14.904 32.858 67.1 15.130 33.356 66.1
0.65 15.889 35.030 62.9 16.071 35.429 62.2 16.297 35.927 61.4
0.70 17.056 37.601 58.6 17.237 38.001 58.0 17.463 38.499 57.3
0.75 18.222 40.173 54.9 18.404 40.573 54.3 18.629 41.071 53.7
0.80 19.389 42.745 51.6 19.570 43.144 51.1 19.796 43.642 50.0
0.85 20.555 45.316 48.6 20.737 45.716 48.2 20.962 46.214 47.7
0.90 21.722 47.888 46.0 21.903 48.287 45.7 22.129 48.785 45.2
1.00 24.055 53.031 41.6 24.236 53.431 41.3 24.462 53.929 40.9
1.10 26.388 58.174 37.9 26.569 58.574 37.6 26.795 59.072 37.3
1.20 28.721 63.318 34.8 28.902 63.717 34.6 29.128 64.215 34.3
1.40 33.387 73.604 30.0 33.568 74.004 29.8 33.794 74.502 29.6
1.45 34.553 76.176 28.9 34.734 76.575 28.8 34.960 77.073 28.6
1.50 35.720 78.747 28.0 35.901 79.147 27.9 36.127 79.645 27.7
1.55 36.886 81.319 27.1 37.067 81.719 27.0 37.293 82.217 26.8
1.60 38.052 83.891 26.3 38.234 84.290 25.2 38.460 84.788 26.0
1.80 42.718 94.177 23.4 42.900 94.577 23.3 43.126 95.075 23.2
1.90 45.051 99.320 22.2 45.233 99.720 22.1 45.459 100.218 22.0
2.00 47.384 104.463 21.1 47.566 104.863 21.0 47.791 100.361 22.0
2.20 52.050 114.750 19.2 52.232 115.150 19.1 52.457 115.648 19.1
2.30 54.383 119.893 18.4 54.564 120.293 18.3 54.790 120.791 18.3
2.50 49.049 130.180 16.9 59.230 130.579 16.9 49.456 131.077 16.8
2.60 61.382 135.323 16.3 61.563 135.723 16.2 61.789 136.221 16.2
2.80 66.048 145.609 15.1 66.229 145.009 15.1 66.455 146.507 15.0
2.90 68.381 150.753 14.6 68.562 151.152 14.6 68.788 151.650 14.5
3.00 70.714 155.896 14.1 70.895 156.296 14.1 71.121 156.794 14.1
*Other sizes not stipulated in the table above may be made available upon request
9
TECHNICAL SPECIFICATION REFERENCES
- Lipped Channels & Plain Channels
Tolerances - JIS G 3350 & SS 104
1.6mm ± 0.22mm
2.0mm, 2.3mm ± 0.25mm
2.8mm ± 0.28mm
3.0mm, 3.2mm ± 0.30mm
4.0mm, 4.5mm ± 0.45mm
6.0mm ± 0.60mm
Out of Roundness
Concavity / Convexity
Twist
Straightness 2mm/m
10
LIPPED CHANNELS
Y
- Available In Hot Rolled & Galvanized Material A
C
JIS G 3350 SSC 400 90° 90°
t
SS 104 X
S.C
ix
ly
X
H I
I
90° 90°
C
A
Cy
Sx
Y
11
LIPPED CHANNELS (Continued)
Y
- Available In Hot Rolled & Galvanized Material A
C
JIS G 3350 SSC 400 90° 90°
t
SS 104 H X
S.C
ix
ly
X
I
I
90° 90°
C
A
Cy
Sx
Y
12
PLAIN CHANNELS
Y
- Available In Hot Rolled & Galvanized Material A
SS 104 H X
S.C
ix
ly
X
I
90°
A
Cy
Sx
Y
13
HIGH TENSILE C - PURLINS
Specifications And Section Properties
300 x 100 250 x 75 200 x 75 175 x 75 175 x 65 150 x 65 125 x 50 100 x 50 75 x 45 75 x 35
Thickness 1.6mm 1.6mm 1.6mm 1.6mm 1.6mm 1.6mm 1.6mm 1.6mm 1.6mm
1.6mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm
2.0mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm 2.5mm
2.5mm
y
x
L
t
x x H
Centroid
y
L
B
y
Identification
ACP 125 20 50
C-purlin Nominal Thickness Flange
Height Width
Identification Web Flange Thickness Tip Size Area Weight x y lxx lyy Zxx Zyy Rxx Ryy
2 6 4 6 4 3 3 3 3
H(mm) B(mm) t(mm) L(mm) mm kg/m mm mm 10 mm 10 mm 10 mm 10 mm mm mm
ACP07516-35 75 35 1.6 16 267 2.20 13.2 37.5 0.231 0.050 6.160 2.294 29.395 13.636
ACP07520-35 75 35 2.0 16 331 2.76 13.2 37.5 0.283 0.060 7.547 2.752 29.244 13.482
ACP07516-45 75 45 1.6 16 299 2.46 17.5 37.5 0.274 0.090 6.373 3.262 30.262 17.323
ACP07520-45 75 45 2.0 16 371 3.08 17.5 37.5 0.337 0.011 8.987 0.400 30.111 17.170
ACP10016-50 100 50 1.6 16 355 2.80 17.6 50.0 0.572 0.128 11.440 3.951 40.160 19.000
ACP10020-50 100 50 2.0 16 441 3.45 17.6 50.0 0.706 0.156 14.120 4.815 40.003 18.824
ACP10025-50 100 50 2.5 16 548 4.40 17.6 50.0 0.868 0.190 17.360 5.864 39.810 18.631
ACP12516-50 125 50 1.6 16 394 3.10 15.9 62.5 0.960 0.138 15.360 4.047 49.314 18.693
ACP12520-50 125 50 2.0 16 491 3.82 15.9 62.5 1.187 0.169 18.992 4.956 29.153 18.534
ACP12525-50 125 50 2.5 16 610 4.89 15.9 62.5 14.62 0.205 23.392 6.012 48.951 18.337
ACP15016-65 150 65 1.6 16 483 3.85 20.1 75.0 1.737 0.275 23.160 6.125 59.958 23.872
ACP15020-65 150 65 2.0 16 601 4.73 20.1 75.0 2.149 0.338 28.635 7.528 59.794 23.712
ACP15025-65 150 65 2.5 16 748 5.89 20.2 75.0 2.654 0.413 35.387 9.219 59.590 23.513
ACP17516-65 175 65 1.6 16 523 4.15 18.6 87.5 2.480 0.289 28.343 6.228 68.866 23.508
ACP17520-65 175 65 2.0 16 651 5.10 18.7 87.5 3.073 0.355 35.120 7.667 68.697 23.346
ACP17525-65 175 65 2.5 16 810 6.35 18.7 87.5 3.799 0.434 43.417 9.374 68.495 23.145
ACP17516-75 175 75 1.6 16 555 4.41 22.4 87.5 2.720 0.409 31.086 7.776 70.018 27.164
ACP17520-75 175 75 2.0 16 691 5.42 22.4 87.5 3.372 0.504 38.537 9.582 69.851 27.002
ACP17525-75 175 75 2.5 16 860 6.75 22.4 87.5 4.171 0.618 47.669 11.749 69.643 26.801
ACP20016-75 200 75 1.6 16 595 4.76 20.9 100.0 3.702 0.427 37.020 7.893 78.885 26.785
ACP20020-75 200 75 2.0 16 741 5.90 21.0 100.0 4.592 0.525 45.920 9.722 78.714 26.622
ACP 20025-75 200 75 2.5 16 923 7.39 21.0 100.0 5.685 0.644 56.850 11.926 78.500 26.419
ACP25016-75 250 75 1.6 16 675 5.38 18.5 125.0 6.236 0.455 49.888 8.053 96.120 25.975
ACP25020-75 250 75 2.0 16 841 6.59 18.6 125.0 7.742 0.560 61.936 9.929 95.939 25.811
ACP20525-75 250 75 2.5 16 1048 8.35 18.6 125.0 9.596 0.687 76.768 12.181 95.713 25.607
ACP30016-100 300 100 1.6 16 841 6.64 24.9 150.0 11.526 0.998 76.840 13.289 117.074 34.445
ACP30020-100 300 100 2.0 16 1048 8.35 24.9 150.0 14.314 1.230 95.427 16.378 116.869 34.261
ACP30025-100 300 100 2.5 16 1305 10.26 24.9 150.0 17.746 1.511 118.307 20.147 116.613 34.032
14
HIGH TENSILE Z - PURLINS
Specifications And Section Properties
Lapping
Purlin
EQ EQ Bracket
Broad Flange
z z
Narrow Flange
Narrow Flange
Rafter
Purlin Brackets
Section View
y
2
L
1
t
x Q° x
D
1 D-Depth
F-Narrow Flange
L E-Broad Flange
L-Lipped
E t-Thickness
y
2
H(mm) d(mm) d/2(mm) d(mm) d/2(mm) d(mm) d/2(mm) d(mm) d/2(mm) d(mm) d/2(mm)
100 50 25 50 25 50 25 50 25 50 25
125 50 25 50,70 25, 35 50, 60 25, 30 50, 55, 60 25, 27.5 50 25
150 50, 80 25, 40 50, 70, 100 25, 35, 50 50, 60, 100 25, 30, 50 50, 55, 60 25, 27.5, 50 50 25
175 50, 80 25, 40 50, 70, 100 25,3 5, 50 50, 60, 100 25, 30, 50 50, 55, 60 25, 27.5, 50 50 25
200 50, 80 25, 40 50, 70, 100 25, 35, 50 50, 60, 100 25, 30, 50 50, 55, 60 25, 27.5, 50 50 25
250 50, 80 25, 40 50, 70, 100 25, 35, 50 50, 60, 100 25, 30, 50 50, 55, 60 25, 27.5, 50 50 25
300 50, 80 25, 40 50, 70, 100 25, 35, 50 50, 60, 100 25, 30, 50 50, 55, 60 25, 27.5, 50 50 25
H(mm) d(mm) d/2(mm) d(mm) d/2(mm) d(mm) d/2(mm) d(mm) d/2(mm) d(mm) d/2(mm)
100 40, 50 20, 25 40, 50 20, 25 40, 50 20, 25 40, 50 20, 25 40, 50 20, 25
125 40, 75 25, 37.5 40, 75 20, 37.5 40, 75 25, 37.5 40, 75 20, 37.5 40, 75 20, 37.5
150 40, 100 20, 50 40, 100 20, 50 40, 100 20, 50 40, 100 20, 50 40, 100 20, 50
175 40, 125 20, 62.5 40, 125 20, 62.5 40, 125 20, 62.5 40, 125 20, 62.5 40, 125 20, 62.5
200 40, 150 20, 75 40, 150 20, 75 40, 150 25, 75 40, 150 20, 75 40, 150 20, 75
250 80, 200 40, 100 80, 200 40, 100 80, 200 40, 100 80, 200 40, 100 80, 200 40, 100
Note : The minimum distance from the edge of C-Purlin to the centre of the first set of pre-punched holes is 25mm.
H(mm) d(mm) d/2(mm) d(mm) d/2(mm) d(mm) d/2(mm) d(mm) d/2(mm) d(mm) d/2(mm)
100 50 25 50 25 50 25 50 25 50 25
125 50, 75 25, 37.5 50, 75 25, 37.5 50, 75 25, 37.5 50, 75 25, 37.5 50, 75 25, 37.5
150 50, 100 25, 50 50, 100 25, 50 50, 100 25, 50 50, 100 25, 50 50, 100 25, 50
175 50, 125 25, 62.5 50, 125 25, 62.5 50, 125 25, 62.5 50, 125 25, 62.5 50, 125 25, 62.5
200 50, 150 25, 75 50, 150 25, 75 50, 150 25, 75 50, 150 25, 75 50, 150 25, 75
250 50, 200 25, 100 50, 200 25, 100 50, 200 25, 100 50, 200 25, 100 50, 200 25, 100
300 50, 200 25, 100 50, 200 25, 100 50, 200 25, 100 50, 200 25, 100 50, 200 25, 100
Note : The minimum distance from the edge of Z-Purlin to the centre of the first set of pre-punched holes is 25mm.
16
The purlin load table are derived in accordance to 855950 : Part 5 : 1987 “Code of Practice for Design of Cold
Formed Section” with maximum roof pitch 30° and roofing sheet distributed load 6.55kg/m2
Purlin Spacing
Size
0.9 1.2 1.5 1.8 2.1 2.4
75 x 35 x 1.6 4.0 3.7 3.4 3.2 3.1 2.9
75 x 35 x 2.0 4.3 3.9 3.7 3.5 3.3 3.1
75 x 45 x 1.6 4.3 3.9 3.6 3.4 3.3 3.1
75 x 45 x 2.0 4.5 4.1 3.9 3.7 3.5 3.3
100 x 50 x 1.6 5.4 5.0 4.6 4.4 4.2 4.0
100 x 50 x 2.0 5.8 5.3 4.9 4.7 4.4 4.3
100 x 50 x 2.5 6.1 5.6 5.2 5.0 4.7 4.5
125 x 50 x 1.6 6.4 5.9 5.5 5.2 4.9 4.7
125 x 50 x 2.0 6.8 6.3 5.8 5.5 5.3 5.1
125 x 50 x 2.5 7.2 6.7 6.2 5.9 5.6 5.4
150 x 65 x 1.6 7.7 7.1 6.6 6.3 6.0 5.7
150 x 65 x 2.0 8.2 7.6 7.1 6.7 6.4 6.1
150 x 65 x 2.5 8.7 8.0 7.5 7.1 6.8 6.5
175 x 65 x 1.6 8.7 8.0 7.5 7.1 6.7 6.4
175 x 65 x 2.0 9.2 8.5 8.0 7.5 7.2 6.9
175 x 65 x 2.5 9.8 9.0 8.5 8.0 7.7 7.4
175 x 75 x 1.6 9.0 8.2 7.7 7.3 6.9 6.7
175 x 75 x 2.0 9.5 8.8 8.2 7.8 7.4 7.1
175 x 75 x 2.5 10.1 9.3 8.7 8.3 7.9 7.6
200 x 75 x 1.6 9.9 9.1 8.5 8.0 7.7 7.4
200 x 75 x 2.0 10.5 9.7 9.1 8.6 8.2 7.9
200 x 75 x 2.5 11.1 10.2 9.6 9.1 8.7 8.4
250 x 75 x 1.6 11.7 10.7 10.1 9.5 9.1 8.7
250 x 75 x 2.0 12.4 11.4 10.7 10.2 9.7 9.3
250 x 75 x 2.5 13.1 12.1 11.4 10.8 10.3 9.9
300 x 95 x 1.6 14.1 13.0 12.2 11.6 11.1 10.6
300 x 95 x 2.0 14.9 13.9 13.0 12.4 11.8 11.4
300 x 95 x 2.5 15.8 14.7 13.8 13.1 12.6 12.1
Disclaimer : The information on the materials presented herein is provided for informational purposes only. We shall not be liable for any loss or damage
whatsoever arising from, but not limited to the usage of information provided. Any omission, error, typographical errors and technical inaccuracles
relating to the information may be changed or updated without notice.
Precautions
Contact between galvanized steel and incompatible materials (e.g. Copper tube) must be avoided as
premature corrosion could happen. Purlins should be stored off the ground on a slightly sloped position.
17
TECHNICAL SPECIFICATION REFERENCES - STEEL PIPES
Specification
BS 1387 : 1985
Welded Steel
Tubes- Light,
- 320 to 460 195 20 (N3) 0.20 - 1.20 0.045 0.045 180° 6D 3/5 D
Ordinary Piping
JIS G 3452
Pipes For
11 & 12 - 30min
SGP 290min. - - - - 0.040 0.040 90° 6D 2/3 D
(N1) Test Piece
No. 5 - 25 min
ASTM Standard
As specified in
Steel Pipes
ASTM A53
ERW 320 320 - 460 195min. 25 (N3) 0.16 - 0.30- 0.040 0.040 As specified in
BS 3601
0.70 - - BS 3601
ERW 430 430 - 570 275min. 22 (N3) 0.21 0.35 0.40- 0.040 0.040 Specification
1.20
Alpine Manufacturer
Standard Welded
Steel Pipes
APM S 002
(A) (A A) 270min. 170min. 20 (N3) 0.20 - 1.20 0.045 0.045 90° 6D 1/3 D
Notes: (N1) - When the tensile test is carried out on No.12 or No.15 test piece for the pipe under 8mm in wall thickness, the minimum value of elongation shall be obtained by
subtracting 1.5% from the thickness values of elongation given in Table above for each 1mm decrease in wall thickness, and rounding off to an integer in
accordance with JIS Z 8401 .
