Professional Documents
Culture Documents
Fire Door CPWD Specification
Fire Door CPWD Specification
Fire Door CPWD Specification
73
LABOUR:
0112 Carpenter 2nd class day 0.330 399.00 131.67
0114 Beldar day 0.250 329.00 82.25
9999 Sundries L.S. 19.760 1.78 35.17
TOTAL 2122.66
Add Water Charges @ 1% 21.23
TOTAL 2143.89
Add CPOH @ 15% 321.58
Cost of 1.54 sqm 2465.47
Cost of 1 sqm 1600.95
Say 1600.95
9.136 Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of
16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete
mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire
seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size
and make, including applying a coat of approved brand fire resistant primer etc. complete as per
direction of Engineer-in-charge (Dash fastener to be paid for separately).
Code No Description Unit Quantity Rate ` Amount `
9.137 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming
to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable
mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200
mm wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/ m2) duly filled FR insulation
material and fixing with necessary stainless steel ball bearing hinges of approved make, including
applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-
charge (panneling to be paid for separately).
Code No Description Unit Quantity Rate ` Amount `
Details of cost for 3.50 sqm (Door size-1710x2050 mm)
MATERIAL:
8739 Fire rated door shuttere made with 16 SWG
G.I. sheet (60 minutes) without panel sqm 3.500 5300.00 18550.00
9999 Labour L.S. 180.000 1.78 320.40
9999 Sundries and carriage L.S. 10.000 1.78 17.80
TOTAL 18888.20
Add Water Charges @ 1% 188.88
TOTAL 19077.08
Add CPOH @ 15% 2861.56
Cost of 3.5 sqm 21938.64
Cost of 1 sqm 6268.18
Say 6268.20
9.138 Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc.,
with G.I. beading of appropriate size, made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/
m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading
etc., complete all as per direction of Engineer-in-charge.
9.138.1 With clear fire resistant glass panes 6 mm thick of approved brand, having minimum 60 minutes fire
resistance
Code No Description Unit Quantity Rate ` Amount `
9.139 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back
side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge,
all complete.
Code No Description Unit Quantity Rate Amount
Details of cost for each
MATERIAL:
8744 Panic Bar / latch (Double point) each 1.000 5200.00 5200.00
Labour for fixing
0111 Carpenter 1 st class day 0.170 435.00 73.95
9999 Sundries (screws and carriage) L.S. 3.640 1.78 6.48
TOTAL 5280.43
Add Water Charges @ 1% 52.80
TOTAL 5333.23
Add CPOH @ 15% 799.98
Cost of each 6133.21
Say 6133.20
9.140 Providing and fixing plain lining with necessary screws/nuts & bolts/nails, including a coat of approved
primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in-
charge (Frame work shall be paid for separately).
9.140.1 12 mm thick commercial ply conforming to IS : 1328 BWR type
Code No Description Unit Quantity Rate ` Amount `
Details of cost for 10 sqm
MATERIAL:
2413 12 mm commercial ply sqm 11.000 700.00 7700.00
Priming coat
13.50.1 Rate as per Item Number 13.50.1 of SH: Finishing sqm 10.000 32.95 329.50 A
9999 Sundries and screws etc. L.S. 40.100 1.78 71.38