3G MLB - FOACLuser Report

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 23

3G MLB -

Surabaya
By Sachin Kumar

1
MLB Algorithm

2
3G MLB Algorithm

Proprietary & Confidential 3


3G MLB CPICH Adjustment

Proprietary & Confidential 4


MLB 3G
QRxLevMin Algorithm
➢ Decision on QRxlevmin performed only when RTWP exceeds allowable Noise Rise
➢ Qrxlevmin adjustment forces cell edge users to re-select a different layer or cells preventing
them from creating more interferences and reducing their access failures

RTWP Normal
Center UE Cell Edge UE
Path Loss Low High
UL Interference Normal Normal

UL UE Initial Tx Power Low Normal

UL UE Initial Power = f(Path Loss, UL Interference)

RTWP High
Center UE Cell Edge UE
Path Loss Low High
UL Interference High High

UL UE Initial Tx Power Normal High


• Even more Interferences
• Increased Access Failures5
(UE reaching Max Tx Power)
MLB 3G
QHyst2 Algorithm
• QHYST2 Adjustments is proactive LB

LOAD CLASSIFICATION

LOADED NORMAL UNLOADED

QHYST2=0 QHYST2=2 QHYST2=4

Easier Delayed
reselection of reselection of
neighbors neighbors

6
Open Loop Analysis
Huawei –3G MLB FOA Cluster- Surabaya
➢ Encircled – RNC10

➢ Cells Count – 225

➢ Active- 195

➢ Amount of UMTS Carriers in cluster - 3 :

DL-UARFCN Count
10638 65
10663 65
10688 65

Proprietary & Confidential 8


Load Classification(%)
Load Classification
100.00%
90.00%
80.00%
70.00%
60.00%
50.00%
40.00%
30.00%
20.00%
10.00%
0.00%
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21
Excluded MLB Hours due to less traffic 31-05-2020
LOADED NORMAL UNLOADED

Load Classification thresholds →

➢ At peak hours maximum of 28% network is loaded with defined thresholds 9

9
HS User vs Available HS Power

➢ When 16 users connected at same moment cells considered as loaded.


10

Proprietary & Confidential 10


Congestion Classification
Congestion Classification
250

200

150
NO_CONGESTION
CONGESTION_VERY_HIGH
100 CONGESTION_LOW
CONGESTION_HIGH

50

0
15 16 17 18 19 20 21 22 23 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
27-05-2020 28-05-2020

Congestion thresholds →

➢ No significant congestion in network.


➢ Only few cells having congestion at busy hours distribution on count level at next slide
11

Proprietary & Confidential 11


Congested cells Distribution only
Congestion Classification
10
9
8
7
6
5 CONGESTION_VERY_HIGH

4 CONGESTION_LOW

3 CONGESTION_HIGH

2
1
0
16 17 19 20 21 22 9 10 11 12 13 14 15 16 17 18 19 20 21
27-05-2020 28-05-2020

Congestion thresholds →

➢ Less than 10 cells congested in cluster wide in particular hour and usually meeting very high congestion threshold
12

Proprietary & Confidential 12


RTWP Classification
250
RTWP - Classification

200

150

RTWP_NORMAL
100
RTWP_HIGH

50

0
15 16 17 18 19 20 21 22 23 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
27-05-2020 28-05-2020

Ul Interference Threshold→

➢ 10 to 20% cells reaching the High RTWP threshold (-100).


➢ Distribution in next slides 13

Proprietary & Confidential 13


RTWP Distribution
RTWP Distribution
120.00%

100.00%

80.00%
-52--46

60.00% -88--82
-94--88
40.00% -100--94
-106--100
20.00%

0.00%
15 16 17 18 19 20 21 22 23 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
27-05-2020 28-05-2020

14

Proprietary & Confidential 14


Qhyst2 Change Summary

Qhyst 2 Change Summary


100.00%
90.00%
80.00%
70.00%
60.00%
50.00% 4
40.00% 2
30.00%
0
20.00%
10.00%
0.00%
00 01 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21
31-05-2020

15
Proposed Min & Max Value Proposed - FOA Cluster -225 Cells
✓ CPICH Play Range on task level as per below range to accommodate all
the cells of cluster .
Max TX Power
Cpich 442 460
CPICH Value
280 1
Max Power Max Val MinVal
300 8
442 360 310
313 22
460 370 310 330 9 13
340 3