(N1) - The values of elongation given in Table above shall not apply to the pipe whose nominal size is 32mm or smaller.
(N2) - Bend test in table above only applied to pipes of nominal size 2” (50mm) or smaller.
(N3) - Gauge length Lo = 5.65¥So (%)
H - Distance between the plates
D - Outside diameter of the pipe
APM S 002 - Manufacturer Standard
18
WELDED STEEL PIPES
MS 863
BS 1387 - 1985
Outside Diameter Calculated Weight Number Socket
CLASS
32 1 1/4 42.5 41.9 2.6 2.54 0.774 1.71 2.57 0.78 1.73 11 51.6 54.0 50 725
40 1 1/2 48.4 47.8 2.9 3.23 0.985 2.17 3.27 1.00 2.20 11 57.9 57.2 50 725
50 2 60.2 59.6 2.9 4.08 1.24 2.73 4.15 1.26 2.78 11 70.6 63.5 50 725
65 2 1/2 76.0 75.2 3.2 5.71 1.74 3.83 5.83 1.78 3.92 11 87.3 69.9 50 725
80 3 88.7 87.9 3.2 6.72 2.05 4.52 6.89 2.10 4.63 11 101.6 76.2 50 725
100 4 113.9 113.0 3.6 9.75 2.97 6.55 10.00 3.05 6.72 11 128.6 88.9 50 725
15 1/2 21.7 21.1 2.6 1.21 0.369 0.814 1.22 0.372 0.82 14 27.8 38.1 50 725
20 3/4 27.2 26.6 2.6 1.56 0.475 1.05 1.57 0.479 1.06 14 34.1 41.3 50 725
25 1 34.2 33.4 3.2 2.41 0.735 1.62 2.43 0.741 1.63 11 42.1 47.6 50 725
32 1 1/4 42.9 42.1 3.2 3.1 0.945 2.08 3.13 0.954 2.10 11 51.6 54 50 725
MEDIUM (B)
40 1 1/2 48.8 48 3.2 3.57 1.09 2.40 3.61 1.10 2.43 11 57.9 57.2 50 725
50 2 60.8 59.8 3.6 5.03 1.53 3.37 5.10 1.55 3.42 11 70.6 63.5 50 725
65 2 1/2 76.6 75.4 3.6 6.43 1.96 4.32 6.55 2.00 4.41 11 87.3 69.9 50 725
80 3 89.5 88.1 4.0 8.37 2.55 5.62 8.54 2.60 5.73 11 101.6 76.2 50 725
100 4 114.9 113.3 4.5 12.2 3.72 8.2 12.5 3.81 8.40 11 128.6 88.9 50 725
125 5 140.6 138.7 5.0 16.6 5.06 11.2 17.1 5.21 11.5 11 155.6 95.3 50 725
150 6 166.1 164.1 5.0 19.7 6.00 13.2 20.3 6.19 13.6 11 184.2 95.3 50 725
15 1/2 21.7 21.1 3.2 1.44 0.439 0.968 1.45 0.442 0.974 14 27.8 38.1 50 725
20 3/4 27.2 26.6 3.2 1.87 0.57 1.257 1.88 0.573 1.263 14 34.1 41.3 50 725
25 1 34.2 33.4 4.0 2.94 0.896 1.98 2.96 0.902 1.99 11 42.1 47.6 50 725
32 1 1/4 42.9 42.1 4.0 3.80 1.16 2.56 3.83 1.17 2.58 11 51.6 54 50 725
40 1 1/2 48.8 48.0 4.0 4.38 1.34 2.95 4.42 1.35 2.98 11 57.9 57.2 50 725
HEAVY (C)
50 2 60.8 59.8 4.5 6.19 1.89 4.17 6.26 1.91 4.21 11 70.6 63.5 50 725
65 2 1/2 76.6 75.4 4.5 7.93 2.42 5.34 8.05 2.45 5.4 11 87.3 69.9 50 725
80 3 89.5 88.1 5.0 10.3 3.14 6.92 10.5 3.20 7.05 11 101.6 76.2 50 725
100 4 114.9 113.3 5.4 14.5 4.42 9.71 14.8 4.51 9.94 11 128.6 88.9 50 725
125 5 140.6 138.7 5.4 17.9 5.46 12.0 18.4 5.61 12.4 11 155.6 95.3 50 725
150 6 166.1 164.1 5.4 21.3 6.46 14.3 21.9 6.68 14.7 11 184.2 95.3 50 725
19
Welded Steel Pipes For General Purposes
APM S 002
EXTRA 50 2 60.2 2.30 59.6 2.35 1.9 0.075 2.72 0.829 1.83
LIGHT (AA) 65 2 1/2 76.0 2.99 75.2 2.96 1.9 0.075 3.45 1.05 2.31
80 3 88.7 3.49 87.9 3.46 2.1 0.083 4.46 1.36 3.00
90 3 1/2 102.0 3.98 101.1 3.95 2.1 0.083 5.15 1.57 3.46
100 4 113.9 4.48 113.0 4.45 2.3 0.091 6.31 1.92 4.23
125 5 140.6 5.53 138.7 5.46 4.0 0.157 13.4 4.08 8.99
150 6 166.1 6.54 164.1 6.46 4.0 0.157 15.9 4.85 10.7
25 1 33.8 1.33 33.2 1.31 1.6 0.063 1.259 0.384 0.847
32 1 1/4 42.5 1.67 41.9 1.65 1.6 0.063 1.602 0.488 1.076
40 1 1/2 48.4 1.90 47.8 1.88 1.6 0.063 1.835 0.559 1.233
50 2 60.2 2.30 59.6 2.35 1.6 0.063 2.300 0.701 1.546
(AAA) 65 2 1/2 76.0 2.99 75.2 2.96 1.6 0.063 2.920 0.890 1.962
80 3 88.7 3.49 87.9 3.46 1.6 0.063 3.421 1.043 2.300
100 4 113.9 4.48 113.0 4.45 1.9 0.075 5.226 1.593 3.513
125 5 140.6 5.53 138.7 5.46 3.0 0.118 10.11 3.082 6.796
150 6 166.1 6.54 164.1 6.46 3.0 0.118 11.99 3.655 8.059
20
Carbon Steel Pipes For Ordinary Piping
JIS G 3452 - SGP
21
Electric Welded Non-alloy Steel Tubes for Cement Lined Pipes
MS 1968 / BS EN 10224 / BS 534 / Manufacturer’s Standard
Outside Diameter* Minimum Wall Thickness* Outside Diameter Calculated Weight Maximum Test Pressure
max. min. Plain Ends
mm mm mm mm kg/m bar
114.3 3.6 115.4 113.2 9.83 70
139.7 3.6 141.1 138.3 12.08 70
168.3 3.6 170.0 166.6 14.62 70
193.7 4.0 195.2 192.2 18.71 70
219.1 4.0 221.3 216.9 21.22 70
244.5 4.0 246.3 242.7 23.72 70
273.0 4.0 275.0 271.0 26.53 64
323.9 4.0 326.3 321.5 31.55 54
355.6 4.5 358.3 352.9 38.96 56
Note:
Other diameters and / or thicknesses may be available by agreement with the manufacturer.
mm mm mm mm kg/m
121.9 4.1 123.1 120.7 11.91
152.4 4.0 153.9 150.9 14.64
177.3 4.1 178.6 176.0 17.51
232.2 4.1 283.9 230.5 23.06
286.0 4.1 288.2 283.9 28.50
345.4 5.8 348.0 342.8 48.57
Note:
*Thickness tolerances: ± 10%
22
SQUARE HOLLOW SECTIONS
Y
x x
Y ASTM A - 500
Moment of Section Modulus Radius of Plastic Modulus
Wall Calculated Sectional Inertia Gyration
Nominal Size Thickness Weight Area lx ly Zx Zy ix iy Sx Sy
mm in. mm kg/m kg/6m cm2 cm4 cm4 cm3 cm3 cm cm cm3 cm3
20 x 20 — 1.6 0.873 5.238 1.112 0.608 0.608 0.608 0.608 0.739 0.739 0.751 0.751
25 x 25 1x1 1.6 1.160 6.960 1.48 1.34 1.34 1.07 1.07 0.95 0.95 1.29 1.29
2.3 1.600 9.600 2.04 1.75 1.75 1.40 1.40 0.93 0.93 1.73 1.73
3.0 2.010 12.060 2.56 2.06 2.06 1.65 1.65 0.90 0.90 2.10 2.10
30 x 30 — 1.6 1.410 8.460 1.80 2.40 2.40 1.60 1.60 1.16 1.16 1.91 1.91
2.3 1.970 11.820 2.50 3.19 3.19 2.12 2.12 1.13 1.13 2.59 2.59
3.0 2.480 14.880 3.16 3.83 3.83 2.55 2.55 1.10 1.10 3.18 3.18
32 x 32 1 1/4 x 1 1/4 1.6 1.510 9.060 1.92 2.95 2.95 1.84 1.84 1.24 1.24 2.19 2.19
1.8 1.690 10.140 2.15 3.25 3.25 2.03 2.03 1.23 1.23 2.42 2.42
2.0 1.860 11.160 2.37 3.53 3.53 2.21 2.21 1.22 1.22 2.65 2.65
2.3 2.110 12.660 2.69 3.93 3.93 2.46 2.46 1.21 1.21 2.98 2.98
3.0 2.670 16.020 3.40 4.75 4.75 2.97 2.97 1.18 1.18 3.68 3.68
3.2 2.830 16.980 3.60 4.95 4.95 3.10 3.10 1.17 1.17 3.86 3.86
35 x 35 — 1.6 1.626 9.756 2.07 3.79 3.79 2.17 2.17 1.35 1.35 2.57 2.57
2.0 1.992 11.952 2.54 4.51 4.51 2.58 2.58 1.33 1.33 3.09 3.09
2.3 2.255 13.530 2.87 4.99 4.99 2.85 2.85 1.32 1.32 3.46 3.46
3.0 2.833 16.998 3.61 5.95 5.95 3.40 3.40 1.28 1.28 4.23 4.23
38 x 38 1 1/2 x 1 1/2 1.6 1.810 10.860 2.31 5.08 5.08 2.67 2.67 1.48 1.48 3.14 3.14
2.0 2.230 13.380 2.85 6.12 6.12 3.22 3.22 1.47 1.47 3.83 3.83
2.3 2.540 15.240 3.24 6.85 6.85 3.61 3.61 1.45 1.45 4.32 4.32
3.0 3.240 19.440 4.12 8.38 8.38 4.41 4.41 1.43 1.43 5.38 5.38
40 x 40 — 1.6 1.880 11.280 2.39 5.79 5.79 2.90 2.90 1.56 1.56 3.41 3.41
1.9 2.200 13.200 2.80 6.67 6.67 3.33 3.33 1.55 1.55 4.05 4.05
2.0 2.310 13.860 2.94 6.94 6.94 3.47 3.47 1.54 1.54 4.13 4.13
2.3 2.620 15.720 3.33 7.73 7.73 3.86 3.86 1.52 1.52 4.96 4.96
3.0 3.300 19.800 4.21 9.39 9.39 4.70 4.70 1.51 1.51 6.27 6.27
50 x 50 2x2 1.6 2.410 14.460 3.08 12.0 12.0 4.79 4.79 1.97 1.97 5.57 5.57
1.9 2.800 16.800 3.62 13.92 13.92 5.57 5.57 1.96 1.96 6.52 6.52
2.3 3.410 20.460 4.34 16.4 16.4 6.56 6.56 1.94 1.94 7.74 7.74
3.0 4.250 25.500 5.41 19.5 19.5 7.79 7.79 1.90 1.90 9.39 9.39
4.0 5.450 32.700 6.95 23.7 23.7 9.49 9.49 1.85 1.85 11.7 11.7
4.5 6.020 36.120 7.67 25.5 25.5 10.2 10.2 1.82 1.82 12.8 12.8
5.0 6.560 39.360 8.36 27.0 27.0 10.8 10.8 1.80 1.80 13.7 13.7
6.0 7.560 45.360 9.63 29.5 29.5 11.8 11.8 1.75 1.75 15.3 15.3
60 x 60 — 1.6 2.880 17.280 3.67 20.70 20.70 6.89 6.89 2.37 2.37 8.66 8.66
2.3 4.060 24.360 5.17 28.30 28.30 9.44 9.44 2.34 2.34 11.0 11.0
3.0 5.180 31.080 6.60 35.04 35.04 11.7 11.7 2.30 2.30 14.0 14.0
4.0 6.710 40.260 8.55 42.30 42.30 14.1 14.1 2.24 2.24 17.8 17.8
4.5 7.430 44.580 9.46 46.88 46.88 15.6 15.6 2.22 2.22 19.5 19.5
65 x 65 2 1/2 x 2 1/2 1.6 3.133 18.798 3.99 26.5 26.5 8.2 8.2 2.58 2.58 9.4 9.4
2.3 4.420 26.520 5.63 36.4 36.4 11.2 11.2 2.54 2.54 13.1 13.1
3.0 5.660 33.960 7.21 45.4 45.4 14.0 14.0 2.51 2.51 16.6 16.6
4.0 7.340 44.040 9.35 56.6 56.6 17.4 17.4 2.46 2.46 21.0 21.0
4.5 8.140 48.840 10.37 61.6 61.6 18.9 18.9 2.44 2.44 23.1 23.1
5.0 8.920 53.520 11.36 66.1 66.1 20.3 20.3 2.41 2.41 25.0 25.0
6.0 10.400 62.400 13.23 73.9 73.9 22.7 22.7 2.36 2.36 28.5 28.5
75 x 75 3x3 1.6 3.636 21.816 4.63 41.3 41.3 11.0 11.0 2.99 2.99 12.7 12.7
2.3 5.140 30.840 6.55 57.1 57.1 15.2 15.2 2.95 2.95 17.7 17.7
3.0 6.600 39.600 8.41 71.6 71.6 19.1 19.1 2.92 2.92 22.5 22.5
4.0 8.600 51.600 10.95 90.2 90.2 24.0 24.0 2.87 2.87 28.8 28.8
4.5 9.550 57.300 12.17 98.6 98.6 26.3 26.3 2.85 2.85 31.7 31.7
5.0 10.500 63.000 13.36 106.0 106.0 28.4 28.4 2.82 2.82 34.5 34.5
6.0 12.300 73.800 15.63 120.0 120.0 32.0 32.0 2.77 2.77 39.6 39.6
80 x 80 — 2.30 5.505 33.028 7.01 69.9 69.9 17.5 17.5 3.16 3.16 20.3 20.3
3.00 7.072 42.430 9.01 87.8 87.8 22.0 22.0 3.12 3.12 25.8 25.8
4.00 9.223 55.336 11.75 111.0 111.0 27.8 27.8 3.07 3.07 33.1 33.1
4.50 10.259 61.556 13.07 121.6 121.6 30.4 30.4 3.05 3.05 36.5 36.5
5.00 11.270 67.622 14.36 131.5 131.5 32.9 32.9 3.03 3.03 39.7 39.7
6.00 13.215 79.289 16.83 149.2 149.2 37.3 37.3 2.98 2.98 45.8 45.8
23
SQUARE HOLLOW SECTIONS (Continued)
Y
x x
Y ASTM A - 500
Moment of Radius of
Wall Calculated Sectional Inertia Section Modulus Gyration Plastic Modulus
Nominal Size
Thickness Weight Area lx ly Zx Zy ix iy Sx Sy
mm in. mm kg/m kg/6m cm2 cm4 cm4 cm3 cm3 cm cm cm3 cm3
90 x 90 3 1/2 x 3 1/2 2.3 6.230 37.380 7.93 101.0 101.0 22.4 22.4 3.56 3.56 25.9 25.9
3.0 8.010 48.060 10.21 127.0 127.0 28.3 28.3 3.53 3.53 33.0 33.0
4.0 10.500 63.000 13.35 162.0 162.0 36.0 36.0 3.48 3.48 42.6 42.6
4.5 11.700 70.200 14.87 178.0 178.0 39.5 39.5 3.46 3.46 47.1 47.1
5.0 12.800 76.800 16.36 193.0 193.0 42.9 42.9 3.43 3.43 51.4 51.4
