Professional Documents
Culture Documents
GF7050V-M 7 SE BIOS M Anual
GF7050V-M 7 SE BIOS M Anual
GF7050V-M 7 SE BIOS M Anual
1 Main Menu...............................................................................................3
2 Advanced Menu.......................................................................................7
3 PCIPnP Menu........................................................................................19
4 Boot Menu..............................................................................................23
5 Chipset Menu.........................................................................................26
6 Performance Menu...............................................................................30
7 Exit Menu...............................................................................................33
i
GF7050V-M7 SE BIOS Manual
BIOS Setup
Introduction
T he purpose of this manual is to describe the settings in the AMI BIOS Setup
program on this motherboard. The Setup program allows users to modify the basic
system configuration and save these settings to CMOS RAM. T he power of CMOS
RAM is supplied by a battery so that it retains the Setup information when the power
is turned off.
Basic Input-Output System (BIOS) determines what a computer can do without
accessing programs from a disk. T his system controls most of the input and output
devices such as keyboard, mouse, serial ports and disk drives. BIOS activates at the
first stag e o f the booting process, loading and executing the operating system. Some
additional features, such as virus and password prot ection or chipset fine-tuning
options are also included in BIOS.
T he rest of this manual will to guide you through the options and settings in BIOS
Setup.
APM Support
T his AMI BIOS supports Version 1.1&1.2 of the Advanced Power Management
(APM) speci fication. Power management features are implemented via the System
Management Int errupt (SMI). Sleep and Suspend power man agement modes are
supported. Power to the hard disk drives and video monitors can also be managed by
this AMI BIOS.
ACPI Support
AMI ACPI BIOS support Version 1.0b of Advanced Configuration and Power
interface specifi cation (ACPI). It provides ASL code for pow er manag ement and
device con figuration capabilities as defined in the ACPI specification, developed by
Microso ft, Intel and T oshiba.
1
GF7050V-M7 SE BIOS Manual
DRAM S upport
DDR2 SDRAM (Double Data Rate II Synchronous DRAM) is supported.
Supported CP Us
T his AMI BIOS supports the Intel CPU.
Using Setup
When starting up the computer, press
<Del> during the Power-On Self-Test
(POST) to enter the BIOS setup utility.
In the BIOS setup utility, you will see
General Help description at the top right
corner, and this is providing a brief General Help
description of the selected item.
Navigation Keys for that particular menu Navigation Keys
are at the bottom right corner, and you can
use these keys to select item and ch ange
the settings.
Notice
z T he default BIOS settings apply for most conditions to ensure optimum performan ce
of the motherboard. If the system becomes unstable after changing any settings,
please load the default settings to ensure system’s compatibility and stability. Use
Load Setup Default under the Exit Menu.
z For better system perform ance, the BIOS firmware is being continuously updated.
T he BIOS information described in this manual is for your reference only. The actual
BIOS information and settings on board may be slightly different from this manual.
z T he content of this manual is subject to be chang ed without notice. We will not be
responsible for any mistakes found in this user’s manual and any system damage that
may be caused by wrong-settings.
2
GF7050V-M7 SE BIOS Manual
1 Main Menu
Once you enter AMI BIOS Setup Utility, the Main Menu will appear on the screen
providing an overview of the basic system inform ation.
BIOS SETU P U TILITY
Main Advan ced PCIPnP Boot Chipset Performance Exit
AMI BIOS
Shows system information including BIOS version, built date, etc.
System Memory
Shows system memory size, VGA shard memory will be excluded..
System Time
Set the system internal clock.
System Date
Set the system date. Note that the ‘Day’ automatically changes when you set the
date.
Floppy A
Select the type of floppy disk drive installed in your system.
Options: 360K, 5.25 in / 1.2M, 5.25 in / 720K, 3.5 in / 1.44M, 3.5 in /
2.88M, 3.5 in / None
3
GF7050V-M7 SE BIOS Manual
IDE Configuration
T he BIOS will automatically detect the presence of ID E/SAT A devices. There is a
sub-menu fo r each IDE/SAT A device. Select a device and press <Enter> to enter
the sub-menu of detailed options.
4
GF7050V-M7 SE BIOS Manual
nVidia RAID Setup
BIOS SETU P U TILITY
Main
S elect Screen
S elect Item
+- C hange Option
F1 G eneral Help
F10 S ave and Exit
ESC E xit
T he BIOS detects the information and values of resp ective devices, and these
information and values are shown below to the name of the sub-menu.
5
GF7050V-M7 SE BIOS Manual
Type
Select the type of the IDE/SAT A drive.
