Professional Documents
Culture Documents
Values and Settings Timing Belt Tension
Values and Settings Timing Belt Tension
Values and Settings Timing Belt Tension
NOTE :
Belt tension (in SEEM units)
- For the F8Q engine, remove the pin Mot 1054
before fitting the sensor of Mot 1273 and
press hard on the piece of belt between the Fitting: 30 U.S. ± 5 %
intermediate shaft sprocket (or idle sprocket)
Minimum operating : 26 U.S.
and the tension roller, then carry out the mea-
surement.
F8Q engine
- Never refit a belt which has been removed.
- Replace the belt if the tension is below the mi-
nimum operating tension.
D7F engine
13094R
Fitting: 29 U.S. ± 5 %
07-12
http://jester.com.ua/renault/Clio/MR337CLIO0_27.html 24.07.2003