Professional Documents
Culture Documents
Meth Method Statement For Inside Working of Pontoons
Meth Method Statement For Inside Working of Pontoons
Meth Method Statement For Inside Working of Pontoons
1. PURPOSE
The purpose of this method statement is to safeguard personnel who enter the
pontoons.
2. SCOPE
This method statement covers the safety requirements of physical entry into
pontoons, and is applicable at GULF FARABI n-PARAFFIN & LAB PROJECT.
3. RESPONSIBILITIES
3.1.1 Maintaining the conditions and requirements listed on the work permit.
3.1.2 Remaining at the point of entry at all times when personnel are inside
the pontoons.
3.1.3 Keeping track of the personnel entering & leaving the pontoons
through a confined space entry log sheet.
3.1.4 Maintaining contact with person(s) inside the pontoons by voice , rope
signal or hand horn.
3.2.2 Monitoring conditions in the adjacent areas for situations that could
endanger personnel working inside the pontoons.
Page 1 of 2
METH METHOD STATEMENT FOR INSIDE WORKING OF PONTOONS
4. PROCEDURE/METHOD
4.3 A standby man shall be deputed at point of entry, and shall be having a first
aid & CPR training.
4.6 Exhaust fan will be installed at man way for proper ventilation.
4.7 The entrant & standby man will communicate each other through rope signal
or voice after every ten minutes.
4.8 The standby man and entrant(s) will be provided training by OLAYAN
DESCON for safe working inside the pontoons.
4.9 The entrant (welder) shall get outside the pontoons after every 30 minutes
to have fresh air breathing, or whenever he feels uncomforted.
4.10 No hot work shall be carried out without obtaining HOT WORK Permit.
Page 2 of 2