Professional Documents
Culture Documents
MaterialData - 77934 - Carbon Fiber Filled
MaterialData - 77934 - Carbon Fiber Filled
Categories: Polymer; Thermoplastic; Polyketone; Polyetheretherketone (PEEK); Polyetheretherketone, PEEK, Carbon Fiber Filled
Material This property data is a summary of similar materials in the MatWeb database for the category "Polyetheretherketone, Carbon Fiber Filled". Each property
Notes: range of values reported is minimum and maximum values of appropriate MatWeb entries. The comments report the average value, and number of data points
used to calculate the average. The values are not necessarily typical of any specific grade, especially less common values and those that can be most affected
by additives or processing methods.
Vendors: With over 30 years of focus, experience and security of supply Victrex Polymer Solutions is the world’s leading manufacturer of high performance
Polyaryletherketones (PAEK) including versatile VICTREX™ PEEK. We work with our customers and end users to deliver technology driven solutions to meet
the challenges and opportunities they face and help them to achieve new levels of cost savings, quality and performance. Visit www.victrex.com, call (800)
VICTREX /1-484-342-6001, or email victrexplc@victrex.com.
Ensinger TECAPEEK™ shapes are manufactured exclusively with Victrex™ PEEK polymer. The Ensinger process and Victrex resins ensure reliability,
consistency, dimensional stability, and high temperature mechanical performance.
Please click here if you are a supplier and would like information on how to add your listing to this material.
Physical Properties Metric English Comments
Density 1.32 - 1.90 g/cc 0.0477 - 0.0686 lb/in³ Average value: 1.44 g/cc Grade Count:158
Filler Content 10.0 - 60.0 % 10.0 - 60.0 % Average value: 28.8 % Grade Count:47
Water Absorption 0.0180 - 0.500 % 0.0180 - 0.500 % Average value: 0.118 % Grade Count:44
Moisture Absorption at Equilibrium 0.0600 - 0.160 % 0.0600 - 0.160 % Average value: 0.104 % Grade Count:17
0.180 - 0.220 % 0.180 - 0.220 % Average value: 0.207 % Grade Count:3
@Temperature 70.0 - 70.0 °C @Temperature 158 - 158 °F
Water Absorption at Saturation 0.0530 - 0.400 % 0.0530 - 0.400 % Average value: 0.277 % Grade Count:21
0.350 - 0.500 % 0.350 - 0.500 % Average value: 0.445 % Grade Count:10
@Temperature 100 - 100 °C @Temperature 212 - 212 °F
Additive Loading 10.0 - 40.0 % 10.0 - 40.0 % Average value: 25.5 % Grade Count:11
Viscosity 550 - 850000 cP 550 - 850000 cP Average value: 191000 cP Grade Count:12
@Temperature 400 - 420 °C @Temperature 752 - 788 °F
150 - 920 cP 150 - 920 cP Average value: 191000 cP Grade Count:7
@Temperature 400 - 400 °C @Temperature 752 - 752 °F
150 - 920 cP 150 - 920 cP Average value: 191000 cP Grade Count:7
@Shear Rate 1000 - 1000 1/s @Shear Rate 1000 - 1000 1/s
Linear Mold Shrinkage 0.000 - 0.00700 cm/cm 0.000 - 0.00700 in/in Average value: 0.00151 cm/cm Grade Count:99
0.00300 - 0.00300 cm/cm 0.00300 - 0.00300 in/in Average value: 0.00300 cm/cm Grade Count:1
@Temperature 180 - 180 °C @Temperature 356 - 356 °F
Linear Mold Shrinkage, Transverse 0.00250 - 0.0170 cm/cm 0.00250 - 0.0170 in/in Average value: 0.00659 cm/cm Grade Count:32
0.00700 - 0.00700 cm/cm 0.00700 - 0.00700 in/in Average value: 0.00700 cm/cm Grade Count:1
@Temperature 180 - 180 °C @Temperature 356 - 356 °F
Melt Flow 1.10 - 50.0 g/10 min 1.10 - 50.0 g/10 min Average value: 14.9 g/10 min Grade Count:18
Spiral Flow 6.50 - 100 cm 2.56 - 39.4 in Average value: 23.1 cm Grade Count:11
Mechanical Properties Metric English Comments
Hardness, Rockwell M 80.0 - 125 80.0 - 125 Average value: 103 Grade Count:28
Hardness, Rockwell R 117 - 124 117 - 124 Average value: 120 Grade Count:7
Hardness, Shore D 78.0 - 94.0 78.0 - 94.0 Average value: 88.7 Grade Count:35
Ball Indentation Hardness 312 - 440 MPa 45300 - 63800 psi Average value: 359 MPa Grade Count:3
Tensile Strength, Ultimate 51.7 - 2900 MPa 7500 - 420000 psi Average value: 257 MPa Grade Count:146
35.0 - 2826.85 MPa 5080 - 410001 psi Average value: 385 MPa Grade Count:16
@Temperature -55.0 - 275 °C @Temperature -67.0 - 527 °F
Tensile Strength, Yield 86.2 - 2070 MPa 12500 - 300000 psi Average value: 355 MPa Grade Count:21
Elongation at Break 0.300 - 7.00 % 0.300 - 7.00 % Average value: 1.89 % Grade Count:153
0.860 - 2.50 % 0.860 - 2.50 % Average value: 1.40 % Grade Count:6
@Temperature -55.0 - 177 °C @Temperature -67.0 - 351 °F
Elongation at Yield 1.20 - 7.00 % 1.20 - 7.00 % Average value: 2.29 % Grade Count:8
Modulus of Elasticity 1.00 - 172 GPa 145 - 24900 ksi Average value: 24.8 GPa Grade Count:142
2.55 - 172 GPa 370 - 24900 ksi Average value: 54.9 GPa Grade Count:6
@Temperature -55.0 - 177 °C @Temperature -67.0 - 351 °F
Flexural Yield Strength 48.3 - 2170 MPa 7000 - 315000 psi Average value: 332 MPa Grade Count:138
45.0 - 2413.17 MPa 6530 - 350001 psi Average value: 444 MPa Grade Count:13
@Temperature -55.0 - 275 °C @Temperature -67.0 - 527 °F
Flexural Modulus 4.83 - 159 GPa 700 - 23100 ksi Average value: 21.4 GPa Grade Count:137
6.55002 - 159 GPa 950.015 - 23100 ksi Average value: 77.7 GPa Grade Count:3
@Temperature -55.0 - 177 °C @Temperature -67.0 - 351 °F
Flexural Strain at Break 1.30 - 4.20 % 1.30 - 4.20 % Average value: 2.34 % Grade Count:28
Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or
engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your
calculations to minimize rounding error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into
MatWeb.