Options: Auto (Default) / CDROM / ARMD / Not Installed
LBA/Large Mode
Enable or disable the LBA mode.
Options: Auto (Default) / Disabled
PIO Mode
Select the PIO mode.
Options: Auto (Default) / 0 / 1 / 2 / 3 / 4
DMA Mode
Select the DMA mode.
Options: Auto (Default) / Disabled
S.M.A.R.T
Set the Smart Monitoring, Analysis, and Reporting T echnology.
Options: Auto (Default) / Disabled / Enabled
6
GF7050V-M7 SE BIOS Manual
2 Advanced Menu
T he Advanced Menu allows you to configu re the settings of CPU, Super I/O, Power
Management, and other system devices.
Notice
z Beware of that setting inappropriate values in items of this menu may cause
system to malfunction.
BIOS SETU P U TILITY
Main Advan ced PCIPnP Boot Chipset Performance Exit
CPU Configuration
T his item shows the CPU information that the BIOS automatically detects.
BIOS SETU P U TILITY
Advan ced
Configure adva nced CPU settings This should be enabled
Module Version :3F.08 in order to enable or
Manufacturer:I ntel disable the Hardware
Prefetcher Disable
Frequency : Feature.
FSB Speed :
Cache L1 :
Cache L2 :
Ratio Actual V alue:
Hardware Prefe tcher [En abled]
Adjacent Cache Line Prefetch [En abled]
Max CPUID Valu e Limit [Di sabled] S elect Screen
Intel(R) Virtu alization Tech [En abled] S elect Item
Execute-Disabl e Bit Capability[En abled] +- C hange Option
Core Multi-Pro cessing [En abled] F1 G eneral Help
Intel(R) Speed Step(tm) tech [En abled] F10 S ave and Exit
ESC E xit
7
GF7050V-M7 SE BIOS Manual
Hardware Prefetcher
T he processor has a hardw are prefetch er that automatically analy zes its requirements
and prefetches dat a and instructions from the memory into the Level 2 cache that are
likely to be required in the near future. T his reduces the latency associated with
memory reads.
Options: Enabled (Default) / Disabled
Core Multi-Processing
T his item allows multi-processing fun ction for multi-core processors.
Options: Enabled (Default) / Disabled
8
GF7050V-M7 SE BIOS Manual
Intel(R) SpeedStep(tm) Tech
T his item allows you to enable SpeedStep technology for better power saving.
SpeedStep is a technology built into some Intel processors that allows the clock
speed o f the processor to be dynamically changed by software.
Options: Enabled (Default) / Disabled
SuperIO Configuration
BIOS SETU P U TILITY
Advan ced
S elect Screen
S elect Item
+- C hange Option
F1 G eneral Help
F10 S ave and Exit
ESC E xit
9
GF7050V-M7 SE BIOS Manual
Parallel Port Mode
T his item allows you to determine how the parallel port should function.
Options: Normal (Default) Using Parallel port as Standard Printer Port.
EPP Using Parallel Port as Enhanced Parallel Port.
ECP Using Parallel port as Extended Capabilities Port.
ECP+EPP Using Parallel port as ECP & EPP mode.
Mouse PowerOn
T his item allows you to control the mouse power on function.
Options: Disabled (Default) / Enabled
10
GF7050V-M7 SE BIOS Manual
Shutdow n Temperature
T his item allows you to set up the CPU shutdown T emperature. This item is only
effective under Windows 98 ACPI mode.
Options: Disabled (Default) / 60℃/140℉ / 65℃/149℉ / 70℃/158℉ / 75℃/167℉
/ 80℃/176℉ / 85℃/185℉ / 90℃/194℉
11
GF7050V-M7 SE BIOS Manual
S elect Screen
S elect Item
+- C hange Option
F1 G eneral Help
F10 S ave and Exit
ESC E xit
Control Mode
T his item provides several operation modes of the fan.
Options: Quiet / Performan ce / Manual
12
GF7050V-M7 SE BIOS Manual
Fan Ctrl Start Value
When CPU/System temperature arriv es to the set value, the CPU/System fan will
work under Smart Fan Function mode.
Options: 0~127 (℃)
Power Configuration
BIOS SETU P U TILITY
Advan ced
13
GF7050V-M7 SE BIOS Manual
Chipset ACPI Configuration
BIOS SETU P U TILITY
Advan ced
S elect Screen
S elect Item
+- C hange Option
F1 G eneral Help
F10 S ave and Exit
ESC E xit
Suspend mode
T he item allows you to select the suspend type under the ACPI operating system.