6.0 15.100 90.600 19.23 220.0 220.0 49.0 49.0 3.39 3.39 59.5 59.5
100 x 100 4x4 2.3 6.950 41.700 8.85 140.0 140.0 27.9 27.9 3.97 3.97 32.3 32.3
3.0 8.960 53.760 11.41 177.0 177.0 35.4 35.4 3.94 3.94 41.2 41.2
4.0 11.700 70.200 14.95 226.0 226.0 45.3 45.3 3.89 3.89 53.3 53.3
4.5 13.100 78.600 16.67 249.0 249.0 49.9 49.9 3.87 3.87 59.0 59.0
5.0 14.400 86.400 18.36 271.0 271.0 54.2 54.2 3.84 3.84 64.6 64.6
6.0 17.000 102.000 21.63 311.0 311.0 62.3 62.3 3.79 3.79 75.1 75.1
9.0 24.100 144.600 30.00 391.0 391.0 78.1 78.1 3.61 3.61 98.6 98.6
120 x 120 - 2.3 8.394 50.364 10.69 245.3 245.3 40.9 40.9 4.79 4.79 47.0 47.0
3.0 10.840 65.040 13.81 312.4 312.4 52.1 52.1 4.76 4.76 60.2 60.2
4.0 14.247 85.482 18.15 402.3 402.3 67.0 67.0 4.71 4.71 78.3 78.3
4.5 15.911 95.466 20.27 444.7 444.7 74.1 74.1 4.68 4.68 87.0 87.0
5.0 17.550 105.300 22.36 485.5 485.5 80.9 80.9 4.66 4.66 95.5 95.5
6.0 20.751 124.506 26.43 562.2 562.2 93.7 93.7 4.61 4.61 111.6 111.6
9.0 29.732 178.392 37.88 755.3 755.0 125.9 125.9 4.47 4.47 154.5 154.5
125 x 125 5x5 3.0 11.300 67.800 14.41 354.0 354.0 56.7 56.7 4.96 4.96 65.6 65.6
4.0 14.900 89.400 18.95 457.0 457.0 73.2 73.2 4.91 4.91 85.3 85.3
4.5 16.600 99.600 21.17 506.0 506.0 80.9 80.9 4.89 4.89 94.8 94.8
5.0 18.300 109.800 23.36 553.0 553.0 88.4 88.4 4.86 4.86 104 104
6.0 21.700 130.200 27.63 641.0 641.0 103.0 103.0 4.82 4.82 122 122
9.0 31.100 186.600 39.00 838.0 838.0 134.0 134.0 4.64 4.64 165 165
150 x 150 6x6 3.0 13.700 82.200 17.41 623.0 623.0 83.0 83.0 5.98 5.98 95.5 95.5
4.0 18.000 108.000 22.95 808.0 808.0 108.0 108.0 5.93 5.93 125 125
4.5 20.200 121.200 25.67 896.0 896.0 120.0 120.0 5.91 5.91 139 139
5.0 22.300 133.800 28.36 982.0 982.0 131.0 131.0 5.89 5.89 153 153
6.0 26.400 158.400 33.63 1146.0 1146.0 153.0 153.0 5.84 5.84 180 180
9.0 38.200 229.200 48.00 1540.0 1540.0 205.0 205.0 5.66 5.66 248 248
180 x 180 - 4.00 21.783 130.698 27.75 1421.8 1421.8 158.0 158.0 7.16 7.16 182.2 182.2
4.50 24.389 146.334 31.07 1581.3 1581.3 175.7 175.7 7.13 7.13 203.3 203.3
5.00 26.970 161.820 34.36 1736.9 1736.9 193.0 193.0 7.11 7.11 224.0 224.0
6.00 32.055 192.330 40.83 2036.6 2036.6 226.3 226.3 7.06 7.06 264.4 264.4
9.00 46.690 280.140 59.48 2846.1 2846.1 316.2 316.2 6.92 6.92 376.7 376.7
200 x 200 8x8 4.00 24.295 145.770 30.95 1968.2 1968.2 196.8 196.8 7.97 7.97 226.4 226.4
4.50 27.215 163.290 34.67 2191.6 2191.6 219.2 219.2 7.95 7.95 252.9 252.9
5.00 30.110 180.660 38.36 2410.2 2410.2 241.0 241.0 7.93 7.93 278.9 278.9
6.00 35.823 214.938 45.63 2832.9 2832.9 283.3 283.3 7.88 7.88 329.7 329.7
9.00 52.342 314.052 66.68 3988.8 3988.8 398.9 398.9 7.73 7.73 472.4 472.4
10.00 57.641 345.846 73.43 4337.9 4337.9 433.8 433.8 7.69 7.69 516.8 516.8
12.00 67.932 407.592 86.54 4983.9 4983.9 498.4 498.4 7.59 7.59 600.9 600.9
16.00 87.274 523.644 111.18 6076.9 6076.9 607.7 607.7 7.39 7.39 750.7 750.7
250 x 250 10 x 10 5.00 37.960 227.760 48.36 4805.1 4805.1 384.4 384.4 9.97 9.97 442.3 442.3
6.00 45.243 271.458 57.63 5672.2 5672.2 453.8 453.8 9.92 9.92 524.5 524.5
9.00 66.472 398.832 84.68 8093.6 8093.6 647.5 647.5 9.78 9.78 758.8 758.8
10.00 73.341 440.046 93.43 8842.3 8842.3 707.4 707.4 9.73 9.73 832.8 832.8
12.00 86.772 520.632 110.54 10254.8 10254.8 820.4 820.4 9.63 9.63 975.0 975.0
16.00 112.394 674.364 143.18 12752.3 12752.3 1020.2 1020.2 9.44 9.44 1235.9 1235.9
300 x 300 12 x 12 6.00 54.663 327.978 69.63 9963.9 9963.9 664.3 664.3 11.96 11.96 764.2 764.2
9.00 80.602 483.612 102.68 14341.3 14341.3 956.1 956.1 11.82 11.82 1112.7 1112.7
10.00 89.041 534.246 113.43 15714.5 15714.5 1047.6 1047.6 11.77 11.77 1223.9 1223.9
12.00 105.612 633.672 134.54 18335.4 18335.4 1222.4 1222.4 11.67 11.67 1439.1 1439.1
16.00 137.514 825.084 175.18 23089.4 23089.4 1539.3 1539.3 11.48 11.48 1841.0 1841.0
350 x 350 14 x 14 6.00 64.083 384.498 81.63 16008.1 16008.1 914.7 914.7 14.00 14.00 1049.0 1049.0
9.00 94.732 568.392 120.68 23182.0 23182.0 1324.7 1324.7 13.86 13.86 1534.1 1534.1
10.00 104.741 628.446 133.43 25454.7 25454.7 1454.6 1454.6 13.81 13.81 1690.0 1690.0
12.00 124.452 746.712 158.54 29825.7 29825.7 1704.3 1704.3 13.72 13.72 1993.3 1993.3
16.00 162.634 975.804 207.18 37888.2 37888.2 2165.0 2165.0 13.52 13.52 2566.1 2566.1
24
RECTANGULAR HOLLOW SECTIONS
Y
x x
ASTM A - 500
Y
Moment of Section Modulus Radius of Plastic Modulus
Nominal Size Wall Calculated Sectional Inertia Gyration
Thickness Weight Area lx ly Zx Zy ix iy Sx Sy
mm in. mm kg/m kg/6m cm2 cm4 cm4 cm3 cm3 cm cm cm3 cm3
38 x 19 1 1/2 x 3/4 1.6 1.330 7.980 1.700 3.060 1.010 1.610 1.060 1.340 0.771 2.080 1.260
38 x 25 1 1/2 x 1 1.6 1.490 8.940 1.89 3.70 1.91 1.95 1.53 1.40 1.01 2.42 1.80
50 x 25 2x1 1.6 1.790 10.740 2.28 7.29 2.44 2.91 1.95 1.79 1.03 3.69 2.25
2.3 2.510 15.060 3.19 9.86 3.23 3.94 2.59 1.76 1.01 5.11 3.09
3.0 3.190 19.140 4.06 12.10 3.89 4.84 3.11 1.73 0.98 6.43 3.84
65 x 35 2 1/2 x 1 3/8 1.6 2.380 14.280 3.03 16.87 6.47 5.19 3.70 2.36 1.46 6.39 4.17
1.9 2.797 16.782 3.56 19.54 7.46 6.01 4.26 2.34 1.45 7.46 4.85
2.3 3.338 20.028 4.25 22.88 8.69 7.04 4.96 2.32 1.43 8.81 5.72
3.0 4.246 25.476 5.41 28.11 10.57 8.65 6.04 2.28 1.40 10.99 7.11
4.0 5.455 32.730 6.95 34.29 12.73 10.55 7.27 2.22 1.35 13.73 8.83
65 x 38 2 1/2 x 1 1/2 1.6 2.490 14.940 3.17 18.30 7.94 5.63 4.18 2.40 1.58 6.91 4.75
1.9 2.880 17.280 3.67 21.02 9.12 6.46 4.80 2.35 1.56 8.14 5.58
2.3 3.520 21.120 4.48 25.20 10.80 7.74 5.69 2.37 1.55 9.68 6.62
3.0 4.390 26.340 5.29 29.80 12.80 9.18 6.75 2.31 1.51 12.30 8.36
3.2 4.650 27.900 5.92 31.30 13.40 9.63 7.06 2.30 1.51 13.00 8.84
4.0 5.640 33.840 7.19 36.50 15.50 11.20 8.17 2.25 1.47 15.80 10.60
75 x 25 3x1 1.6 2.380 14.280 3.03 20.10 3.51 5.35 2.81 2.55 1.07 7.12 3.21
1.9 2.800 16.800 3.56 23.30 4.03 6.22 3.22 2.53 1.05 8.37 3.75
2.3 3.340 20.040 4.25 27.40 4.67 7.31 3.74 2.51 1.04 10.01 4.44
3.0 4.250 25.500 5.40 33.90 5.66 9.04 4.52 2.47 1.01 12.62 5.52
4.0 5.450 32.700 6.95 41.94 6.77 11.18 5.42 2.42 0.97 16.23 6.94
4.5 6.020 36.120 7.67 45.43 7.22 12.11 5.77 2.40 0.96 17.93 7.57
75 x 38 3 x 1 1/2 1.6 2.710 16.260 3.45 25.30 8.85 6.76 4.66 2.71 1.60 8.59 5.34
1.9 3.180 19.080 4.06 29.40 10.20 7.85 5.39 2.69 1.59 10.10 6.26
2.3 3.810 22.860 4.85 34.60 12.00 9.23 6.30 2.67 1.57 12.10 7.44
3.0 4.860 29.160 6.19 42.80 14.70 11.40 7.72 2.63 1.54 15.30 9.41
3.2 5.150 30.900 6.56 45.00 15.40 12.00 8.09 2.62 1.53 16.30 9.95
4.0 6.270 37.620 7.99 52.80 17.90 14.10 9.40 2.57 1.50 19.80 12.00
4.5 6.940 41.640 8.84 57.10 19.20 15.20 10.10 2.54 1.47 21.90 13.20
75 x 50 3x2 1.6 3.008 18.048 3.83 30.51 16.39 8.14 6.56 2.82 2.07 9.75 7.40
1.9 3.540 21.240 4.51 35.50 19.10 9.48 7.62 2.81 2.05 11.80 8.88
2.3 4.240 25.440 5.40 41.90 22.40 11.20 8.96 2.79 2.04 14.10 10.60
3.0 5.420 32.520 6.91 52.20 27.80 13.90 11.10 2.75 2.00 17.90 13.50
4.0 7.020 42.120 8.95 65.00 34.30 17.30 13.70 2.69 1.96 23.20 17.30
4.5 7.790 46.740 9.92 70.60 37.20 18.80 14.90 2.67 1.94 25.70 19.10
5.0 8.530 51.180 10.86 75.60 39.70 20.20 15.90 2.64 1.91 28.10 20.90
6.0 9.920 59.520 12.63 84.40 44.10 22.50 17.60 2.58 1.87 32.60 24.10
100 x 50 4x2 1.6 3.636 21.816 4.63 61.3 21.08 12.26 8.43 3.64 2.13 15.04 9.33
1.9 4.290 25.740 5.46 71.6 24.5 14.3 9.8 3.62 2.12 18.1 11.2
2.3 5.140 30.840 6.55 84.8 29.0 17.0 11.6 3.60 2.10 21.7 13.3
3.0 6.600 39.600 8.41 106.0 36.1 21.3 14.4 3.56 2.07 27.8 17.0
4.0 8.600 51.600 10.95 134.0 44.9 26.8 18.0 3.50 2.03 36.1 21.9
4.5 9.550 57.300 12.17 147.0 48.9 29.3 19.5 3.47 2.00 40.1 24.3
5.0 10.500 63.000 13.36 158.0 52.5 31.6 21.0 3.44 1.98 44.0 26.5
6.0 12.300 73.800 15.63 179.0 58.7 35.7 23.5 3.38 1.94 51.4 30.7
100 x 75 4x3 2.3 6.046 36.276 7.70 112.3 72.3 22.5 19.3 3.82 3.06 26.6 21.9
3.0 7.780 46.680 9.91 142.0 91.1 28.4 24.3 3.78 3.03 35.1 28.7
4.0 10.200 61.200 12.95 180.0 115.0 36.0 30.8 3.73 2.99 45.7 37.4
4.5 11.300 67.800 14.42 198.0 127.0 39.6 33.7 3.71 2.96 50.9 41.5
5.0 12.500 75.000 15.86 215.0 137.0 42.9 36.5 3.68 2.94 55.9 45.6
6.0 14.600 87.600 18.63 245.0 156.0 49.0 41.6 3.63 2.89 65.5 53.3
120 x 60 — 3.0 8.013 48.078 10.21 189.1 64.4 31.5 21.5 4.30 2.51 39.2 24.2
4.0 10.479 62.874 13.35 240.8 81.3 40.1 27.1 4.25 2.47 50.5 31.1
4.5 11.672 70.032 14.87 264.5 88.9 44.1 29.6 4.22 2.44 55.8 34.3
5.0 12.840 77.040 16.36 287.0 96.0 47.8 32.0 4.19 2.42 61.0 37.4
6.0 15.099 90.594 19.23 328.0 108.8 54.7 36.3 4.13 2.38 70.6 43.1
120 x 80 — 3.0 8.956 53.736 11.41 230.2 123.4 38.4 30.9 4.49 3.29 46.2 35.0
4.0 11.735 70.410 14.95 294.6 157.3 49.1 39.3 4.44 3.24 59.8 45.2
4.5 13.085 78.510 16.67 324.6 173.0 54.1 43.2 4.41 3.22 66.2 50.1
5.0 14.410 86.460 18.36 353.2 187.8 58.9 46.9 4.39 3.20 72.5 54.7
6.0 16.983 101.898 21.63 406.1 215.0 67.7 53.8 4.33 3.15 84.3 63.6
25
RECTANGULAR HOLLOW SECTIONS (Continued)
Y
x x
ASTM A - 500
Y
Moment of Section Modulus Radius of Plastic Modulus
Nominal Size Wall Calculated Sectional Inertia Gyration
Thickness Weight Area lx ly Zx Zy ix iy Sx Sy
mm in. mm kg/m kg/6m cm2 cm4 cm4 cm3 cm3 cm cm cm3 cm3
125x 50 5x2 2.3 6.046 36.276 7.70 148.2 35.5 23.7 14.2 4.39 2.15 29.9 15.7
3.0 7.780 46.680 9.91 187.0 44.4 29.9 17.7 4.34 2.12 39.5 20.5
4.0 10.200 61.200 12.95 238.0 55.6 38.0 22.2 4.28 2.07 51.6 26.5
4.5 11.300 67.800 14.42 261.0 60.6 41.7 24.2 4.25 2.05 57.4 29.4
