Lanyard Tutorial: Sew Spoiled

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

www.sewspoiled.blogspot.

com

Lanyard Tutorial
By Leah Williams

Sew Spoiled
www.sewspoiled.blogspot.com

1
www.sewspoiled.blogspot.com

Materials: Fabric measuring 2”X 44” and one 1.5” swivel hook.

Step 1: Cut a stripe of fabric measuring 2”X44”. In one quarter of a yard of fabric
(9”X44”) you could make 4 Lanyards!

Step 2: Iron the fabric in half, then open the fold and iron the raw edges
toward the center crease. (It looks a little like bias tape.)

2
www.sewspoiled.blogspot.com

Step 3: Sew a 1/4” seam allowance along the open side of the lanyard.

Step 4: Attach the 1.5” swivel hook. Pin the two raw edges together, make sure the
lanyard is not twisted. Sew across the raw edges several times.

3
www.sewspoiled.blogspot.com

Step 5: Cut approximately 1/8” from the seam, as close as you can without taking
any stitching out. Flip the Lanyard!

Step 6: Sew as close to the swivel hook as possible to secure the hook in place.

You might also like