Professional Documents
Culture Documents
Material Safety Avabentoil Hy
Material Safety Avabentoil Hy
AVABENTOIL HY
Emergency telephone number Off.: +39 06 885611324; +39 06 885611326; +39 06 885611373
Mob.: +39 3355897280; +39 3355234619; +39 3355710385
Telefax +39-06-8889363
2. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical description Polymer treated Organophilic clay
Hazardous Impurities The product contains a small amount (5%) of crystalline silica which
may cause delayed respiratory disease if inhaled over a prolonged
period of time.
EINECS-No.
CAS-No.
3. HAZARD IDENTIFICATION
Inhalation Inhalation of fine dusts can cause pneumoconiosis. Avoid generating
dusts. Do not breathe dust
Human health hazards - Chronic Repeated inhalation of fine dusts may cause pneumoconiosis
Skin contact Take off contaminated clothing. Wash off with plenty of water.
Eye contact Gently irrigate with clean water. If irritation persist, obtain medical
attention
Other information
Fire and explosion hazard The dust may ignite violently when mixed with air and subject to
ignition source.
Protective equipment In case of fire wear a full face positive pressure self contained
breathing apparatus and protective suit
Methods for cleaning up Remove as much as possible with broom, scoop or vacuum, as the
addition of water causes slippery floor conditions. System should be
earthed to avoid risk of ignition by static electricity. The product makes
the ground slippery when wet.
Colour Whitish
Odour None
pH N/A
Viscosity N/A
Conditions to avoid Avoid contact with high temperatures and ignition sources
Primary irritation skin/eye May cause irritation with prolonged contact. May cause mild irritation
Do not discharge into drains or the environment, dispose to an authorized waste collection point
UN Number N/A
Revision date May 2005 Page 3/4
Material Safety Data Sheet
AVABENTOIL HY
ADR/RID
IMDG
Em S
IATA
Class
15. REGULATORY INFORMATION
EC Classification Not regulated
contains:
Risk Phrases
This material safety data sheet provides health and safety information. The product is to be used in applications consistent
with AVA technology. Individuals handling this product should be informed of the safety precautions and should have
access to this information.