5.0 12.500 75.000 15.86 282.0 65.2 45.2 26.1 4.22 2.03 63.1 32.1
6.0 14.600 87.600 18.63 322.0 73.3 51.5 29.3 4.16 1.98 74.0 37.3
125 x 75 5x3 2.3 6.949 41.694 8.85 191.5 87.5 30.6 23.3 4.65 3.14 37.0 26.1
3.0 8.960 53.760 11.41 243.0 111.0 38.9 29.5 4.61 3.12 48.7 34.1
4.0 11.700 70.200 14.95 311.0 141.0 49.7 37.5 4.56 3.07 63.7 44.5
4.5 13.100 78.600 16.67 342.0 155.0 54.8 41.2 4.53 3.04 70.9 49.5
5.0 14.400 86.400 18.36 373.0 168.0 59.6 44.7 4.50 3.02 78.1 54.3
6.0 17.000 102.000 21.63 428.0 192.0 68.5 51.1 4.45 2.98 91.9 63.7
9.0 24.100 144.600 31.23 626.0 269.0 98.5 70.6 4.47 2.94 126.3 86.5
150 x 50 6x2 2.3 6.949 41.694 8.85 235.7 42.0 31.4 16.8 5.16 2.18 40.3 18.5
3.0 8.960 53.760 11.41 299.0 52.6 39.8 21.1 5.12 2.15 53.2 24.1
4.0 11.700 70.200 14.95 381.0 66.2 50.9 26.5 5.05 2.10 69.5 31.1
4.5 13.100 78.600 16.67 420.0 72.2 56.0 28.9 5.02 2.08 77.5 34.5
5.0 14.400 86.400 18.36 456.0 77.9 60.8 31.1 4.99 2.06 85.3 37.8
6.0 17.000 102.000 21.63 523.0 87.9 69.8 35.2 4.92 2.02 100.0 43.9
150 x 75 6x3 2.3 7.852 47.112 10.00 298.4 102.7 39.8 27.4 5.46 3.20 48.8 30.3
3.0 10.100 60.600 12.91 380.0 130.0 50.6 34.7 5.42 3.17 64.2 39.5
4.0 13.300 79.800 16.95 488.0 166.0 65.1 44.2 5.37 3.13 84.1 51.6
4.5 14.900 89.400 18.92 539.0 183.0 71.9 48.7 5.34 3.11 93.8 57.4
5.0 16.400 98.400 20.86 588.0 198.0 78.4 52.9 5.31 3.08 103.0 63.1
6.0 19.300 115.800 24.63 679.0 228.0 90.5 60.7 5.25 3.04 122.0 74.0
9.0 27.600 165.600 35.17 905.0 297.0 121.0 79.2 5.07 2.91 172.0 105.0
150x 100 6x4 3.0 11.311 67.866 14.41 460.7 247.6 61.4 49.5 5.65 4.15 73.5 55.8
4.0 14.900 89.400 18.95 595.0 319.0 79.3 63.7 5.60 4.10 98.7 74.5
4.5 16.600 99.600 21.17 658.0 352.0 87.7 70.4 5.58 4.08 110.0 83.1
5.0 18.300 109.800 23.36 719.0 384.0 95.9 76.8 5.55 4.05 122.0 91.5
6.0 21.700 130.200 27.63 835.0 444.0 111.1 88.8 5.50 4.01 144.0 108.0
9.0 31.100 186.600 39.67 1129.0 595.0 150.5 119.0 5.33 3.87 190.0 143.0
160 x 80 — 12.0 39.672 238.032 50.54 1350.0 705.1 180.0 141.0 5.17 3.74 233.9 175.4
3.0 10.840 65.040 13.81 463.8 159.0 58.0 39.8 5.80 3.39 71.4 44.3
3.2 11.529 69.174 14.69 491.4 168.3 61.4 42.1 5.78 3.38 75.8 47.0
4.0 14.247 85.482 18.15 597.7 203.6 74.7 50.9 5.74 3.35 92.9 57.4
4.5 15.911 95.466 20.27 661.0 224.3 82.6 56.1 5.71 3.33 103.2 63.7
5.0 17.550 105.300 22.36 721.7 244.1 90.2 61.0 5.68 3.30 113.2 69.7
6.0 20.751 124.505 26.43 836.1 280.9 104.5 70.2 5.62 3.26 132.3 81.3
9.0 29.734 178.404 37.88 1123.7 370.2 140.5 92.6 5.45 3.13 183.1 111.6
26
RECTANGULAR HOLLOW SECTIONS (Continued)
Y
x x
ASTM A - 500
Y
Moment of Section Modulus Radius of Plastic Modulus
Nominal Size Wall Calculated Sectional Inertia Gyration
Thickness Weight Area lx ly Zx Zy ix iy Sx Sy
mm in. mm kg/m kg/6m cm2 cm4 cm4 cm3 cm3 cm cm cm3 cm3
200 x 100 8x4 4.0 18.000 108.000 22.95 1200.0 411.0 120.0 82.2 7.23 4.23 152.0 93.7
4.5 20.200 121.200 25.67 1331.0 455.0 133.0 90.9 7.20 4.21 170.0 105.0
5.0 22.300 133.800 28.36 1459.0 497.0 146.0 99.4 7.17 4.19 188.0 115.0
6.0 26.400 158.400 33.63 1703.0 577.0 170.0 115.0 7.12 4.14 222.0 136.0
9.0 38.200 229.200 48.00 2280.0 764.0 228.0 153.0 6.89 3.99 293.0 180.0
12.0 49.092 294.552 62.54 2860.4 938.8 286.0 187.8 6.76 3.87 375.3 228.2
200 x 150 8x6 4.0 21.155 126.930 26.95 1584.0 1021.1 158.4 136.1 7.67 6.16 187.2 154.1
4.5 23.683 142.098 30.17 1761.6 1134.6 176.2 151.3 7.64 6.13 208.9 171.8
5.0 26.185 157.110 33.36 1934.7 1245.1 193.5 166.0 7.62 6.11 230.1 189.2
6.0 31.113 186.678 39.63 2268.1 1457.2 226.8 194.3 7.56 6.06 271.5 223.1
9.0 45.277 271.662 57.68 3167.3 2024.9 316.7 270.0 7.41 5.93 386.4 316.9
12.0 58.512 351.072 74.54 3167.3 2024.9 316.7 270.0 7.41 5.93 386.4 316.9
250 x 150 10 x 6 4.0 24.295 145.770 30.95 2697.0 1234.3 215.8 164.6 9.34 6.32 259.6 183.3
4.5 27.215 163.290 34.67 3003.9 1372.8 240.3 183.0 9.31 6.29 289.9 204.6
5.0 30.110 180.660 38.36 3304.3 1508.0 264.3 201.1 9.28 6.27 319.8 225.5
6.0 35.823 214.938 45.63 1768.4 3885.7 310.9 235.8 9.23 6.23 378.1 266.3
9.0 52.342 314.052 66.68 2472.8 5478.7 438.3 329.7 9.06 6.09 541.9 380.4
10.0 57.641 345.846 73.43 2683.0 5960.6 476.8 357.7 9.01 6.04 592.8 415.7
12.0 67.932 407.592 86.54 3068.3 6853.3 548.3 409.1 8.90 5.95 689.4 482.3
16.0 87.274 523.644 111.18 3706.5 8365.0 669.2 494.2 8.67 5.77 861.5 600.0
300 x 200 12 x 8 4.5 34.280 205.680 43.67 5662.0 3051.7 377.5 305.2 11.39 8.36 448.7 340.8
5.0 37.960 227.760 48.36 6241.2 3361.0 416.1 336.1 11.36 8.34 495.7 376.4
6.0 45.243 271.458 57.63 7370.5 3962.3 491.4 396.2 11.31 8.29 587.8 446.1
9.0 66.472 398.832 84.68 10529.5 5631.6 702.0 563.2 11.15 8.16 850.8 644.3
10.0 73.341 440.046 93.43 11507.9 6144.5 767.2 614.5 11.10 8.11 933.9 706.8
12.0 86.772 520.632 110.54 13355.8 7107.4 890.4 710.7 10.99 8.02 1093.5 826.5
16.0 112.394 674.364 143.18 16630.1 8792.2 1108.7 879.2 10.78 7.84 1386.6 1045.1
400 x 200 16 x 8 4.5 41.345 248.070 52.67 11315.9 3911.8 565.8 391.2 14.66 8.62 689.6 428.8
5.0 45.810 274.860 58.36 12490.2 4311.8 624.5 431.2 14.63 8.60 762.5 473.9
6.0 54.663 327.978 69.63 14789.8 5091.7 739.5 509.2 14.57 8.55 906.0 562.5
9.00 80.602 483.612 102.68 21304.0 7274.5 1065.2 727.4 14.40 8.42 1319.1 816.2
10.00 89.041 534.246 113.43 23349.3 7951.2 1167.5 795.1 14.35 8.37 1451.0 896.8
12.00 105.612 633.672 134.54 27254.6 9231.0 1362.7 923.1 14.23 8.28 1706.2 1052.1
16.00 137.514 825.084 175.18 34342.2 11507.5 1717.1 1150.7 14.00 8.10 2182.5 1339.5
400 x 300 16 x 12 9.00 94.732 568.392 120.68 28184.9 18153.2 1409.2 1210.2 15.28 12.26 1671.0 1374.6
10.00 104.741 628.446 133.43 30956.0 19921.2 1547.8 1328.1 15.23 12.22 1841.0 1513.9
12.00 124.452 746.712 158.54 36290.2 23314.9 1814.5 1554.3 15.13 12.13 2171.8 1784.7
16.00 162.634 975.804 207.18 46145.5 29548.7 2307.3 1969.9 14.92 11.94 2796.9 2295.4
27
COLD ROLLED SQUARE HOLLOW SECTIONS
Y
x x
APM S001
B
T
H
x x
T APM S001
Y
29
Pipe Specification API 5L API 5LU
30
Wall Thickness Seamless Pipe: Grade A, B X42 through X70
2.875 in. OD and smaller + 20.0% - 12.5% + 15.0% - 12.5% Seamless Pipe:
3-1/2 in. OD + 18.0% - 12.5% + 15.0% - 12.5% 18 in. OD and smaller + 15.0% - 12.5%
4 in. through 18 in. OD + 15.0% - 12.5% + 15.0% - 12.5% 20 in. OD abd larger +17.5% - 10.0%
20 in. OD and larger + 15.0% - 12.5% + 17.5% - 10.0%
Standard weight
TOLERANCES (Excerpts From API Specifications)
Note *1 Pipe and tolerances are applicable 4 in. from either end.
*2 Not applicable to pipe hydrostatically tested to pressures in excess of standard test pressures.
TOLERANCES (Excerpts From API Specifications) (Continued)
Tensile and Chemical Requirements (Excerpts from API Specifications, 1983 edition)
Tensile Requirements
Grade Yield Strength Tensile Strength Elongation
Application
2 2
psi MPa kg/mm psi MPa kg/mm % min
min min min min min min
API 5L Grade A 30,000 207 21.1 48,000 331 33.7
A 0.2
e = 625,000
U 0.9
where:
e = minimum elongation in 2 inches (50.8mm) in per cent rounded to the nearest 1/2 per cent.
A = cross sectional area of the tensile test specimen in square inches, based on specified outside
diameter or nominal specimen width and specified wall thickness rounded to the nearest 0.01 sq.
in., or 0.75 sq. in., whichever is smaller.
U = specified tensile strength, psi.
*3 The minimum tensile strength for grade X60 electric-resistance welded pipe in all sizes and wall thick-
nesses shall be 75,000 psi (52.7 kg/mm2).
*4 Tensile strength means min. value/max. value
*5 Figures in parentheses are values for seamless pipe. Upper line value means non-expanded. Lowerline
value means cold-expanded. In grades X42 through X65, for each reduction of 0.01 per cent below the
maximum carbon content, an increase of 0.05 per cent manganese above the specified maximum is
permissible, up to a maximum of 1.45 per cent for X52 and lower and up to a maximum of 1.60 per cent
for grades higher than X52.
*6 Other chemical analyses may be furnished by agreement between purchaser and manufacturer.
*7 Either columbium, vanadium, titanium, or a combination thereof, shall be used at the discretion of the
manufacturer.
31
TOLERANCES (Excerpts From API Specifications) (Continued)
*8 For grades X65 in. sizes 16 in. and larger with wall thickness 0.500 in. and less, the chemical
composition shall be as shown or as agreed upon between the purchaser and manufacturer. For other
sizes and wall thickness the chemical composition shall be as agreed upon between the purchaser and
manufacturer. (Applicable to welded pipe only.)
*9 Either columbium or vanadium or a combination of both shall be used at the discretion of the
manufacturer.
*10 For each reduction of 0.01 per cent below the specified maximum carbon content, an increase of 0.05
per cent manganese above the specified maximum is permissible.
*11 For seamless pipe of grades X65 and X70, the chemical composition shall be agreed upon between the
purchaser and manufacturer.
*12 For each reduction of 0.01% below the specified maximum carbon content, an increase of 0.05%
manganese above the specified maximum is permissible, up to a maximum of 1.50%
*13 For cold-expanded seamless pipe in size 20 in., and larger, the maximum carbon content shall be 0.28
per cent.