Options: S1 (POS) (Default) Power on Suspend
S3 (ST R) Suspend to RAM
Auto POS+STR
14
GF7050V-M7 SE BIOS Manual
ACPI APIC support
T his item is used to enable or disable the motherboard's APIC (Advan ced
Programmable Interrupt Controller). T he APIC provides multiprocessor support,
more IRQs and faster interrupt handling.
Options: Enabled (Default) / Disabled
Headless mode
T his is a server-speci fic feature. A headless server is one that operates without a
keyboard, monitor or mouse. To run in headless mode, both BIOS and operating
system (e.g. Windows Server 2003) must support headless operation.
Options: Disabled (Default) / Enabled
Resume On PME#
When you select Enabled, a PME signal from PCI card returns the system to Full ON
state.
For this function to work, you may need a LAN add-on card which supports the
Wake on LAN function. Set the Wake on LAN (WOL) jumper on motherboard to
enable i f applicable.
Options: Disabled (Default) / Enabled
Resume On LAN(MAC)
T his item allows you to enable or disable Wake On LAN from Soft-O ff fun ction.
Options: Disabled (Default) / Enabled
15
GF7050V-M7 SE BIOS Manual
Resume On Ring
T his item allows you control the wake on ring function.
Options: Disabled (Default) / Enabled
System Time
You can choose the system boot up time, input hour, minute and second to specify.
Note: If you have change the setting, you must let the system boot up until it
goes to the operating system, before this function will work.
16
GF7050V-M7 SE BIOS Manual
USB Configuration
T his item shows the USB controller and using USB device information.
BIOS SETU P U TILITY
Advan ced
17
GF7050V-M7 SE BIOS Manual
USB Mass Storage Dev ice Configuration
BIOS SETUP UTILITY
Advanced
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Emulation Type
T his item allows you to select the emulation type of the USB mass storage device.
Options: Auto (Default) / Floppy / Forced FDD / Hard Disk / CDROM
18
GF7050V-M7 SE BIOS Manual
3 PCIPnP Menu
T his section describes con figuring the PCI bus system. PCI, or Personal Computer
Interconn ect, is a system which allows I/O devices to operate at speeds nearing the
speed o f the CPU itself uses when communicating with its own special components.
Notice
z Beware of that setting inappropriate values in items of this menu may cause
system to malfunction.
BIOS SETU P U TILITY
Main Advan ced PCIPnP Boot Chipset Performance Exit
Clear NV RAM
T his item allows you to clear the data in the NVRAM (CMOS) by selecting “Yes”.
Options: No (Default) / Yes
19
GF7050V-M7 SE BIOS Manual
Palette Snooping
Some old graphic controllers need to “ snoop” on the VGA palette and then map it to
their display as a way to provide boot information and VGA compatibility. This item
allows such snooping to take place.
Options: Disabled (Default) / Enabled
20
GF7050V-M7 SE BIOS Manual
PCI Resource
BIOS SETUP UTILITY
PCIPnP
PCI Resource
Available: Specified
IRQ3 [Available] IRQ is available to be
IRQ4 [Available] used by PCI/PnP
IRQ5 [Available] devices.
IRQ7 [Available] Reserved: Specified
IRQ9 [Available] IRQ is reserved for
IRQ10 [Available] use by Legacy ISA
IRQ11 [Available] devices.
IRQ14 [Available]
IRQ15 [Available]
DMA Channel 0 [Available] Select Screen
DMA Channel 1 [Available] Select Item
DMA Channel 3 [Available] +- Change Option
DMA Channel 5 [Available] F1 General Help
DMA Channel 6 [Available] F10 Save and Exit
DMA Channel 7 [Available] ESC Exit
Reserved Memory Size [Disabled]
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
IRQ3/4/5/7/9/10/11/14/15
T hese items will allow you to assign each system interrupt a type, depending on the
type of device using the interrupt. T he option “Available” means the IRQ is going
to assign automatically.
Options: Available (Default) / Reserved
21
GF7050V-M7 SE BIOS Manual
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
22
GF7050V-M7 SE BIOS Manual
4 Boot Menu
T his menu allows you to setup the system boot options.
Removable Drives
T he BIOS will attempt to arrange the removable drive boot sequence automatically.
You can also change the booting sequence. The number of device items that
appears on the screen depends on the number of devices installed in the system.
23
GF7050V-M7 SE BIOS Manual
CD/DV D Drives
T he BIOS will attempt to arrange the CD/DVD drive boot sequence automatically.
