Professional Documents
Culture Documents
Group 2 Electrical Circuit
Group 2 Electrical Circuit
4-3
CE REGULATION NOT APPLIED
4-4
1. POWER CIRCUIT
The negative terminal of battery is grounded to the machine chassis.
When the start key switch is in the OFF position, the current flows from the positive battery terminal as
shown here.
1) OPERATING FLOW
Battery Battery relay Fusible linkŭCN-60(1)Ů I/connŭCN-5(1)Ů Start key switch
ŭCS-2(1)Ů
I/connŭCN-40(1)Ů
Fuse boxŭNo.19Ů I/connŭCN-38(8)Ů I/connŭCN-6(4)Ů Room lampŭCL-1(2)Ů
Fuse boxŭNo.18Ů I/connŭCN-38(7)Ů ClusterŭCN-8(6)Ů
CPU controllerŭCN-50(10)Ů
Fuse boxŭNo.17Ů I/connŭCN-38(6)Ů Cassette radioŭCN-27(7)Ů
2) CHECK POINT
Ɠ GND : Ground
4-5
POWER CIRCUIT
4-6
2. STARTING CIRCUIT
1) OPERATING FLOW
Battery(+) terminal Battery relay(M8, B+ terminal) Fusible linkŭCN-60(1)Ů
I/connŭCN-5(1)Ů Start key switchŭCS-2(1)Ů
2) CHECK POINT
Ɠ GND : Ground
4-7
STARTING CIRCUIT
4-8
3. CHARGING CIRCUIT
When the starter is activated and the engine is started, the operator releases the key switch to the ON
position.
Charging current generated by operating alternator flows into the battery through the Battery
relay(CR-1).
The current also flows from alternator to each electrical component and controller through the fuse
box.
1) OPERATING FLOW
AlternatorūIŬterminal I/connŭCN-1(2)Ů CPU Alternator power level
ŭCN-51(18)Ů,
Charging lampŭCN-53(7)Ů I/connŭCN-7(7)Ů cluster charging warning lamp
ŭCN-56(7)Ů
2) CHECK POINT
Engine Key switch Check point Voltage
Ɠ GND : Ground
4-9
CHARGING CIRCUIT
4 - 10
CHARGING CIRCUIT(CE Regulation not applied)
When the starter is activated and the engine is started, the operator releases the key switch to the ON
position.
Charging current generated by operating alternator flows into the battery through the Battery
relay(CR-1).
The current also flows from alternator to each electrical component and controller through the fuse
box.
1) OPERATING FLOW
AlternatorūIŬterminal I/connŭCN-1(2)Ů CPU Alternator power level
ŭCN-51(18)Ů,
Charging lampŭCN-53(7)Ů I/connŭCN-7(7)Ů cluster charging warning lamp
ŭCN-56(7)Ů
2) CHECK POINT
Engine Key switch Check point Voltage
Ɠ GND : Ground
4 - 11
CHARGING CIRCUIT(CE Regulation not applied)
4 - 12
4. HEAD LIGHT CIRCUIT
1) OPERATING FLOW
Fuse box (No.8) I/connŭCN-37(1)Ů Head light switchŭCS-39(6)Ů
Head light relayŭCR-13(4)Ů
Ɠ When Light switch ON
Head light switch ONŭCS-39(2)Ů Head light relayŭCR-13(3) Ɗ (1)Ů Ground
ŭCR-13(4) Ɗ (2)Ů
Head light ONŭCL-3(2)Ů
I/connŭCN-4(7)Ů Head light ONŭCL-4(2)Ů
I/connŭCN-7(9)Ů Cluster illumination LampŭCN-56(9)Ů