32
TOLERANCES (Excerpts From API Specifications) (Continued)
Tensile Yield
Material Strength Strength Elongation C Si Mn P S Mo Cr Ni Div
N/mm2 (Min.) % min. % % % % max. % max. % % % %
A53-Grade A min. 330 205 Variable max. 0.25 - max. 0.95 0.050 0.80
A53-Grade B min. 415 240 Variable max. 0.03 - max. 1.20 0.050 0.60
A106-Grade A min. 330 205 35 max. 0.25 min. 0.10 0.27-0.93 0.048 0.058
A106-Grade B min. 415 240 30 max. 0.30 min. 0.10 0.29-1.06 0.048 0.058
A179 Hardness Rb. max. 72 0.06-0.18 - 0.27-0.63 0.048 0.058
A335-Grade P1 min. 379 207 30 0.10-0.20 0.10-0.50 0.30-0.80 0.045 0.045 0.44-0.65
A335-Grade P5 min. 414 207 30 max. 0.15 max. 0.50 0.30-0.60 0.030 0.030 0.44-0.55 4.00-6.00
A335-Grade P11 min. 414 207 30 max. 0.15 0.50-1.00 0.30-0.60 0.030 0.030 0.44-0.65 1.00-1.50
A335-Grade P12 min. 414 207 30 max. 0.15 max. 0.50 0.30-0.60 0.045 0.045 0.44-0.65 0.80-1.25
A335-Grade P22 min. 414 207 30 max. 0.15 max. 0.50 0.30-0.60 0.030 0.030 0.87-1.13 1.90-2.60
API-5L-Grade A min. 331 207 Variable max. 0.22 - max. 0.90 0.040 0.050
API-5L-Grade B min. 413 241 Variable max. 0.27 - max. 1.15 0.040 0.050
API-5L-Grade X42 min. 413 289 Variable max. 0.29 - max. 1.25 0.040 0.050
API-5L-Grade X46 min. 434 317 Variable max. 0.29 - max. 1.35 0.040 0.050
API-5L-Grade X52 min. 455 358 Variable max. 0.31 - max. 1.35 0.040 0.050
API-5L-Grade X56 min. 489 386 Variable max. 0.26 - max. 1.35 0.040 0.050
API-5L-Grade X60 min. 517 413 Variable max. 0.26 - max. 1.35 0.040 0.050
BS3603-410 410-530 235 22 max. 0.20 max. 0.35 0.60-1.20 0.045 0.045
BS3603-503 440-590 245 16 max. 0.15 0.15-0.35 0.30-0.80 0.025 0.020 3.25-3.75
BS3604-620 440-590 290 22 0.10-0.18 0.10-0.35 0.40-0.70 0.050 0.050 0.45-0.65 0.70-1.10
BS3604-622 440-640 275 20 0.08-0.15 max. 0.50 0.40-0.70 0.040 0.040 0.90-1.20 2.00-2.50
BS3604-625 450-600 170 20 max. 0.15 max. 0.50 0.30-0.60 0.040 0.040 0.45-0.65 4.00-6.00
BS4360-50D 490-640 355 20 max. 0.20 max. 0.40 max. 1.40 0.040 0.040 Nb 0.003-0.10
V0.0003-0.1
33
TOLERANCES (Excerpts From API Specifications) (Continued)
Euro
Specification Dimensional
Material Standard Standard ASTM API BS DIN Standard DIV
EU25-72
API-5L API-5L API-5L A53 Gr.A 3601-320/360 St. 37.0 Fe 310 St. E 210.7
API-5L API-5L API-5L A53 Gr.B 3061-410-4360-43B/C St. 44.0 Fe 360B/430B St. E 240.7
BS3059 Part 1 BS3059 Part 1 BS3059 Part 1 A179 St. 35.8/St. 37.8
BS3059 Part 2 BS3059 Part 2 BS3059 Part 2 A179 St. 35.8/St. 37.8
BS3601 BS3601 BS1600/BS3600 A53 Gr.A 5L-Gr.A St. 33 Fe 310
BS3601 BS3601 BS1600/BS3600 A53 Gr.B 5L-Gr.B St. 37.0/St. 37.2 Fe 360B A672-B60
BS3601 BS3601 BS1600/BS3600 A53 Gr.B 5L-Gr.B 4360-43 B/C St. 44.0/St. 44.3 Fe 430B/C A672-B65/C65
BS3601 BS3601 BS1600/BS3600 A106 Gr.B 5L-Gr.B St. 37.0/St. 37.2 Fe 430B
BS3601 BS3601 BS1600/BS3600 A106 Gr.B 5L-Gr.B St. 44.0/St. 44.3
BS3602 Part 1 BS3602 Part 1 BS1600/BS3600 A106 Gr.B 5L-Gr.B St. 35.8/St. 37.8
BS3602 Part 1 BS3602 Part 1 BS1600/BS3600 A106 Gr.B 5L-Gr.B St. 45.8
BS3602 Part 1 BS3602 Part 1 BS1600/BS3600 5L-Gr.X52 4360-50 B/C/D St. 52/St52.3 Fe 510 B/C/D
BS3602 Part 2 BS3602 Part 2 BS1600/BS3600 A672 B65/C65 5L-Gr.B 4360-43 B/C St. E240.7 Fe 430 B/C
BS4360 BS4360 BS1600 A671 CC70 5L-X52 St. 52-3 Fe 510D St. E 555
34
API PIPES
36
API PIPES (Continued)
37
API PIPES (Continued)
38
API PIPES (Continued)
39
API PIPES (Continued)
40
API PIPES (Continued)
41
API PIPES (Continued)
42
API PIPES (Continued)
43
PRODUCT SPECIFICATIONS
(Structural Steel and Sheet Pile)
Mechanical Properties
Type Yield Point Yield Ratio Elongation Impact
of Classifications N/mm2 (min.) Tensile % (max) % (min) Thickness t >12
Product Strength
Thickness Thickness Thickness Temp Energy
N/mm2 °C J (min)
t 16 16 t 40 t 12 t 5 5<t15 t > 16
JIS G 3101 SS400 245 235 400-510 - 21 17 21 - -
: 2004A SS490 285 275 490-610 - 19 15 19 - -
SS540 400 390 540 min - 16 13 17 - -
SM400 A 245 235 400-510 - 23 18 22 - -
SM400 B 245 235 400-510 - 23 18 22 0 27
JIS G 3106 SM490 A 325 315 490-610 - 22 17 21 - -
: 2004 SM490 B 325 315 490-610 - 22 17 21 0 27
SM490 YA 365 355 490-610 - 19 15 19 - -
SM490 YB 365 355 490-610 - 19 15 19 0 27
SM520 B 365 355 520-640 - 19 15 19 0 27
SM520 C 365 355 520-640 - 19 15 19 0 47
SN400 A 235 235 400-510 - 17 17 21 - -
Structural JIS G 3136 SN400 B 235-355B 235 400-510 80° 18 18 22 0 27
Steel : 2005 SN490 B 325-445B 235-355 490-610 80c 17 17 21 0 27
43A 275 325-445 430-580 - 20 - -
43B 275 265 430-580 - 20 20 27G
43C 275 265 430-580 - 20 0 27
BS 4360 43D 275 265 430-580 - 20 -20 27
: 1986 50A 355 345 490-640 - 18 - -
50B 355 345 490-640 - 18 20 27G
50C 355 345 490-640 - 18 0 27
50D 355 345 490-640 - 18 -20 27
S275JR 275 265 410-560 - 23 20 27G
S275JO 275 265 410-560 - 23 0 27
S275J2 275 265 410-560 - 23 -20 27
BS EN 10025 S275J2G3E 275 265 410-560 - 23 -20 27
: 1993/2004 S355JR 355 345 490F-630 - 22 20 27G
S355JO 355 345 490F-630 - 22 0 27
S355J2 355 345 490F-630 - 22 20 27
S355J2G3E 355 345 470-630 - 22 20 27
A36 250 400-550 - 20 - -
ASTM : 2003 A 572 Gr.42 290 415 min - 20 - -
A 572 Gr.50 345 450 minD - 18 - -
A 992 345-450 450 min 85 18 - -
St-33 185 175 290 - 16 - -
DIN 17100 St 37-2 235 225 340-470 - 24 - -
St 44-2 275 265 410-540 - 20 - -
St 50-2 295 285 470-610 - 18 - -
St 50-3 355 345 490-630 - 20 - -
t<12 12<t40
250 260 250 410 min - 22 - -
AS/NZS 250L0 260 250 410 min - 22 - -
3679.1 : 1996 350 360 340 480 min - 20 - -
350L0 360 340 480 min - 20 - -
t <11 11 t 40 t <17
300 320 300 280 440 min - 22 - -
300L0 320 300 280 440 min - 22 - -
Sheet Pile JIS A 5528 SY295 295 490 min - 17 - -
: 2000 SY390 390 540 min - 15 - -
Remark
A : Bend test on material grades SS400, SS490, SS540.
B : For the H section, when the t1 is 9 mm or less, the upper limit of the yield point or proof stress shall not be applied.
C : For the H section, when the t1 is 9 mm or less, the upper limit of the yield ratio shall be 85%.
D : For grades 50 steel of thickness 20 mm and under, the tensile strength shall be a minimum of 485 N/mm2.
E : Only in 1993 version.
F : For 2004 version, the specified tensile strength is 470-630 N/mm2.
G : Verified only when specified at the time of the order.
44
PRODUCT SPECIFICATIONS
(Structural Steel and Sheet Pile)
Remark
A : It is promissible to vary the carbon and manganese contents (ladle analysis) for grades 50B, 50C, and 50D on the basis of an increase of 0.06%
manganese content for each decrease of 0.01% carbon, or vice versa up to maximum manganese content of 1.6% and maximum carbon content of
0.22% for grades 50B and 50C and 0.20% for grade 50D.
B : A maximum of manganese of 1.50% is permissible, with an associated reduction of the carbon maximum of 0.03%.
C : Nitrogen control excluded.
D : Additional chemical composition contro grade A992 : Ni (max.) = 0.45, Co (max.) = 0.05, Cr (max.) = 0.35, Cu (max.) = 0.60, Mo (max.) = 0.15, Co
+V (max.) = 0.15, and Mn/S (min.) = 20, Mn/S (min.) = 20.
E : Carbon Equivalent : (JIS Standard) CE = C + Mn/6 + Si/24 + Ni/40 + Cr/5 + Mo/4 + V/14 (AS, ASTM Standard) CE = C + Mn/6 + (Cr + Mo + V)/5 +
(Ni + Cu)/15.
F : Chemical Composition on sensitivity of welding crack =C + SI/30 + Mn/20 + Cu/20 + Ni/60 + Cr/20 + Mo/15 + V/10 + 5B.
G : Only in 1993 version.
H : For 2004 version, Cu (max.) = 0.55%
45
UNIVERSAL BEAMS AND COLUMNS
Y
R
tw tf
X X D
IMPERIAL UNITS B
Y
46
UNIVERSAL BEAMS AND COLUMNS (Continued)
Y
R
tw tf
X X D
B
Y
47
UNIVERSAL BEAMS AND COLUMNS (Continued)
Y
R
tw tf
X X D
B
IMPERIAL UNITS Y
48
UNIVERSAL BEAMS AND COLUMNS (Continued)
Y
R
tw tf
X X D
B
Y
49
UNIVERSAL BEAMS AND COLUMNS (Continued)
Y
R
tw tf
X X D
B
IMPERIAL UNITS Y
50
UNIVERSAL BEAMS AND COLUMNS (Continued)
Y
R
tw tf
X X D
B
Y
51
UNIVERSAL BEAMS AND COLUMNS (Continued)
Y
R
tw tf
X X D
B
IMPERIAL UNITS Y
52
UNIVERSAL BEAMS AND COLUMNS (Continued)
Y
R
tw tf
X X D
B
Y
53
UNIVERSAL BEAMS AND COLUMNS (Continued)
Y
R
tw tf
X X D
B
IMPERIAL UNITS Y
54
UNIVERSAL BEAMS AND COLUMNS (Continued)
Y
R
tw tf
X X D
B
Y
55
UNIVERSAL BEARING PILES
B
IMPERIAL DIMENSIONS T
No imperial equivalent
No imperial equivalent
No imperial equivalent
No imperial equivalent
56
UNIVERSAL BEARING PILES (Continued)
B
57
UNIVERSAL BEAMS AND COLUMNS
Y
R
tw tf
X X D
METRIC UNITS B
Y
Section Unit Section Flange Thickness Corner Section Moment Radius Modulus
Size Weight depth width radius area of inertia of gyration of section
W D B tw tf r A lx ly lx ly Zx Zy
2 4
mm kg/m mm mm mm mm mm cm cm cm4 cm cm cm3 cm3
100 x 50 9.30 100 50 5.0 7.0 8 11.85 187 14.8 3.98 1.12 37.5 5.91
100 x 100 14.8 100 100 5.0 7.0 10 19.20 344 117.0 4.20 2.47 69.0 23.00
16.9 100 100 8.0 6.0 8 21.60 378 134.0 4.18 2.49 75.6 26.70
17.2 100 100 6.0 8.0 10 21.90 333 134.0 4.18 2.47 76.5 26.70
125 x 60 13.2 125 60 6.0 8.0 9 16.84 413 29.2 4.95 1.32 66.1 9.73
125 x 125 23.6 125 125 6.5 9.0 8 30.00 840 293.0 5.29 3.13 134.0 46.90
28.3 125 125 6.5 9.0 10 30.31 847 293.0 5.29 3.11 136.0 47.00
150 x 75 14.0 150 75 5.0 7.0 8 17.85 666 49.5 6.11 1.66 88.8 13.20
150 x 100 20.7 148 100 6.0 9.0 8 26.30 1,003 150.0 6.17 2.39 135.0 30.10
21.1 148 100 6.0 9.0 11 26.84 1,020 151.0 6.17 2.37 138.0 30.10
150 x 150 31.1 150 150 7.0 10.0 8 39.60 1,623 563.0 6.40 3.77 216.0 75.10
31.5 150 150 7.0 10.0 11 40.14 1,640 563.0 6.39 3.75 219.0 75.10
37.4 154 151 8.0 12.0 11 47.70 2,018 690.0 6.51 3.80 262.0 91.40
175 x 90 18.0 175 90 5.0 8.0 8 22.90 1,205 97.5 7.26 2.06 138.0 21.70
18.1 175 90 5.0 8.0 9 23.04 1,210 97.5 7.26 2.06 139.0 21.70
175 x 125 23.3 169 125 5.5 8.0 12 29.65 1,530 261.0 7.18 2.97 181.0 41.80
175 x 175 32.8 171 174 6.0 9.0 12 41.70 2,304 791.0 7.43 4.35 269.0 90.90
40.2 175 175 7.5 11.0 13 51.20 2,880 984.0 7.50 4.38 330.0 112.00
40.4 175 175 7.5 11.0 12 51.40 2,895 984.0 7.50 4.37 331.0 112.00
200 x 100 17.8 198 99 4.5 7.0 8 22.70 1,543 113.0 8.25 2.24 156.0 22.90
18.2 198 99 7.0 4.5 11 23.20 1,582 114.0 8.26 2.22 160.0 23.00
20.9 200 100 5.5 8.0 8 26.70 1,806 134.0 8.23 2.24 181.0 26.70
21.3 200 100 5.5 8.0 11 27.16 1,840 134.0 8.24 2.22 184.0 26.80
200 x 150 29.9 194 150 6.0 9.0 8 38.10 2,625 507.0 8.30 3.65 271.0 67.60
30.6 194 150 6.0 9.0 13 39.01 2,690 507.0 8.30 3.61 277.0 67.60
36.9 198 151 7.0 11.0 13 47.00 3,331 633.0 8.42 3.67 336.0 83.80
200 x 200 41.4 196 199 6.5 10.0 13 52.70 3,846 1,315.0 8.54 5.00 392.0 132.00
49.9 200 200 8.0 12.0 13 63.53 4,720 1,600.0 8.62 5.02 472.0 160.00
56.2 200 204 12.0 12.0 13 71.53 4,980 1,700.0 8.35 4.88 498.0 167.00
57.8 204 201 9.0 14.0 13 73.60 5,603 1,897.0 5.70 5.08 549.0 189.00
65.7 208 202 16.0 10.0 13 83.69 6,530 2,200.0 8.83 5.13 628.0 218.00
250 x 125 25.1 248 124 5.0 8.0 8 32.00 3,450 255.0 10.40 2.82 278.0 41.10
25.7 248 124 5.0 8.0 12 32.68 3,540 255.0 10.40 2.79 285.0 41.10
29.0 250 125 6.0 9.0 8 37.00 3,965 294.0 10.40 2.82 317.0 47.00
29.6 250 125 6.0 9.0 12 37.66 4,050 294.0 10.40 2.79 324.0 47.00
250 x 175 43.6 244 175 7.0 11.0 13 55.50 6,037 984.0 10.40 4.21 495.0 112.00
