Professional Documents
Culture Documents
Damen Cutter Suction Dredger 350: List of Standard Equipment
Damen Cutter Suction Dredger 350: List of Standard Equipment
DREDGING
CSD 350/2007/10
Edisonstraat 32 P.O. Box 1021 phone +31 (0)33 247 40 40 info@damendredging.com
3861 NE Nijkerk 3860 BA Nijkerk fax +31 (0)33 247 40 60 www.damendredging.com
The Netherlands
© No part of this leaflet may be reproduced in any form, by print, photo print, microfilm, or any other means, without written permission from Damen Dredging Equipment.
The DAMEN cutter suction dredger - model 350 - is one of the standard models within a range of
well proven dismountable cutter suction dredgers. There are several options possible or even the
design can be modified to specific wishes in meeting any operational requirement.
DAMEN CUTTER SUCTION DREDGER 350 DAMEN CUTTER SUCTION DREDGER 350
GENERAL ARRANGEMENT PRODUCTION CURVES
Min/ max dredging depth 1/ 9 m (cutterladder angle of 5/45º) Length o.a. incl. ladder and spudkeepers 25.00 m
Dredging width at 40º swing angle 27 m (at max dredging depth) Length over pontoons 16.00 m
Maximum mixture capacity 2000 m3/hr Beam o.a. 6.05 m
Depth 1.50 m
DREDGE INSTALLATION Draught (100 % filled bunkers) approx. 1.10 m
Air draught (spuds removed/ ladder up) approx. 4.70 m
Dredge pump type BP3530MD Total weight approx. 55 ton
Impeller design high efficiency, double vane, 4 bladed
Impeller diameter / width / spherical passage 80 / 175 / 150 mm TANK CAPACITIES
Diameter suction- and discharge pipe 350 mm
Cutter 5- bladed, diameter: 1150 mm Fuel oil approx. 2 x 4 m3 (for ± 100 running hours)
Cutter power 55 kW Ballast water (fore and aft) 2 x 3 m3 and 2 x 3 m3
Cutter speed 0-9-18-36 rpm
Mooring system two spud poles and two swing winches DECK MACHINERY