2) CHECK POINT
Ɠ GND : Ground
4 - 13
HEAD LIGHT CIRCUIT
4 - 14
HEAD LIGHT CIRCUIT(CE Regulation not applied)
1) OPERATING FLOW
Fuse box (No.8) I/connŭCN-37(1)Ů Head light switchŭCS-39(6)Ů
Head light relayŭCR-13(4)Ů
Ɠ When Light switch ON
Head light switch ONŭCS-39(2)Ů Head light relayŭCR-13(3) Ɗ (1)Ů Ground
ŭCR-13(4) Ɗ (2)Ů
Head light ONŭCL-3(3)Ů
I/connŭCN-4(7)Ů Head light ONŭCL-4(3)Ů
I/connŭCN-7(9)Ů Cluster illumination LampŭCN-56(9)Ů
2) CHECK POINT
Ɠ GND : Ground
4 - 15
HEAD LIGHT CIRCUIT(CE Regulation not applied)
4 - 16
5. WORK LIGHT CIRCUIT
1) OPERATING FLOW
Fuse box (No.9) I/connŭCN-37(2)Ů Work light switchŭCS-36(6)Ů
Work light switchŭCR-3(4)Ů
Ɠ When Light switch ON
Work light switch ONŭCS-36(2)Ů Work light relayŭCR-3(3) (1)Ů Ground
ŭCR-3(4) (2)Ů
I/connŭCN-7(10)Ů Cluster Work light ONŭCN-56(10)Ů
I/connŭCN-4(4)Ů I/connŭCN-10(2)Ů Work light ONŭCL-6(2), CL-5(2)Ů
2) CHECK POINT
Ɠ GND : Ground
4 - 17
WORK LIGHT CIRCUIT
4 - 18
WORK LIGHT CIRCUIT(CE Regulation not applied)
1) OPERATING FLOW
Fuse box (No.9) I/connŭCN-37(2)Ů Work light switchŭCS-36(6)Ů
Work light switchŭCR-3(4)Ů
Ɠ When Light switch ON
Work light switch ONŭCS-36(2)Ů Work light relayŭCR-3(3) (1)Ů Ground
ŭCR-3(4) (2)Ů
I/connŭCN-7(10)Ů Cluster Work light ONŭCN-56(10)Ů
I/connŭCN-4(4)Ů I/connŭCN-10(3)Ů Work light ONŭCL-6(3), CL-5(3)Ů
2) CHECK POINT
Ɠ GND : Ground
4 - 19
WORK LIGHT CIRCUIT(CE Regulation not applied)
4 - 20
6. CAB LIGHT CIRCUIT
1) OPERATING FLOW
Fuse box (No.10) I/connŭCN-37(3)Ů Cab light switchŭCS-24(6)Ů
Cab light relayŭCR-9(4)Ů
Ɠ When Light switch ON
Cab light switch ONŭCS-24(2)Ů Cab light relayŭCR-9(3) (1)Ů Ground
ŭCR-9(4) (2)Ů
I/connŭCN-6(5)Ů I/connŭCN-14(4)Ů
Cab light ONŭCL-8(rear), CL-10(RH), CL-9(LH)Ů
2) CHECK POINT
Ɠ GND : Ground
4 - 21
CABIN LIGHT CIRCUIT
4 - 22
7. WIPER MOTOR CIRCUIT
1) OPERATING FLOW
(1) Wiper motor switch ON
Fuse box (No.1) I/connŭCN-36(6)Ů Wiper motor relayŭCR-4(2) ( 6)Ů
Wiper switchŭCS-3(6) ( 2)Ů Ground
Wiper motor relayŭCR-4(4) ( 1)Ů
I/connŭCN-6(1)Ů I/connŭCN-13(1)Ů
Wiper motor operatingŭCN-21(1)Ů
2) CHECK POINT
Ɠ GND : Ground
4 - 23
WIPER MOTOR CIRCUIT
4 - 24
WIPER MOTOR CIRCUIT(CE Regulation not applied)
1) OPERATING FLOW
(1) Wiper motor switch ON
Fuse box (No.1) I/connŭCN-36(6)Ů Wiper motor relayŭCR-4(2) ( 6)Ů
Wiper switchŭCS-3(6) ( 2)Ů Ground
Wiper motor relayŭCR-4(4) ( 1)Ů
I/connŭCN-6(1)Ů I/connŭCN-13(1)Ů
Wiper motor operatingŭCN-21(1)Ů
2) CHECK POINT
Ɠ GND : Ground
4 - 25
WIPER MOTOR CIRCUIT(CE Regulation not applied)
4 - 26
CONTROLLER CIRCUIT
4 - 27
ELECTRICAL CIRCUIT FOR HYDRAULIC
4-28
MONITORING CIRCUIT
4-29