You can also change the booting sequence. The number of device items that
appears on the screen depends on the number of devices installed in the system.
Quick Boot
Enabling this option will cause an ab ridged version o f the Power On Sel f-T est
(POST ) to execute after you power up the computer.
Options: Enabled (Default) / Disabled
Quiet Boot
T his BIOS feature determines if the BIOS should hide the normal POST messages
with the motherboard or system manufacturer's full-screen logo.
Options: Disabled (Default) / Enabled
Bootup Num-Lock
Selects the NumLock State after the system switched on.
Options: ON (Default) / OFF
24
GF7050V-M7 SE BIOS Manual
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When set
to Enabled, this item allows the option ROMs to trap interrupt 19.
Options: Disabled (Default) / Enabled
25
GF7050V-M7 SE BIOS Manual
5 Chipset Menu
T his submenu allows you to configure the speci fic features of the chipset installed on
your system. T his chipset manage bus speeds and access to system memory
resources, such as DRAM. It also coordinates communications with the PCI bus.
Notice
z Beware of that setting inappropriate values in items of this menu may cause
system to malfunction.
BIOS SETU P U TILITY
Main Advan ced PCIPnP Boot Chipset Performance Exit
26
GF7050V-M7 SE BIOS Manual
S elect Screen
S elect Item
+- C hange Option
F1 G eneral Help
F10 S ave and Exit
ESC E xit
27
GF7050V-M7 SE BIOS Manual
AZALIA AUDIO
T his item allows you to control the onboard codec and on-chip codec.
Options: Internal codec+E (Default) / Internal codec / External codec / Disabled
28
GF7050V-M7 SE BIOS Manual
MAC ID Information
T his item shows the onboard LAN MAC ID.
Onboard LAN
T his option allows you to control the onboard LAN.
Options: Auto (Default) / Disabled
29
GF7050V-M7 SE BIOS Manual
6 Performance Menu
T his submenu allows you to change voltage and clock of various devices.
(Howev er, we suggest you to use the default setting. Changing the voltage and clock
improperly may damage the device.)
Notice
z Beware of that setting inappropriate values in items of this menu may cause
system to malfunction.
BIOS SETU P U TILITY
Main Advan ced PCIPnP Boot Chipset Performance Exit
CPU BS EL Select
T his item allows you to select the CPU Frequency.
Options: Auto (Default) / FSB-1066 / FSB-533 / FSB-800 / FSB-1333
30
GF7050V-M7 SE BIOS Manual
CPU Overvoltage
T his item allows you to select CPU Voltage Control.
Options: 100% (Default) / 103.3% / 106.6% / 110.0%
Memory Overvoltage
T his item allows you to select DDR Voltage Control.
Options: 1.95V (Default) / 2.05V / 2.15V / 2.20V / 2.25V / 2.30V / 2.40V / 2.50V
Chipset Overvoltage
T his item allows you to select NB/SB Voltage Control.
Options: 100% (Default)
VTT Overvoltage
T his item allows you to select VTT Voltage Control.
Options: 100% (Default)
Memory Timings
T his item allows you to control the memory timings.
Options: Auto (Default) / Manual
tRCD
Options: Auto (Default) / 3 CLK ~ 6 CLK
31
GF7050V-M7 SE BIOS Manual
tRP
Options: Auto (Default) / 3 CLK ~ 6 CLK
tRAS
Options: Auto (Default) / 5 CLK ~ 18 CLK
tRRD
Options: Auto (Default) / 2 CLK ~ 5 CLK
tRC
Options: Auto (Default) / 11 CLK ~ 26 CLK
tWR
Options: Auto (Default) / 3 CLK ~ 6 CLK
tWTR
Options: Auto (Default) / 1 CLK ~ 3 CLK
tREF
Options: Auto (Default) / 7.8 us / 3.9 us
Burst Length
Options: Auto (Default)
32
GF7050V-M7 SE BIOS Manual
7 Exit Menu
T his menu allows you to load the optimal default settings, and save or discard the
changes to the BIOS items.
BIOS SETU P U TILITY
Main Advan ced PCIPnP Boot Chipset Performance Exit
Discard Changes
Abandon all changes made during the current session and restore the previously
saved values.
33
GF7050V-M7 SE BIOS Manual
Security
T his sub-menu allows you to provide/revise supervisor and user password.
BIOS SETU P U TILITY
Exit
34
GF7050V-M7 SE BIOS Manual
Passw ord Check
T his item is for setting the timing that checking password.
Options: Setup (Default) / Always
35