Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

C40 Cleaning masonry/concrete

C41 Repairing/Renovating/Conserving masonry


C42 Repairing/Renovating/Conserving concrete
INFORMATION PROVIDED MEASUREMENT RULES DEFINITION RULES COVERAGE RULES SUPPLEMENT ARY
INFORMATION

P1 The following information is shown either on location drawings under A Preliminaries/General conditions or on further drawings M1 The rules within this 01 Materials arising are the C1 Shoring and scaffolding S1 Method of operation,
which accompany the bills of quantities: Section apply to works to property of the Contractor incidental to the work and where by specific means
(a) the scope and location of the work relative to the exi$ting layout indicating the existing structure existing buildings as defined unless otherwise stated making good all work S2 Setting aside and
in the General Rules disturbed by such shoring storing materials remaining
02 Locations stated
and scaffolding is deemed to the property of the Employer
relative to the existing
be included or those for re-use
building
C2 Work to existing S3 Employefs restrictions
buildings items are deemed on methods of disposal of
to inciude: materials
(a) disposal of materials
other than those S4 Restrictions on the
remaining the property method of shoring and
of the Employer or scaffolding
those for re-use
(b) incidental work which is
at the discretion of the
Contractor
CLASSIFICATION TABLE (c) all new fixing or joining
materials required

1 Cutting out defective 1 Dimensioned description 1 Plain, details stated m2 1 Treatment of C3 Formwork and making S5 Method of bonding new
concrete and replacing -- reinforcement, details good to match existing are to existing
2 Reinforced, details stated deemed to be included
with new m stated
3 Gun applied, details -- 2 Anchored mesh
stated nr
reinforcement, details
stated

2 Resin or cement 1 Dimensioned description 1 Concrete. details stated m2 1 Centres of drilling holes C4 Work is deemed 10
impregnation/injection -- include making good holes
2 Brickwork, details stated 2 Removing existing and finishes on completion
m finishes
3 Blockwork, details stated --
4 Stonework, details stated nr

3 Cutting out decayed, 1 Size and depth or 1 Brickwork, details stated m2 1 Making good with CS Work is deemed to S6 Method of bonding new
defective or cracked work thicilness stated -- materials other than to include making good to to existing
2 Blockwork, details stated match existing
and replacing with new m match existing, details
3 Stonework, details stated -- stated
nr

4 Repointing 1 Size and depth ol raking 1 Brickwork, details stated m2 1 Type of pointing M2 Details stated indude CG Repointing is deemed to S7 Composition and mix of
out of existing joint -- bond and size of component include making good to mortar
2 Blockwork, details stated m adjoining work
3 Stonework, details stated - --
nr

You might also like