44.1 244 175 7.0 11.0 16 56.24 6,120 985.0 10.40 4.19 502.0 113.00
51.6 248 176 8.0 13.0 16 65.70 7,308 1,184.0 10.50 4.24 589.0 135.00
59.1 252 177 9.0 15.0 16 75.30 8,541 1,390.0 10.70 4.30 678.0 157.00
58
UNIVERSAL BEAMS AND COLUMNS (Continued)
Y
R
tw tf
X X D
METRIC UNITS B
Y
Section Unit Section Flange Thickness Corner Section Moment Radius Modulus
Size Weight depth width radius area of inertia of gyration of section
W D B tw tf r A lx ly lx ly Zx Zy
mm kg/m mm mm mm mm mm cm2 cm4 cm4 cm cm cm3 cm3
250 x 250 64.4 244 252 11.0 11 16 82.06 8,780 2,940 10.3 5.98 720 233.0
66.5 248 249 8.0 13 16 84.70 9,930 3,350 10.8 6.29 801 269.0
71.8 250 250 9.0 14 13 91.40 10,750 3,648 10.8 6.32 860 292.0
72.4 250 250 9.0 14 16 92.18 10,800 3,650 10.8 6.29 867 292.0
82.8 250 255 14.0 14 16 104.70 11,500 3,880 10.5 6.09 919 304.0
98.1 260 253 12.0 19 16 125.00 15,340 5,134 11.1 6.41 1,180 406.0
300 x 150 25.0 294 148 4.5 6 16 32.60 4,940 326 12.3 3.16 336 44.0
32.0 298 149 5.5 8 13 40.80 6,320 442 12.4 3.29 424 59.3
36.7 300 150 6.5 9 13 46.78 7,210 508 12.4 3.29 481 67.7
41.4 304 150 6.5 11 13 52.80 8,578 620 12.7 3.43 564 82.7
46.2 306 151 7.5 12 13 58.80 9,514 691 12.7 3.43 622 91.5
69.0 318 154 11.0 18 13 87.90 14,820 1,100 13.0 3.54 932 143.0
300 x 200 48.3 290 199 7.0 10 18 61.50 9,431 1,317 12.4 4.63 650 132.0
55.8 294 200 8.0 12 13 71.10 11,110 1,602 12.5 4.75 756 160.0
56.8 294 200 8.0 12 18 72.38 11,300 1,600 12.5 4.71 771 160.0
65.4 298 201 9.0 14 18 83.36 13,300 1,900 12.6 4.77 893 189.0
77.3 304 202 10.0 17 18 98.50 16,280 2,341 12.9 4.88 1,071 232.0
300 x 300 84.5 294 302 12.0 12 18 107.70 16,900 5,520 12.5 7.16 1,150 365.0
87.0 298 299 9.0 14 18 110.80 18,800 6750 13.1 7.51 1,270 450.0
93.0 300 300 10.0 15 13 118.00 20,190 6,753 13.1 7.55 1,346 450.0
94.0 300 300 10.0 15 18 119.80 20,400 6,750 13.1 7.51 1,360 450.0
105.0 300 305 15.0 15 13 133.50 21,311 7,102 12.6 7.26 1,421 466.0
106.0 304 301 11.0 17 18 134.80 23,400 7,730 13.2 7.57 1,540 514.0
125.0 310 303 20.0 13 18 159.00 28,130 9,282 13.3 7.64 1,815 613.0
130.0 310 305 15.0 20 18 165.00 28,630 9,470 13.2 7.57 1,847 621.0
147.0 312 310 20.0 21 18 187.00 31,370 10,450 13.0 7.48 2,011 674.0
350 x 175 41.2 346 174 6.0 9 13 52.50 11,040 792 14.5 3.88 638 91.0
41.4 346 174 6.0 9 14 52.68 11,100 798 14.5 3.88 641 91.0
49.4 350 175 7.0 11 13 62.90 13,500 984 14.6 3.96 771 113.0
49.6 350 175 7.0 11 14 63.14 13,600 984 14.7 3.95 775 112.0
57.8 354 176 8.0 13 14 73.70 16,100 1,184 14.8 4.01 909 135.0
66.2 358 177 9.0 15 14 84.30 18,710 1,390 14.9 4.06 1,045 157.0
71.8 360 178 10.0 16 14 91.40 20,240 1,508 14.9 4.06 1,124 169.0
79.7 364 177 11.0 18 14 101.00 22,760 1,669 15.0 4.06 1,250 189.0
350 x 250 69.2 336 249 8.0 12 20 88.15 18,500 3,090 14.5 5.92 1,100 248.0
78.1 340 250 9.0 14 13 100.00 21,230 3,649 14.6 6.05 1,249 292.0
79.7 340 240 9.0 14 20 102.00 21,700 3,650 14.6 6.00 1,280 292.0
94.2 346 251 10.0 17 20 120.00 26,440 4,488 14.8 6.12 1,528 358.0
108.0 350 253 12.0 19 20 137.00 30,190 5,138 14.8 6.12 1,725 406.0
59
UNIVERSAL BEAMS AND COLUMNS (Continued)
Y
R
tw tf
X X D
METRIC UNITS B
Y
Section Unit Section Flange Thickness Corner Section Moment Radius Modulus
Size Weight depth width radius area of inertia of gyration of section
W D B tw tf r A lx ly lx ly Zx Zy
2 4
mm kg/m mm mm mm mm mm cm cm cm4 cm cm cm3 cm3
350 x 350 106.0 338 351 13 13 20 135.30 28,200 9,380 14.4 8.33 1,670 534
113.0 344 348 10 16 13 144.00 23,850 11,240 15.1 8.84 1,910 646
115.0 344 348 10 16 20 146.00 33,810 11,840 15.1 8.95 1,966 646
131.0 344 354 16 16 20 166.60 35,300 11,800 14.6 8.43 2,050 669
135.0 350 350 12 19 13 172.00 39,847 11,840 15.2 8.89 2,277 776
137.0 350 350 12 19 20 173.90 40,300 13,583 15.2 8.84 2,303 776
156.0 350 357 19 19 20 198.40 42,500 14,400 14.7 8.53 2,450 809
159.0 356 352 14 22 20 202.00 47,600 16,000 15.3 8.90 2,674 909
181.0 362 354 16 25 20 230.00 55,190 18,500 15.5 8.96 3,049 1,045
400 x 200 56.1 396 199 7 11 13 71.40 19,770 1,447 16.6 4.50 999 145
56.5 396 199 7 11 16 72.16 20,020 1,450 16.7 4.48 1,011 145
65.4 400 200 13 8 13 83.40 23,460 1,736 16.8 4.56 1,173 174
66.0 400 200 13 8 16 84.12 23,710 1,740 16.8 4.54 1,185 174
75.5 404 201 9 15 16 96.20 27,490 2,035 16.9 4.60 1,361 202
88.2 410 202 10 18 16 112.00 33,060 2,478 17.2 4.70 1,612 245
140.0 430 208 16 28 16 179.00 54,850 4,216 17.5 4.86 2,551 405
400 x 300 94.3 386 299 9 14 22 120.10 33,700 6,240 16.7 7.21 1,740 418
105.0 390 300 10 16 13 133.00 37,860 7,204 16.9 7.35 1,942 480
107.0 390 300 10 16 22 136.00 38,680 7,210 16.9 7.28 1,983 481
127.0 896 302 12 19 22 162.00 46,660 8,735 17.0 7.35 2,357 578
400 x 400 140.0 388 402 15 15 22 178.50 48,930 16,260 16.6 9.55 2,524 809
147.0 394 398 11 18 22 186.80 56,150 18,930 17.3 10.10 2,850 951
168.0 394 405 18 18 22 214.40 49,700 20,000 16.7 9.65 3,030 985
172.0 400 400 13 21 22 218.70 66,620 22,420 17.5 10.10 3,331 1,120
197.0 400 408 21 21 22 250.70 70,900 23,800 16.8 9.75 3,540 1,170
200.0 406 403 16 24 22 254.90 78,040 26,200 17.5 10.10 3,844 1,300
232.0 414 405 18 28 22 295.50 92,770 31,030 17.7 10.20 4,482 1,532
283.0 428 407 20 35 22 360.70 119,000 39,360 18.2 10.40 5,570 1,934
415.0 458 417 30 50 22 528.60 187,100 60,530 18.8 10.70 8,172 2,903
605.0 598 432 45 70 22 770.10 297,900 94,360 19.7 11.10 12,000 4,370
450 x 200 65.1 446 199 8 12 13 83.00 28,130 1,579 18.4 4.36 1,262 159
66.2 446 199 8 12 18 84.30 28,700 1,580 18.5 4.33 1,287 159
74.9 450 200 9 14 13 95.40 32,890 1,870 18.6 4.43 1,462 187
76.0 450 200 9 14 18 96.76 33,500 1,872 18.6 4.40 1,487 187
88.9 456 201 10 17 18 113.00 40,400 2,308 18.9 4.51 1,772 230
98.9 460 202 11 19 18 126.00 45,430 2,619 19.0 4.56 1,975 259
110.0 460 205 14 19 18 140.00 47,860 2,742 18.5 4.43 2,081 268
450 x 300 106.0 434 299 10 15 24 135.00 46,800 6,690 18.6 7.04 2,160 448
121.0 440 300 11 18 13 154.00 54,730 8,106 18.9 7.26 2,488 540
124.0 440 300 11 18 24 157.40 56,100 8,110 18.9 7.18 2,550 541
145.0 446 302 13 21 24 184.00 66,380 9,658 19.0 7.24 2,977 640
60
UNIVERSAL BEAMS AND COLUMNS (Continued)
Y
R
tw tf
X X D
METRIC UNITS B
Y
Section Unit Section Flange Thickness Corner Section Moment Radius Modulus
Size Weight depth width radius area of inertia of gyration of section
W D B tw tf r A lx ly lx ly Zx Zy
mm kg/m mm mm mm mm mm cm2 cm4 cm4 cm cm cm3 cm3
500 x 200 77.9 496 199 9 14 13 99.0 40,840 1,843 20.3 4.31 1,647 185
79.5 496 199 9 14 20 101.3 41,900 1,846 20.3 4.27 1,690 186
88.2 500 200 10 16 13 112.0 46,810 2,138 20.4 4.36 1,872 214
89.6 500 200 10 16 20 114.2 47,800 2,142 20.5 4.33 1,917 214
102 506 201 11 19 13 129.0 55,480 2,578 20.7 4.47 2,193 257
103 506 201 11 19 20 131.3 56,520 2,582 20.7 4.43 2,234 257
117 512 202 12 22 20 148.0 65,450 3,035 21.0 4.52 2,557 300
500 x 300 111 482 300 11 15 13 141.0 58,270 6,756 20.3 6.92 2,418 450
114 482 300 11 15 26 145.5 60,400 6,768 20.4 6.82 2,505 451
125 488 300 11 18 13 159.0 68,860 8,106 20.8 7.14 2,822 540
128 488 300 11 18 26 163.5 71,000 8,118 20.8 7.05 2,910 541
150 494 302 13 21 26 191.0 83,810 9,663 20.9 7.11 3,393 640
600 x 200 79.0 592 197 8 13 22 101.0 58,240 1,665 24.1 4.07 1,968 169
92.6 596 199 10 15 13 118.0 66,640 1,976 23.8 4.10 2,236 199
94.6 596 199 10 15 22 120.5 68,720 1,982 23.9 4.05 2,310 199
103 600 200 11 17 13 132.0 75,560 2,274 24.0 4.16 2,519 227
106 600 200 11 17 22 134.4 77,630 2,280 24.0 4.12 2,588 228
118 606 201 12 20 13 150.0 88,320 2,716 24.3 4.26 2,915 270
120 606 201 12 20 22 152.5 90,400 2,723 24.3 4.23 2,983 271
134 612 202 13 23 22 171.7 103,500 3,180 24.6 4.32 3,382 315
600 x 300 133 582 300 12 17 13 169.0 98,950 7,659 24.2 6.73 3,400 511
137 582 300 12 17 28 174.5 102,700 7,675 24.3 6.63 3,530 512
147 588 300 12 20 13 187.0 114,400 9,009 24.7 6.94 3,889 601
151 588 300 12 20 28 192.5 118,100 9,025 24.8 6.85 4,020 602
170 594 302 14 23 13 217.0 133,650 10,570 24.8 6.98 4,497 700
175 594 302 14 23 28 222.4 137,300 10,590 24.9 6.90 4,624 701
203 602 304 16 27 28 259.0 162,600 12,680 25.1 7.00 5,401 834
217 608 304 16 30 28 277.0 179,300 14,090 25.4 7.13 5,896 927
700 x 300 166 692 300 13 20 28 211.5 172,400 9,030 28.6 6.53 4,980 602
182 700 300 13 24 18 232.0 197,500 10,820 29.2 6.83 5,643 721
185 700 300 13 24 28 235.5 201,500 10,830 29.3 6.78 5,760 722
215 708 302 15 28 28 273.6 237,100 12,900 29.5 6.86 6,700 854
800 x 300 191 792 300 14 22 28 243.4 254,000 9,936 23.3 6.39 6,410 662
207 800 300 14 26 18 264.0 286,400 11,720 33.0 6.67 7,159 781
210 800 300 14 26 28 267.4 291,700 11,740 33.0 6.62 7,292 782
241 808 302 16 30 28 307.6 339,200 13,820 33.2 6.70 8,400 915
267 816 303 17 34 28 340.0 383,600 15,820 33.6 6.82 9,402 1,044
900 x 300 210 890 299 15 23 18 267.0 338,500 10,280 35.6 6.20 7,608 687
213 890 299 15 23 28 270.9 345,300 10,290 35.7 6.16 7,760 688
240 900 300 16 28 18 306.0 404,500 12,630 36.4 6.43 8,989 842
243 900 300 16 28 28 309.8 411,300 12,650 36.4 6.39 9,140 843
283 912 302 18 34 18 360.0 491,000 15,660 36.9 6.59 10,770 1,037
286 912 302 18 34 28 364.0 497,800 15,670 37.0 6.56 10,920 1,038
304 918 303 19 37 18 387.0 535,400 17,210 37.2 6.67 11,660 1,136
307 918 303 19 37 28 391.0 542,200 17,230 37.2 6.63 11,810 1,137
61
STEEL SHEET PILE
Steel Grades
Standard Designation: Other steel grades comparable properties been supplied in compliance
NF 35.520 (FRANCE) with the specifications and recommendations of the following standards
Circulaire 590.2 (BELGIUM)
Grade Minimum Minimum Minimum Bend test Euronorm USA Canada G.B. G.F.R. Japan
yield tensile elongation 180°
point strength Lo-5.65 So CSA
N/mm² N/mm² % e < 16mm/
e > 16mm 25 - 72 ASTM G. 4021 BS 4360 EAU A. 5528
Steel Qualities
Ultimate Stress Minimum Yield Stress Minimum Elongation
on 200mm
BS.4360: 1986
(Mild Steel) 43.8/59.1 430/580 28.0 275 27.0 265 16 20
Grade 43A
BS.4360: 1986
(High yield Steel) 49.9/65.2 490/640 36.2 355 35.2 345 15 18
Grade 50A
Notes:
For guidance only.
Stresses in temporary conditions occurring during construction may be varied at the discretion of client’s engineer.
62
STEEL SHEET PILE (Continued)
1) Grades Of Steel
Chemical composition and mechanical properties
SY390 - - - 0.040 0.040 0.25 - - - 539 min 392 min. JIS 15 min
max. max. min. No. 1A
CR4C490 0.20 0.55 1.20 0.070 0.040 0.20 0.65 0.30 0.15 JIS
max. max. max. - max. min. max. - max. No. 1A 17 min.
0.15 0.80
2) Dimensional Tolerances
Height ± 4%
+ 10
Width (B) -5
t < 10 ± 1.0
Thickness 10 t < 16 ± 1.2
t 16 ± 1.5
Length (L) + Not Specified
0
L 10m. Full Length (M) x 0.12% max.
Deflection
L > 10m. Full Length - 10m. x 0.10% + 12mm. max
L 10m. Full Length (M) x 0.25% max.
Camber
L 10m. Full Length - 10m. x 0.20% + 20mm. max
Difference in vertically Cut Sections. Within 4 % of Width
Note: The deflection shall be in the direction parallel to the sheet pile wall and the camber shall be in the direction vertical to the sheet pile wall.
