Professional Documents
Culture Documents
Unisonic Technologies Co., LTD: Low Dropout Voltage Regulator
Unisonic Technologies Co., LTD: Low Dropout Voltage Regulator
, LTD
78RXX LINEAR INTEGRATED CIRCUIT
DESCRIPTION TO-220B
ORDERING INFORMATION
Ordering Number
Package Packing
Lead Free Halogen Free
78RXXL-TB5-T 78RXXG-TB5-T TO-220B Tube
78RXXL-TF4-T 78RXXG-TF4-T TO-220F-4 Tube
78RXXL-TN5-R 78RXXG-TN5-R TO-252-5 Tape Reel
Note: xx: output voltage, refer to Marking Information
www.unisonic.com.tw 1 of 12
Copyright © 2011 Unisonic Technologies Co., Ltd QW-R102-035.F
78RXX LINEAR INTEGRATED CIRCUIT
MARKING INFORMATION
PACKAGE VOLTAGE CODE MARKING
33: 3.3V
TO-220F-4 05: 5.0V
TO-252-5 09: 9.0V
12: 12V
33: 3.3V
05: 5.0V
TO-220B 09: 9.0V
12: 12V
00: ADJ
PIN DESCRIPTIONS
PIN NO.
PIN NAME PIN FUNCTION
TO-220F-4/TO-220B TO-252-5
1 1 VIN Input voltage pin
2 3 VOUT Output voltage pin
3 5 GND GND
4 2 VDIS Disable signal input pin
5 - ADJ Adjustable input pin ( FOR TO-220B )
- 4 NC
BLOCK DIAGRAM
Overvoltage
Protection
VIN 1 Bandgap
-
Reference
+
Thermal
Shutdown Q1
SOA
Protection
R1
2 VOUT
Short-Circuit
Protection High/Low
Output
- ON/OFF
R2 +
1.4V
3 4
GND VDIS
BLOCK DIAGRAM
Overvoltage
Protection
VIN 1 Bandgap
-
Reference
+
Thermal
Shutdown Q1
SOA
Protection
2 VOUT
Short-Circuit
Protection High/Low
Output
- ON/OFF
1.4V
3 5 4
GND ADJ VDIS
ABSOLUTE MAXIMUM RATINGS (Operating temperature range applies unless otherwise specified. )
PARAMETER SYMBOL RATINGS UNITS
Input Voltage VIN 35 V
Disable Voltage VDIS 35 V
Output Current IOUT 1.0 A
TO-220B/TO-220F-4 1.5 W
Power Dissipation PD
TO-252-5 1 W
Junction Temperature TJ +150 °C
Operating Temperature TOPR -40 ~ +85 °C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
THERMAL DATA
PARAMETER SYMBOL RATING UNIT
TO-220B/TO-220F-4 62.5 °C/W
Junction to Ambient θJA
TO-252-5 110 °C/W
TO-220B/TO-220F-4 4 °C/W
Junction to Case θJC
TO-252-5 12 °C/W
ELECTRICAL CHARACTERISTICS(Cont.)
* CI is required if regulator is located an appreciable distance from power supply filter. [CI > 0.33μF (Electrolytic)]
* Co improves stability and transient response. [CO > 47μF(Electrolytic)]
* CI is required if regulator is located an appreciable distance from power supply filter. [CI > 0.33μF (Electrolytic)]
* Co improves stability and transient response. [CO > 47μF(Electrolytic)]
(1) 78R33
78RXX
www.unisonic.com.tw
TYPICAL CHARACTERISTICS
QW-R102-035.F
8 of 12
78RXX LINEAR INTEGRATED CIRCUIT
TYPICAL CHARACTERISTICS(Cont.)
Output Peak Current, IOP (A)
(2) 78R05
6
25
Quiescent Current, IQ (mA)
Output Voltage, VOUT (V)
5
RL=∞ 20
RL=5Ω
4
15
3
2 10
RL= ∞
1 5
0 0
0 5 10 15 0 5 10 15 20 25
Input Voltage, VIN (V) Input Voltage, VIN (V)
Relative Output Voltage, (%)
Output Voltage, VOUT (V)
5.04
5.02
6
5.00
4.98 4
4.96
2
4.94
4.92 0
-25 0 25 50 75 100 125 -25 0 25 50 75 100 125
Junction Temperature,TJ (°С) Junction Temperature,TJ (°С)
Output Peak Current, IOP (A)
(3) 78R09
Quiescent Current, IQ (mA)
Output Voltage, VOUT (V)
7
60
6
5
40
4
3
2 20
0 0
0 0.5 1 1.5 2 2.5 3 0 0.5 1.0 1.5 2.0 2.5 3.0
Disable Voltage, VDIS (V) Output Current, IOUT (A)
9.04
Quescent Current, IQ (mA)
8
Output Voltage, VOUT (V)
9.02
6
9.00
8.98 4
8.96
2
8.94
8.92 0
-25 0 25 50 75 100 125 -25 0 25 50 75 100 125
Junction Temperature, TJ (°С) Junction Temperature, TJ (°С)
Output Peak Current, IO(PEAK) (A)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.