Professional Documents
Culture Documents
Fluid Mechanics - Unit 6 - Week 5 - APPLICATIONS OF FLUID STATICS AND DYNAMICS
Fluid Mechanics - Unit 6 - Week 5 - APPLICATIONS OF FLUID STATICS AND DYNAMICS
Assessment submitted.
(https://swayam.gov.in) (https://swayam.gov.in/nc_details/NPTEL)
X
babussr@gmail.com
Announcements (announcements)
Week 4 : FLUID 2) The force per unit width on the rectangular door submerged in a liquid of density 𝝆 (figure 1 point
DYNAMICS shown below is) is
Week 5 :
APPLICATIONS
OF FLUID
STATICS AND
DYNAMICS
Fluid Statics
Applications: a. √2𝝆g
Problems
https://onlinecourses.nptel.ac.in/noc19_ce28/unit?unit=22&assessment=32 1/4
02/10/2019 Fluid Mechanics - - Unit 6 - Week 5 : APPLICATIONS OF FLUID STATICS AND DYNAMICS
Week 6 : FLUID c. Water: 2.354 N/cm2; Oil: 0.2943 N/cm2; Mercury: 4.002 N/cm2.
KINEMATICS
Live Session d. Water: 0.2943 N/cm2; Oil: 2.354 N/cm2; Mercury: 4.002 N/cm2.
5) A simple U-tube manometer containing mercury is connected to a pipe in which a fluid 2 points
of specific gravity 0.8 and having vacuum pressure is flowing. The other end of the manometer is
open to atmosphere. Find the vacuum pressure in pipe, if the difference of mercury level in the two
limbs is 40 cm and height of the fluid in the left from the centre of pipe is 15 cm below. Given specific
gravity of mercury is 13.6
a. -5.454 N/m2
b. -5.454 N/cm2
c. -5454.36 N/m2
d. -54.543 N/m2
6) A horizontal water jet with a velocity of 10 m/s and cross-sectional area of 10 mm2 2 points
strikes a fixed plate held normal to the flow direction. Find the total force acting on the plate. (Take
density of water, 𝝆 =1000 kg/m3).
a. 1 kN
b. 1 N
c. 10 kN
d. 10 N
7) The diameters of a pipe at the sections 1 and 2 are 10 cm and 15 cm respectively. 4 points
Given velocity of water flowing through the pipe at section 1 is 5 m/s. Determine velocity at section 2
https://onlinecourses.nptel.ac.in/noc19_ce28/unit?unit=22&assessment=32 2/4
02/10/2019 Fluid Mechanics - - Unit 6 - Week 5 : APPLICATIONS OF FLUID STATICS AND DYNAMICS
8) A pitot-static tube is used to measure the velocity of water in a pipe. The stagnation 2 points
pressure head is 6 m and static pressure head is 5 m. calculate the velocity of flow assuming the
coefficient of pitot-tube equal to 0.98.
a. 3.34 m/s
b. 2.24 m/s
c. 3.24 m/s
d. 4.34 m/s
9) A pipe of constant diameter 400 mm carries water at velocity of 25 m/s. The pressures at 1 point
points A and B are given as 29.43 N/cm2 and 22.563 N/cm2 respectively while the datum head at A
and B are 28 m and 30 m. Find the loss of head between A and B.
a. 3 m
b. 4 m
c. 5 m
d. 6 m
You may submit any number of times before the due date. The final submission will be
considered for grading.
Submit Answers
https://onlinecourses.nptel.ac.in/noc19_ce28/unit?unit=22&assessment=32 3/4
02/10/2019 Fluid Mechanics - - Unit 6 - Week 5 : APPLICATIONS OF FLUID STATICS AND DYNAMICS
Assessment submitted.
X
https://onlinecourses.nptel.ac.in/noc19_ce28/unit?unit=22&assessment=32 4/4