✓ Dual Carrier Same CPICH applied to 2100 Co- Sector 342 21 19


10638 350 6
10663
360 114
10688
370 9

16
Proposed Min & Max Value Proposed - RNC_Kebalen1
Max Tx power
CPICH 190 400 430 442 460 480
90 44
✓ Below table as per Task setting 280 3
300 24
308 11
310 7 1
CPICH Value 313 15 33
320 3 6
MaxPower Max Val Min Val 326 3
400 318 310 327 4
330 3 3 42 157 1
430 348 310 334 3
337 3
442 360 310
338 3 6
460 370 310 340 6 27
342 142 157
480 370 330 345 65
347 11
350 78 12
351 15
354 9 15
360 3 15 660 58
370 123
372 14
375 9
17
376 3
QrxLevMin

✓ qRxLev Min uniform through cluster wide → -115

✓ Suggested Range

✓ Min → - 115

✓ Max → - 109

Qhyst2
✓Optimized values as per Load conditions
✓ 0
✓ 2
✓ 4

18
MLB Settings

Enforce same CPICH step for all 3 carrier.

19
MLB Task Settings
➢ NO CPICH Power Change for Cells classified as NORMAL

➢ CPICH Power Increase for Cells classified as Unloaded

➢ CPICH Power Decrease for Cells classified as Loaded

➢ CPICH Power Decrease for Cells classified as very high congested

➢ Min/Max Relative CPICH as per audit

20

Proprietary & Confidential 20


Next Step → Single Site Provisioning approval any one
Site 1 Site 2
• SBY245MW1_TAMBAKWEDIBARUMCMEMW1
• SBY245MW1_TAMBAKWEDIBARUMCMEMW2 • SBX041MW1_BULAKBANTENGTIMURDMTMW1

• SBY245MW1_TAMBAKWEDIBARUMCMEMW3 • SBX041MW1_BULAKBANTENGTIMURDMTMW2

• SBY245MX1_TAMBAKWEDIBARUMCMEMX1 • SBX041MW1_BULAKBANTENGTIMURDMTMW3
• SBX041MX1_BULAKBANTENGTIMURDMTMX1
• SBY245MX1_TAMBAKWEDIBARUMCMEMX2
• SBX041MX1_BULAKBANTENGTIMURDMTMX2
• SBY245MX1_TAMBAKWEDIBARUMCMEMX3
• SBX041MX1_BULAKBANTENGTIMURDMTMX3
• SBY245MZ1_TAMBAKWEDIBARUMCMEMZ1
• SBX041MZ1_BULAKBANTENGTIMURDMTMZ1
• SBY245MZ1_TAMBAKWEDIBARUMCMEMZ2
• SBX041MZ1_BULAKBANTENGTIMURDMTMZ2
• SBY245MZ1_TAMBAKWEDIBARUMCMEMZ3
• SBX041MZ1_BULAKBANTENGTIMURDMTMZ3

➢ Seeking Approval for Single Site Execution on above cells to test the provision rights & Provisioning commands
pushed toward OSS.
21
Conclusion
✓ CPICH Audit →
▪ All active 3 carrier have similar CPICH for Co-sector.
▪ Allow Dual carrier Configuration enabled for 2100 Band
▪ By Keeping Min Cpich 30 & Max 37 It can cover 99.9% of cells

✓ Less Congested cells


▪ Less than 10 cells observed as congested with defined threshold (1% -High)
▪ Power down of step 1 dbm configured for very high congested cells

✓ Load classification based on:


▪ HS power
▪ Code Power
▪ Power step down 0.5 db for loaded
▪ While 0.5 db step up for unloaded cells.
▪ No power change of Normal Classified cells.

✓ Qrxlevmin changes suggested for High RTWP Cells


✓ Qhyst2 Changes suggest as per load conditions
✓ 1 AM to 8AM Module will be off as no significant traffic load between these hours

✓ Single Site proposed test on any of below 2 sites as a NEXT STEP


➢ SBY245MW1_TAMBAKWEDIBARUMCME
➢ SBX041MW1_BULAKBANTENGTIMURDMT
22

Proprietary & Confidential 22


23

You might also like