Professional Documents
Culture Documents
Pdms Setup Mds - Pdms Macro
Pdms Setup Mds - Pdms Macro
| PDMS Macro
PDMS Macro
08 MAY
1. Open PDMS, select the project (example SAM) and go to Admin module.
2. Create 2 teams namely MDS and MDU, put the SYSTEM user to MDS and MDU team.
3. Include following databases (as a minimum) from MDS project (use username SYSTEM, password
XXXXXX)
a. MDS/CATA
b. MDS/DESITMPL-AISC
c. MDS/DESITMPL-GRI
d. MDS/DRAFT
e. MDS/MDSAPPDEFAULTS
f. MDS/PROP
g. MDS/WELDS
4. Include the following database from MDU project
a. MDU/CATA
5. Include the databases mentioned earlier to desired MDB.
6. Copy following file from MDSDFLTS folder (the folder under MDS project directory) to defaults
project folder (SAMDFLTS, under the SAM project directory). Forget to copy these files and you’ll
get errors.
a. DES-SUPP-NAMES
b. DRA-SUPP-DEFS
c. MDS-REPORT-DEFS
d. MdsUserData.pmldat
7. Go to Paragon and activate required MDS supports.
8. Go to Design and create Zones with purpose SUPP
6 Comments
Posted by pdmsmacro on May 8, 2014 in PDMS Training and Knowledge
mehdi
https://pdmsmacro.wordpress.com/2014/05/08/how-to-setup-mds/ 1/3
01/07/2020 How to Setup MDS? | PDMS Macro
Reply
Raalingeswara Reddy
Reply
tifatul sembiring
Hi Pak,
what are the possible reasons why I can’t identify tube of datum pipe when trying to create datum
pipe for MDS support?
Thanks.
Reply
pdmsmacro
Reply
Ramalingeswara reddy
Reply
pdmsmacro
Reply
Blog at WordPress.com.
https://pdmsmacro.wordpress.com/2014/05/08/how-to-setup-mds/ 2/3
01/07/2020 How to Setup MDS? | PDMS Macro
https://pdmsmacro.wordpress.com/2014/05/08/how-to-setup-mds/ 3/3