Professional Documents
Culture Documents
Aluminum Frame 8: 132 Seater
Aluminum Frame 8: 132 Seater
Providing & fixing position of partly glazed, dual shade laminated partition unto
approved level or ceiling level. Using 2"x1" Aluminum frame work for 2.5"x2'0x2'0"
structure work and sandwiched by 12mm tk commercial plywood on both sides with
1mm laminate of approved dual color and partly insert 8 mm float glass for glazed Sqft
area. All the nails, screws of hardware etc...should be approved quality, height shall be
as per required (may vary subjected to actual measurement and design).
Providing & fixing position of partly glazed, dual shade laminated partition unto
approved level or ceiling level. Using 2"x1" Aluminum frame work for 2.5"x2'0x2'0"
structure work and sandwiched by 12mm tk commercial plywood on both sides with
Sqft
1mm laminate of approved dual color. All the nails, screws of hardware etc...should be
approved quality, height shall be as per required (may vary subjected to actual
measurement and design).
Providing & fixing in position of dual shade laminated partition unto approved level or
4'0" Level. Using 70mm aluminium powdered coated profile for all side structure work
b and insert MDF board with approved dual color. All the nails, screws of hardware Sqft
etc...should be approved quality and design. Height shall be as per required. 14 Seater
Providing & fixing in position of dual shade laminated partition unto approved level or
4'0" Level. Using 70mm aluminium powdered coated profile for all side structure work
c and insert MDF board with approved dual color. All the nails, screws of hardware Sqft
etc...should be approved quality and design. Height shall be as per required. 10 Seater
7 Low Storages
Providing and fixing of low height storages with 18mm, 12mm MR grade Plywood and
top made of 40mm thick. All exterior surfaces finished with 1mm laminate of selected
double shades and inside area given skin laminate complete. Provide shelf, open able Sqft
shutters of width 1'6" or Equivalent with approved quality of locks, handles etc..
MODULAR
8 Door Accessories
Providing & fixing partition flush door with accessories made to 32mm flush door, Door
closer, SS matt finish lock, Stopper, SS matt finish handles and all necessary hardware SQFT
accessories. Door finished with 1mm laminate of approved twin shades on both sides
as per drawing & design.
9 Glass Door Accessories
Providing & fixing position of single leaf fully glazed doors formed out of 10mm thick
toughened glass fitted with top & bottom patch fittings, SS pull handle, top pivot, floor Nos
spring of Hettich or Dorma make etc., complete.
10 Glass Door Accessories
Providing & fixing position of single leaf fully glazed doors formed out of 12mm thick
toughened glass fitted with top & bottom patch fittings, SS pull handle, top pivot, floor Nos
spring of Hettich or Dorma make etc., complete.
11 Modular Work Station Table Top & Leg
Providing and fixing of 25mm table top with 25 mm, 17mm MDF OSL board or
Equivalent board for top & leg panel and top surfaces finished with approved laminate
a
post forming and edges finish with 2mm edge banding of selected shade & Necessary Sqft
hardware's complete with approved design. 132 Seater
Providing and fixing of 25mm table top with 25 mm, 17mm MDF OSL board or
Equivalent board for top & leg panel and top surfaces finished with approved laminate
b
post forming and edges finish with 2mm edge banding of selected shade & Necessary Sqft
hardware's complete with approved design. 14 Seater
Providing and fixing of 25mm table top with 25 mm, 17mm MDF OSL board or
Equivalent board for top & leg panel and top surfaces finished with approved laminate
c
post forming and edges finish with 2mm edge banding of selected shade & Necessary Sqft
hardware's complete with approved design. 10 Seater
10 Pedestal-Draw Unit
Providing and fixing of Pedestal unit with 17mm MDF OSL board or Equivalent board
for frame work and frame finished with approved shade laminate of all visible area. Nos
Provide have three pullout roller drawer with single operation locks, SS handles as
required.
12 Keyboard and Trolley Nos
Providing and fixing of Chairman/MD/ED MAIN table with 18mm, 12mm, 6mm MR
grade Plywood for frame work and table topside made to 50mm thick. Table frame
13 finished with approved dual shade 1mm laminate for all visible area and Inside given Nos
skin laminate complete. Edges will be finished with same shades. The table will have
one keyboard with mouse drawer, soft close three pullout drawer of width 1'9".
Adequate locks, SS handles as required shall be provided. Carpentry
Providing and fixing of low height Back storages with 18mm, 12mm MR grade Plywood
and top made of 40mm thick. All exterior surfaces finished with 1mm laminate of
a selected double shades and inside area given skin laminate complete. Provide shelf, Sqft
open able shutters of width 1'6" or Equivalent with approved quality of locks, handles
etc.. Carpentry
Providing and fixing of VP /GM /MAIN table with 18mm, 12mm, 6mm MR grade
Plywood for frame work and table topside made to 50mm thick. Table frame finished
14 with approved dual shade 1mm laminate for all visible area and Inside given skin Nos
laminate complete. Edges will be finished with same shades. The table will have one
keyboard with mouse drawer, soft close three pullout drawer of width 1'9". Adequate
locks, SS handles as required shall be provided. Modular
Providing and fixing of side table with 18 mm, 12mm MR grade Plywood for frame
work and all exterior surfaces finished with 1mm laminate of selected dual shades and
15 Nos
top & side made of 40mm thick. Provide open able shutters and hinges & Necessary
hardware's complete with approved design. Modular
Providing and fixing of Reception table with 18 mm, 12mm MR grade Plywood for
20 frame work and all exterior surfaces finished with 1mm laminate of selected dual Nos
shades and top & side made of 25mm thick. Provide open able shutters and hinges &
Necessary hardware's complete with approved design. Carpentry
Providing and fixing of projection board with 18mm, 12mm, 6mm MR grade Plywood
21 for 3" thick frame and outer border finished with approved dual shade 1mm laminate Sqft
of all visible area and projection & writing area given marker sheet laminate complete.
1,220.00
1,088.00
200.00 200.00 220.00 528.00 500.00 440.00
52.00 104.00
4.00
1.00
200.00 200.00
1,220.00
73.50 1,161.50
2,496.00 2,496.00
264.00 264.00
168.00 168.00
759.00 2,847.00
1,692.00
26.00 182.00
52.00 468.00
2,698.00 2,698.00
355.50 355.50
134.50 134.50
156.00 156.00
156.00 156.00
4.00
162.00
26.00
4.00
3.00 3.00
- 1.00
- 5.00 5.00
1.00 1.00
400.00
13,739.00 13,739.00
759.00 10,000.00 14,139.00
3,080.00 3,080.00
25.00 25.00
1.00 1.00
1.00 1.00
1.00
528.00 528.00
1,334.00 1,418.00
5.00
140.00
4.00
40.00
3.00 5.00
50.00 50.00
12.00 1.00 156.00 261.00
224.00
Total Amount
Cost
Rate Total
480 4,627,920.00
480 585,600.00
350 406,525.00
250 624,000.00
250 66,000.00
250 42,000.00
100 284,700.00
1150 1,633,575.00
500 91,000.00
950 444,600.00
3500 546,000.00
700 109,200.00
100