Professional Documents
Culture Documents
EP16020 Dated 23.06.2020 - TID - 562 - Technical Volume II of II - Part 2
EP16020 Dated 23.06.2020 - TID - 562 - Technical Volume II of II - Part 2
PTS- GASKET
Page 1 of 5
INDRAPRASTHA GAS LIMITED PTS-GASKET IGL/ GT /PTS / 2020
5.0 INSPECTION……………………………………………………………………………………………………………………….….. 3
6.0. DOCUMENTS TO BE SUBMITTED……………………………………………………………………………………………….4
ANNEXURE - I……………………………………………………………………………………………………………………… 5
Page 2 of 5
INDRAPRASTHA GAS LIMITED PTS-GASKET IGL/ GT /PTS / 2020
2.1 The scope includes manufacture, supply, inspection, testing, marking, packaging, handling
and despatch of GASKET, as indicated in the Material Requisition & Schedule of Rates,
meeting all the requirements as laid down in manufacturing standards.
2.2 All codes and standard for manufacture, testing, inspection etc. shall be of latest edition.
2.3 Owner/ Owner’s Representative reserves the right to delete or order additional quantities
during executionof order, based on unit rates and other terms & conditions in the original
order
2.4 The dimensions mentioned in SOR are indicative. The successful bidder has to ensure to
confirm the dimensions and the material for the particular type of gasket after visiting the site.
The samples has to approved by the TPI/EIC before supplying the entire lot.
3.0 DEFINITIONS
As given in Annexure 1
5.0 INSPECTION
SUPPLIER shall submit ITP to CLIENT/CLIENT’s representative for approval and also provide
required certification as mentioned in MR.
Inspection shall be carried out as per Technical Specifications and approved Inspection Test Plan.
SUPPLIER shall furnish all the material test certificates, proof of approval/license from
specified authority as per specified standard, at the time of final inspection of each supply lot of
material. Also, all above mentioned certificates to be furnished in soft copy to M/s IGL.
Even after third party inspection, owner reserves the right to select a sample randomly from
each manufacturing batch and have these independently tested .should the results of these
tests fall outside the limits specified in IGL technical specifications, then IGL reserves the right
to reject all production supplied from the batch.
5.1.1. Packaging
Package size to be mentioned to ensure uniformity in delivery conditions of the material being procured.
Package size shall be approved by owner / owner’s representative before dispatching the material. Bidder
shall submit the packaging details during of GTr and also complied with at the time of delivery
Page 3 of 5
INDRAPRASTHA GAS LIMITED PTS-GASKET IGL/ GT /PTS / 2020
Manufacturing Standards
Catalogues in English
Sizing calculations
Test reports
Operational/Installation Manual
Page 4 of 5
INDRAPRASTHA GAS LIMITED PTS-GASKET IGL/ GT /PTS / 2020
ANNEXURE -I
Page 5 of 5