63
STEEL SHEET PILES - U TYPE
YSP FSP
t t
c c
Xo h Xo Xo h Xo
X X X X
w w
YSP I 400 15.7 75 2.95 8.0 0.315 46.49 7.206 116.2 4.589 1.15 3.77 1.44 1.44
YSP U-5 400 15.7 80 3.15 7.6 0.299 45.21 7.008 113.0 5.338 1.17 3.84 1.47 1.47
FSP IA 400 15.7 85 3.35 8.0 0.315 45.21 7.008 113.0 5.338 1.21 3.97 1.51 1.51
YSP II 400 15.7 100 3.94 10.5 0.413 61.18 9.483 153.0 7.228 1.24 4.07 1.55 1.55
FSP II 400 15.7 100 3.94 10.5 0.413 61.18 9.483 153.0 7.228 1.33 4.36 1.66 1.66
YSP U-9 400 15.7 110 4.33 9.3 0.366 55.01 8.527 137.5 6.496 1.29 4.23 1.61 1.61
FSP IIA 400 15.7 120 4.72 9.2 0.362 55.01 8.527 137.5 6.496 1.34 4.40 1.68 1.68
YSP III 400 15.7 125 4.92 13.0 0.512 76.42 11.850 191.0 9.022 1.33 4.36 1.66 1.66
FSP III 400 15.7 125 4.92 13.0 0.512 76.42 11.850 191.0 9.022 1.44 4.72 1.80 1.80
YSP U-15 400 15.7 150 5.91 12.2 0.480 74.40 11.530 186.0 8.788 1.43 4.69 1.78 1.78
FSP IIIA 400 15.7 150 5.91 13.1 0.516 74.40 11.530 186.0 8.788 1.44 4.72 1.80 1.80
YSP IV 400 15.7 155 6.10 15.5 0.610 96.99 15.030 242.5 11.460 1.47 4.82 1.84 1.84
FSP IV 400 15.7 170 6.69 15.5 0.610 96.99 15.030 242.5 11.460 1.61 5.28 2.01 2.01
YSP U-23 400 15.7 175 6.89 14.7 0.579 94.21 14.600 235.5 11.120 1.56 5.12 1.94 1.94
FSP IVA 400 15.7 185 7.28 16.1 0.634 94.21 14.600 235.1 11.110 1.57 5.15 1.96 1.96
YSP V 420 16.5 175 6.89 22.0 0.866 134.00 20.770 319.0 15.070 1.59 5.22 1.99 1.99
FSP VL 500 19.7 200 7.87 24.3 0.957 133.80 20.740 267.6 12.640 1.75 5.74 1.75 1.75
FSP VIL 500 19.7 225 8.86 27.6 1.090 153.00 23.720 306.0 14.460 1.83 6.00 1.83 1.83
64
STEEL SHEET PILES - U TYPE (Continued)
YSP FSP
t t
h h
X X X X
W W
C per pile per wall per pile per wall per pile per pile per wall
Width Width Width
cm in kg/m lbs/ft kg/m2 lbs/ft2 cm4 in cm4/m in4/ft cm in cm3 in3 cm3/m in3/ft
2.64 1.04 36.5 24.5 91.2 18.7 429 10.3 3,820 28.0 3.04 1.20 66.4 4.05 509 9.47
2.78 1.09 35.5 23.9 88.8 18.2 454 10.9 4,220 30.9 3.17 1.25 64.7 3.95 527 9.80
3.45 1.36 35.5 23.9 88.8 18.2 598 14.4 4,500 33.0 3.64 1.43 88.0 5.37 529 9.84
3.62 1.43 48.0 32.3 120.0 24.6 986 23.7 8,690 63.6 4.01 1.58 121.0 7.38 869 16.20
4.04 1.59 48.0 32.3 120.0 24.6 1,240 29.8 8,740 64.0 4.50 1.77 152.0 9.28 874 16.30
3.86 1.52 43.2 29.0 108.0 22.1 1,070 25.7 9,680 70.9 4.42 1.74 120.0 7.32 880 16.40
4.72 1.86 43.2 29.0 108.0 22.1 1,460 35.1 10,600 77.6 5.15 2.03 160.0 9.76 880 16.40
4.72 1.86 60.0 40.3 150.0 30.7 1,920 46.1 16,400 120.0 5.01 1.97 196.0 12.00 1,310 24.40
4.90 1.93 60.0 40.3 150.0 30.7 2,220 53.3 16,800 123.0 5.39 2.12 223.0 13.60 1,340 24.90
5.71 2.25 58.4 39.2 146.0 29.9 2,700 64.9 22,800 167.0 5.12 2.02 238.0 14.50 1,520 28.30
5.84 2.30 58.4 39.2 146.0 29.9 2,790 67.0 22,800 167.0 6.12 2.41 250.0 15.30 1,520 28.30
5.85 2.30 76.0 51.1 190.0 38.9 2,690 88.7 31,900 234.0 6.15 2.42 311.0 19.00 2,060 38.30
6.45 2.54 76.1 51.1 190.0 38.9 4,670 112.0 38,600 283.0 6.94 2.73 362.0 22.10 2,270 42.20
6.51 2.56 74.0 49.7 185.0 37.9 4,380 105.0 39,400 389.0 6.81 2.68 330.0 20.10 2,250 41.80
7.45 2.93 74.0 49.7 185.0 37.9 5,300 127.0 41,600 305.0 7.50 2.95 400.0 24.40 2,250 41.80
6.15 2.42 105.0 70.6 250.0 51.2 5,950 143.0 55,200 404.0 6.67 2.63 433.0 26.40 3,150 58.60
6.94 2.73 105.0 70.6 210.0 43.0 7,960 191.0 63,000 461.0 7.71 3.04 520.0 31.70 3,150 58.60
8.09 3.18 120.0 80.6 240.0 49.2 11,400 271.0 86,000 630.0 8.63 3.40 680.0 41.50 3,820 71.10
65
STEEL SHEET PILES
Other available ranges :
13.4 t
10.3 t 210 h
180 h
130 h
66
MILD STEEL CHANNELS, FLATS, ANGLES AND
SQUARE BARS
67
CHANNELS
B
r1 r2
95û
A t
METRIC SERIES T
Size Dept (A) Flange Width Web (t) Flange (T) Corner Radius Sectional
(B) Thickness Thickness Area
AXBXt mm in mm in mm in mm cm mm in mm in cm in
380 x 100 x 10.5 380 14.961 100 3.937 10.5 0.431 16.0 0.630 18 0.709 9.0 0.354 69.390 10.760
380 x 100 x 13 380 14.961 100 3.937 13.0 0.512 6.5 0.650 18 0.709 9.0 0.354 78.960 12.540
300 x 90 x 9 300 11.811 90 3.543 9.0 0.354 12.0 0.512 14 0.551 7.0 0.276 48.570 7.531
300 x 90 x 10 300 11.811 90 3.543 10.0 0.394 15.5 0.611 19 0.748 9.5 0.354 55.740 8.640
280 x 100 x 9 280 11.024 100 3.937 9.0 0.354 13.0 0.512 14 0.551 7.0 0.276 49.370 7.652
280 x 100 x 11.5 280 11.024 100 3.937 11.5 0.453 16.0 0.630 18 0.709 9.0 0.354 61.370 9.512
250 x 80 x 8 250 9.843 80 3.150 8.0 0.315 12.5 0.492 14 0.551 7.0 0.276 38.510 5.969
250 x 90 x 9 250 9.843 90 3.543 9.0 0.354 13.0 0.512 14 0.551 7.0 0.276 44.070 6.831
250 x 90 x 11 250 9.843 90 3.543 11.0 0.433 14.5 0.571 17 0.669 8.5 0.335 51.170 7.931
230 x 80 x 8 230 9.055 80 3.150 8.0 0.315 12.0 0.472 13 0.512 6.5 0.256 36.120 5.599
230 x 90 x 8.5 230 9.055 90 3.543 8.5 0.335 13.5 0.531 15 0.591 7.5 0.295 42.140 6.532
200 x 80 x 7.5 200 7.874 80 3.150 7.5 0.295 11.0 0.433 12 0.472 6.0 0.236 31.330 4.856
200 x 90 x 8 200 7.874 90 3.543 8.0 0.315 13.5 0.531 14 0.551 7.0 0.276 38.650 5.991
180 x 75 x 7 180 7.087 75 2.953 7.0 0.276 10.5 0.413 11 0.433 5.5 0.217 27.200 4.216
180 x 90 x 7.5 180 7.087 90 3.543 7.5 0.295 12.5 0.492 13 0.512 6.5 0.256 34.570 5.358
150 x 75 x 6.5 150 5.906 75 2.953 6.4 0.256 10.0 0.394 10 0.394 5.0 0.197 23.710 3.675
150 x 75 x 9 150 5.906 75 2.953 9.0 0.354 12.5 0.492 15 0.591 7.5 0.295 30.590 4.741
125 x 65 x 6 125 4.921 65 2.559 6.0 0.236 8.0 0.315 8 0.315 4.0 0.157 17.110 2.652
100 x 50 x 5 100 3.937 50 1.969 5.0 0.197 7.5 0.295 8 0.315 4.0 0.157 11.920 1.848
75 x 40 x 5 75 2.953 40 1.575 5.0 0.197 7.0 0.276 8 0.315 4.0 0.157 8.818 1.367
68
CHANNELS (Continued)
B
r1 r2
95û
A t
METRIC SERIES T
54.5 16.6 36.60 2.41 0.949 14500 348.4 557 13.38 14.5 5.709 2.83 1.114 782 46.50 73.3 4.473 380 x 100 x 10.5
62.0 18.9 41.66 2.29 0.902 15600 374.8 584 14.03 14.1 5.551 2.72 1.071 822 50.16 78.8 4.625 280 x 100 x 13
38.1 11.6 25.57 2.23 0.878 6440 154.7 325 7.808 11.5 4.528 2.59 1.020 429 26.18 48.0 2.929 300 x 90 x 9
43.8 13.3 29.32 2.33 0.917 7400 177.8 373 8.961 11.5 4.528 2.59 1.020 494 30.15 56.0 3.417 300 x 90 x 10
38.8 11.6 26.07 2.64 1.040 5930 142.5 428 10.28 11.0 4.331 2.95 1.161 423 25.81 58.2 3.552 280 x 100 x 9
48.2 14.7 32.39 2.68 1.055 7150 171.8 515 12.37 10.8 4.252 2.90 1.142 510 31.12 70.4 4.296 250 x 100 x 11.5
30.2 9.22 20.29 2.11 0.831 3630 87.21 210 5.045 9.71 3.823 2.34 0.921 291 17.76 35.7 2.179 250 x 80 x 8
34.6 10.5 23.15 2.42 0.953 4180 100.4 306 7.352 9.74 3.835 2.64 1.039 335 20.44 46.5 2.838 230 x 90 x 9
40.2 12.2 26.90 2.39 0.941 4690 112.7 342 8.217 9.57 3.768 2.58 1.016 375 22.88 51.7 3.155 250 x 90 x 11
28.4 8.64 19.06 2.15 0.846 2900 69.67 200 4.805 8.96 3.528 2.35 0.925 252 15.38 34.2 2.087 200 x 80 x 8
33.1 10.1 22.24 2.58 1.016 3490 83.85 303 7.280 9.10 3.583 2.68 1.055 304 18.55 47.3 2.886 230 x 90 x 8.5
24.6 7.50 16.53 2.24 0.884 1950 46.85 177 4.525 7.89 3.106 2.38 0.937 195 11.90 30.8 1.880 200 x 80 x 7.5
30.3 9.25 20.40 2.77 1.091 2490 59.82 286 6.872 8.03 3.161 2.72 1.071 249 15.19 45.9 2.801 200 x 90 x 8
21.4 6.51 14.36 2.15 0.846 1380 33.15 137 3.291 7.13 2.807 2.24 0.882 154 9.398 25.5 1.556 180 x 75 x 7
27.1 8.27 18.21 2.85 1.122 1840 44.21 258 6.198 7.29 2.870 2.73 1.075 204 12.45 42.0 2.563 180 x 90 x 7.5
18.6 5.67 12.50 2.31 0.909 864 20.75 122 2.931 6.04 2.378 2.27 0.894 115 7.018 23.6 1.440 150 x 75 x 6.5
24.0 7.32 16.13 2.31 0.909 1060 25.47 151 3.628 5.87 2.311 2.22 0.874 141 8.604 29.1 1.776 150 x 75 x 9
13.4 4.09 9.004 1.94 0.764 425 10.21 65.5 1.571 4.99 1.965 1.96 0.772 68.0 4.150 14.4 0.879 125 x 65 x 6
9.36 2.85 6.290 1.55 0.610 189 4.541 26.9 0.646 3.98 1.567 1.50 0.591 37.8 2.307 7.82 0.477 100 x 50 x 5
6.92 2.11 4.650 1.27 0.500 75.9 1.823 12.4 0.298 2.93 1.154 1.19 0.469 20.2 1.233 4.54 0.277 75 x 40 x 5
69
CHANNELS (Continued)
B
r1 r2
95û
A t
IMPERIAL SERIES T
381 x 102 55.10 381.0 101.6 10.4 16.3 2.52 15.2 4.8 312.6 6.23 30.0 14,894.0 579.70
305 x 102 46.18 304.8 101.6 10.2 14.8 2.66 15.2 4.8 239.3 6.86 23.5 8,214.0 499.50
305 x 89 41.69 304.8 88.9 10.2 13.7 2.18 13.7 3.2 245.4 6.49 24.1 7,061.0 325.40
254 x 89 35.74 254.0 88.9 9.1 13.6 2.42 13.7 3.2 194.7 6.54 21.4 4,448.0 302.40
254 x 76 28.29 254.0 75.2 8.1 10.9 1.86 12.2 3.2 203.9 6.99 25.2 3,367.0 162.60
229 x 89 32.76 228.6 88.9 8.6 13.3 2.53 13.7 3.2 169.9 6.68 19.7 3,387.0 285.00
229 x 76 26.06 228.6 76.2 11.2 2.0 12.2 3.2 177.8 6.8 23.40 2,610 158.7 -
203 x 89 29.78 203.2 88.9 8.1 12.9 2.65 13.7 3.2 145.2 6.89 17.9 2,491.0 264.40
203 x 76 23.82 203.2 76.2 7.1 11.2 2.13 12.2 3.2 152.4 6.80 21.5 1,950.0 151.30
178 x 89 26.81 177.8 88.9 7.6 12.3 2.76 13.7 3.2 121.0 7.23 15.9 1,753.0 241.00
178 x 76 20.84 177.8 76.2 6.6 10.3 2.20 12.2 3.2 128.8 7.40 19.5 1,337.0 134.00
152 x 89 23.84 152.4 88.9 7.1 11.6 2.86 13.7 3.2 96.9 7.66 13.7 1,166.0 215.10
152 x 76 17.88 152.4 76.2 6.4 9.0 2.21 12.2 2.4 105.9 8.47 16.5 851.5 113.80
127 x 64 14.90 127.0 63.5 6.4 9.2 1.94 10.7 2.4 84.0 6.90 13.1 482.5 67.23
100 x 50 9.36 100.0 50.0 5.0 7.5 1.55 8.0 - - - - 189.0 26.90
75 x 40 6.92 75.0 40.0 5.0 7.0 1.57 8.0 4.0 - - - 75.9 12.40
70
CHANNELS (Continued)
B
r1 r2
95û
A t
IMPERIAL SERIES T
14.60 2.87 781.80 75.86 932.7 144.40 0.895 22.7 0.15300 46.00 70.19 55.10 381 x 102
11.80 2.91 1,539.00 66.59 638.3 128.10 0.900 18.9 0.08420 355.40 58.83 46.18 305 x 102
11.50 2.48 463.30 48.49 557.1 92.60 0.887 20.4 0.05510 27.60 53.11 41.69 305 x 89
9.88 2.58 350.20 46.70 414.4 89.56 0.906 17.1 0.03470 22.90 45.52 35.74 254 x 89
9.67 2.12 265.10 28.21 317.4 54.14 0.886 21.2 0.01940 12.30 36.03 28.29 254 x 76
9.01 2.61 296.40 44.82 348.4 86.38 0.912 15.5 0.02630 20.40 41.73 32.76 229 x 89
8.87 2.19 228.30 28.22 270.3 54.24 0.900 18.8 0.01510 11.40 33.20 26.06 229 x 76
8.10 2.64 245.20 42.34 266.6 81.62 0.915 14.1 0.01920 17.80 37.94 29.78 203 x 89
8.02 2.23 192.00 27.59 225.2 53.32 0.911 16.7 0.01120 10.40 30.34 23.82 203 x 76
7.16 2.66 197.20 39.29 229.6 75.44 0.915 12.7 0.01340 15.10 34.15 26.81 178 x 89
7.10 2.25 150.40 24.72 175.4 48.07 0.911 15.5 0.00764 8.13 26.54 20.84 178 x 76
6.20 2.66 153.00 35.70 177.7 68.12 0.909 11.3 0.00881 12.40 30.36 23.84 152 x 89
6.11 2.24 111.80 21.05 130.0 41.26 0.902 14.5 0.00486 5.94 22.77 17.88 152 x 76
5.04 1.88 75.99 15.25 89.4 29.31 0.910 11.7 0.00187 4.92 18.98 14.90 127 x 64
71
MILD STEEL FLAT BARS
METRIC SERIES
Section Unit Section Section Unit Section
Size weight area Size weight area
thickness width M A thickness width M A
72
EQUAL ANGLES
y
r2
v u
90º Cy
A t x x
r1
r2 Cy
A t u y v
73
EQUAL ANGLES (Continued)
y
r2
v u
90º Cy
A t x x
r1
r2 Cy
A t u y v
74
UNEQUAL ANGLES
r2
v
y
t
A
ix a
90º iv
r1 x iv x
r2
Cx iu
t u
B Cy iy
v
Designation Mass Radius Area Distance Second Moment Radius Of Elastic Angle
Size Thickness per Root Toe Of Centre Of Area Gyration Modulus x-x
Metre Section Of Gravity Axis
Axis Axis Axis Axis Axis Axis Axis Axis Axis Axis to u-u
AxB t r1 r2 Cx and Cy x-x y-y u-u v-v x-x y-y u-u v-v x-x y-y Axis
75
SQUARE BARS
Section Unit weight Side length Section area Moment Radius of Modulus
Size M a A of inertia gyration of section
76
EXPANDED METAL
77
STEEL BAR
Std. Size (mm) Coss- Unit No. of Pcs. Weight Deviation over and under
High Yield Mild Steel Sectional Weight 12m Length Per Bundle The nominal Mass Per Meta Run%
Deformed Round Area (mm2) (kg/m) Per Bundle (MT)
D8 8 50.3 0.395 210 0.995
-
D9 9 63.6 0.499 168 1.006
D10 10 78.5 0.616 138 1.020 ±6.5%
D12 12 113.1 0.888 96 1.023
D16 16 201.1 1.579 54 1.023
D20 20 314.2 2.466 34 1.006
D22 22 380.1 2.984 28 1.003 ±4.50%
D25 25 490.9 3.854 22 1.017
D28 28 615.8 4.834 18 1.044
D32 32 804.2 6.313 14 1.061
D40 - 1,256.6 9.864 9 1.065
High Yield 0.25 - - 0.050 0.050 0.51 All Size 460 - 1.05 12 - 3D 5D -
Deformed Bar G460
High Yield 0.30 - - 0.050 0.050 0.51 All Size 500 - 1.05 12 - 3D 5D -
MS146 :2000 Deformed Bar G500
Mild Yield 0.25 - - 0.060 0.060 0.42 All Size 250 - 1.05 22 - 2D 2D -
Round Bar G250
High Yield 0.25 - - 0.050 0.050 0.51 All Size 500 - 1.08 14 5 - D<20=5D -
Deformed Bar G460 D>16=7D
BS 4449:1997 Mild Steel 0.25 - - 0.060 0.060 0.42 All Size 250 - 1.15 22 - - 2D -
Round Bar G250
SS2 PART 2 High Yield 0.22 0.60 1.70 0.05 0.05 0.5 All Size 500 550 1.05 14 2.5 20-250 - 32-400
:1999 Deformed Bar G500
SS2 PART 1 Mild Steel - - - 0.060 0.060 Nil 6-20 300 330 1.10 16 - 12.5-63 - -
:1999 Round Bar G300
High Yield 0.22 - - 0.050 0.050 0.44 12-36 500-650 - 1.08 - 5 D>20=4D - D>16=4D
Deformed Bar G500N
Mild Steel 0.22 - - 0.050 0.050 0.43 12-36 250 - 1.08 - 5 D>20=4D - D>16=4D
Round Bar G250N
AS/NZS 46571 High Yield 0.22 - - 0.050 0.050 0.49 6-40 500-800 - 1.15-1.40 - 10 D>20=4D - D>16=4D
:2001 Deformed Bar G500E
Mild Steel 0.22 - - 0.050 0.050 0.43 6-25 300-380 - 1.15-1.40 - 15 D>20=4D - D>16=4D
Round Bar G300E
78
STEEL BAR (Continued)
Common to Steel Bars for General Struture, Cold Finished Carbon Steel Bars, Carbon Steel Bars for
Machine Structural Use, and Steel Rod for Chains.
42 10.9
44 11.9
46 13.0
48 14.2
50 15.4
56 18.7
60 22.2
65 26.0
70 30.2
75 34.7
80 39.5
85 44.5
90 49.9
95 55.6
100 61.7
105 68.0
110 74.6
120 88.8
130 104.0
140 121.0
150 139.0
160 158.0
170 178.0
180 200.0
190 223.0
200 247.0
79
SPECIAL SIZES
Round Tube
Dimension Thickness Calculated Weight
mm (mm) (kg/m)
36 1.6 1.36
54 2.3 2.93
3.0 3.77
4.5 5.49
57 2.3 3.10
3.0 3.99
4.5 5.83
70 2.3 3.84
3.0 4.96
4.5 7.27
127 4.0 12.13
4.5 13.59
5.0 15.04
6.0 17.90
9.0 26.19
Trolley Track
Dimension Thickness Calculated Weight
mm (mm) (kg/m)
1.6 2.13
50 x 50 x 15
2.3 2.98
2.3 3.85
66 x 58 x 20 3.0 4.90
4.5 6.96
U - Channel
Dimension Thickness Calculated Weight
mm (mm) (kg/m)
25 x 25 1.6 0.91
178 x 76 6.0 8.03
Thickness Tolerances: ± 10%
80
SPECIAL SIZES (Continued)
Oval Tube
Dimension A x B Thickness Calculated Weight B
mm (mm) (kg/m)
15 x 30 1.0 0.61
A
(R 7.5) 1.2 0.72
1.6 0.95
21 x 42 1.6 1.27
((R 10.5) 2.3 1.78
3.0 2.36
30 x 115 1.6 3.37
(R 19) 2.3 4.81
3.0 6.22
42 x 115 1.6 3.43
(R 21) 2.0 4.27
2.3 4.89
3.0 6.33
4.0 8.33
48.3 x 120 1.6 3.68
(R 24.15) 2.0 4.60
2.3 5.27
3.0 6.85
4.0 9.04
D - Tube
Dimension Thickness Calculated Weight B
mm (mm) (kg/m)
20 x 40 1.6 1.36
A
(R 10) 2.3 1.91
3.0 2.45
81
CH REBAR SDN. BHD. (485873-T)
Ɣ No Wastage
Ɣ Ready Stock
Ɣ Reasonable Prices
Ɣ On Time Delivery
Ɣ Reliable Services
GALVANISED POST
BOLT & NUT
ESYFENCE
ESYFENCE ESYFENCE
BOLT
FLAT BAR
U-CLIP
ESYFENCE
POST CAP
POST CAP
NUT
ESYFENCE
NUT BOLT
U - CLIP
ESYFENCE
GALVANISED POST
BOLT
U - CLIP
FLAT BAR
GALVANISED POST
POST CAP
U-CLIP
BOLT & NUT
GALVANISED POST
FLAT BAR GALVANISED POST
GAUGE TABLE
in mm in mm in mm in mm
1 0.30000 7.62000 0.35320 8.97100 0.28120 7.14400 0.30000 7.62000
2 0.27600 7.01000 0.31470 7.99300 0.26560 6.74700 0.28400 7.21000
3 0.25200 6.40100 0.28040 7.12200 0.25000 6.35000 0.25900 6.58000
4 0.23200 5.89300 0.25000 6.35000 0.23440 5.95300 0.23800 6.05000
5 0.21200 5.38500 0.22250 5.65200 0.21870 5.55600 0.22000 5.59000
6 0.19200 4.87700 0.19810 5.03200 0.20310 5.15900 0.20300 5.16000
7 0.17600 4.47000 0.17640 4.48100 0.18750 4.76200 0.18000 4.57000
8 0.16000 4.06400 0.15700 3.98800 0.17190 4.36600 0.16500 4.19000
9 0.14400 3.65800 0.13980 3.55100 0.15620 3.96900 0.14800 3.76000
10 0.12800 3.25100 0.12500 3.17500 0.14060 3.57200 0.13400 3.40000
11 0.11600 2.94600 0.11130 2.82700 0.12500 3.17500 0.12000 3.05000
12 0.10400 2.64200 0.09910 2.51700 0.10940 2.77800 0.10900 2.77000
13 0.09200 2.33700 0.08820 2.24000 0.93700 2.38100 0.09500 2.41000
14 0.08000 2.03200 0.07850 1.99400 0.07810 1.98400 0.08300 2.11000
15 0.07200 1.82900 0.06990 1.77500 0.07030 1.78600 0.07200 1.83000
16 0.06400 1.62600 0.06250 1.58800 0.06250 1.58800 0.06500 1.65000
17 0.05600 1.42200 0.05560 1.41200 0.05620 1.42900 0.05800 1.47000
18 0.04800 1.21900 0.04950 1.25700 0.05000 1.27000 0.04900 1.24000
19 0.04000 1.01600 0.04400 1.11800 0.04370 1.11100 0.04200 1.07000
20 0.03600 0.91400 0.03920 0.99570 0.03750 0.95200 0.03500 0.89000
21 0.03200 0.81300 0.03490 0.88650 0.03440 0.87300 0.03200 0.81000
22 0.02800 0.71100 0.03125 0.79380 0.03125 0.79400 0.02800 0.71000
23 0.02400 0.61000 0.02782 0.70660 0.02810 0.71400 0.02500 0.64000
24 0.02200 0.55900 0.02476 0.62890 0.02500 0.63500 0.02200 0.56000
25 0.02000 0.50800 0.02204 0.55980 0.02190 0.55600 0.02000 0.51000
26 0.01800 0.45700 0.01961 0.49810 0.01880 0.47600 0.01800 0.46000
27 0.01640 0.41660 0.01745 0.44320 0.01720 0.43700 0.01600 0.41000
28 0.01480 0.37590 0.01563 0.39690 0.01560 0.39700 0.01400 0.36000
29 0.01360 0.34540 0.01390 0.35310 0.01410 0.35700 0.01300 0.33000
30 0.01240 0.31500 0.01230 0.31240 0.01250 0.31800 0.01200 0.30000
31 0.01160 0.29460 0.01100 0.27940 0.01090 0.27800 0.01000 0.25000
32 0.01080 0.27430 0.00980 0.24890 0.01020 0.25800 0.00900 0.23000
33 0.01000 0.25400 0.00870 0.22100 0.00940 0.23800 0.00800 0.20000
34 0.00920 0.23370 0.00770 0.19560 0.00860 0.21800 0.00700 0.18000
35 0.00840 0.21340 0.00690 0.17530 0.00780 0.19800 0.00500 0.13000
96
Table 1. Comparison Between Grades In BS EN 10 025 : 1993 And BS 4360 : 1986
97
S275JO Fe 430C 410/560 275 250 0 27 23 43C 430/580 275 150 0 27
S275J2G3 Fe 430D1 410/560 275 250 -20 27 23 43D 430/580 275 150 -20 27
S275J2G4 Fe 430D2 410/560 275 250 -20 27 23 43D 430/580 275 150 -20 27
S355 (N5) Fe 510A (N5) 490/630 355 250 - - - 50A 490/640 355 150 - -
S355JR Fe 510B 490/630 355 250 +20 (N6) 27 23 50B 490/640 355 150 +20 (N6) 27
S275JO Fe 510C 490/630 355 250 0 27 23 50C 490/640 355 150 0 27
S275J2G3 Fe 510D1 490/630 355 250 -20 27 23 50D 490/640 355 150 -20 27
S275J2G4 Fe 510D2 490/630 355 250 -20 27 23 50D 490/640 355 150 -20 27
S355K2G3 Fe 510DD1 490/630 355 250 -20 40 33 50DD 490/640 355 150 -30 27
S355K2G4 Fe 510DD2 490/630 355 250 -20 40 33 50DD 490/640 355 150 -30 27
E295 Fe 490-2 470/610 295 250 - - - - - - - - -
E335 Fe 590-2 570/710 335 250 - - - - - - - - -
E360 Fe 690-2 670/830 360 250 - - - - - - - - -
S235JR 1.0037 Fe 360 B St 37-2 E 24-2 AE235 B-FU Fe 360 B AE235-B 13 11-00 Fe 360-B NS 12 120
S235JR G1 1.0036 Fe 360 B(FU) Ust 37-2 AE235 B-FU USt 360 B NS 12 122
S235JR G2 1.0038 Fe 360 B(FN) RST 37-2 40 B 13 12-00 RSt 360 B NS 12 123
S235JO 1.0114 Fe 360 C St 37-3 U E 24-3 40 C AE235 C Fe 360 C AE235-C St 360 C NS 12 124
S235J2G3 1.0114 Fe 360 D1 St37-3 N E 24-4 40 D AE235 D Fe 360 D AE235-D Fe 360-D St 360 D NS 12 124
S235J2G4 1.0117 Fe 360 D2 E 24-4 40 D AE235 D Fe 360 D AE235-D Fe 360-D St 360 D NS 12 124
S275JR 1.0044 Fe 430 B St 44-2 E 28-2 43 B AE275 B Fe 430 B AE255-B 14 12-00 Fe 430-B St 430 B NS 12 142
S275JO 1.0143 Fe 430 C St 44-3 U E 28-3 43 C AE275 C Fe 430 C AE255-C Fe 430-C St 430 C NS 12 143
98
S275J2G3 1.0144 Fe 430 D1 St 44-3 N E 28-4 43 D AE275 D Fe 430 D AE255-D Fe 430-D St 430 CE
S275J2G4 1.0145 Fe 430 D2 E 28-4 43 D AE275 D Fe 430 D AE255-D 14 14-00 Fe 430-D St 430 D NS 12 143
TECHNICAL INFORMATION (Continued)
S355JO 1.0553 Fe 510 C St 52-3 U E 36-3 50 C AE355 C Fe 510 C AE 355-C Fe 510-C St 510 C NS 12 153
S355J2G3 1.0570 Fe 510 D1 St 52-3 N 50 D AE355 D Fe 510 D AE355-D Fe 510-D St 510 D NS 12 153
S355J2G4 1.0577 Fe 510 D2 50 D AE355 D Fe 510 D AE355-D Fe 510-D St 510 D NS 12 153
S355K2G3 1.0595 Fe 510 DD1 E 36-4 50 DD AE355-DD Fe 510-DD
S355K2G4 1.0596 Fe 510 DD2 E 36-4 50 DD AE355-DD Fe 510-DD
E295 1.0050 Fe 490-2 A 50-2 A 490 Fe 480 A 490-2 15 50-00 Fe 490-2 St 490
St 50-2
15 50-01
E335 1.0060 Fe 590-2 A 60-2 A 590 Fe 580 A 590-2 16 50-00 Fe 590-2 St 590
St 60-2
16 50-01
E360 1.0070 Fe 690-2 A 70-2 A 690 Fe 650 A 690-2 16 55-00 Fe 690-2 St 690
St 70-2
16 55-01
CONVERSION GUIDE
99
SYSTEMS OF MEASUREMENT
IMPERIAL SYSTEM
100
CONVERSION FACTORS
101
CONVERSION FACTORS (Continued)
Gram per Kilogram per Pound per Pound per Pound per
Weght per linear unit centimetre metre inch foot yard
g/cm kg/m lb/in lb/ft lb/yd
Gram per centimetre (g/cm) 1 0.1 0.0056 0.0672 0.20165
Kilogram per metre (kg/m) 10 1 0.056 0.67197 2.0165
Pound per inch (lb/in) 178.579 17.8579 1 12 36
Pound per foot (lb/ft) 14.8816 1.48816 0.08333 1 3
Pound per yard (lb/yd) 4.96054 0.49605 0.02778 0.3333 1
Kilogram per Kilogram per Metric ton per Pound per Pound per
Weight per unit area square centimetre square metre square metre square inch square foot
kg/cm2 kg/m2 t/m2 lb/in2 lb/ft2
Kilogram per square centimetre 1 10,000 10 14.21945 2047.58498
(kg/cm2)
Kilogram per square metre (kg/m2) 0.0001 1 0.001 0.0014219 0.204758
Metric ton per square metre (t/m2) 0.1 1 1 1.42195 204.75849
Pound per square inch (lb/in2) 0.0703022 703.02232 0.703 1 144
Pound per square foot (lb/ft2) 0.000487 4.8717976 0.004872 0.006944 1
Kilogram per Kilogram per Metric ton per Pound per Pound per
Weight per unit volume cubic centimere cubic metre cubic metre cubic inch cubic foot
kg/cm3 kg/m3 t/m3 lb/in3 lb/ft3
Kilogram per cubic centimetre 1 1,000,000 1,000 36.1193 62,419
(kg/cm3)
Kilogram per cubic metre (kg/m3) 0.051 1 0.001 0.0436147 0.062419
Metric ton per cubic metre (t/m3) 0.001 1,000 1 0.0361175 62.41857
Pound per cubic inch (lb/in3) 0.02768 27,680.4 27.6804 1 1,728.011
Pound per cubic foot (lb/ft3) 0.0416 16.0196 0.01602 0.0005787 1
102
MEMORANDUM
MEMORANDUM