Professional Documents
Culture Documents
Waterproofing Catalogue: Parchem Construction Supplies
Waterproofing Catalogue: Parchem Construction Supplies
Waterproofing Catalogue: Parchem Construction Supplies
WATERPROOFING CATALOGUE
The complete range of products and solutions for the waterproofing contractor....
CONTENTS
Primers 4-5
Patching Compounds 5
Liquid Applied Membranes 5-6
Tile Adhesive 7
Liquid Applied Accessories 7
Self Adhesive Membranes 7
Pre-applied Membrane & Accessories 7-8
Torch Applied Accessories 8
Torch Applied Membranes 9-10
Cementitous Membranes 10-11
Adhesives 11
Sealants 11-12
Concrete Jointing 13
Waterstops 13
Concrete Repair 13
Industrial Flooring 14
Tools & Equipment 15-19
stencil
Waterproofing Industry I 3
PRIMERS primers
Primer 4 Uses
Used on non porous surfaces with Thioflex 600 GG & Emer-Proof SBR Primer is a single component fast drying
Thioflex 600 PG. primer that provides excellent high bonding and penetrating
properties into concrete and masonry surfaces. In addition to
Part ID Description its priming properties (for Emer-Proof 250), Emer-Proof SBR
665207 PRIMR NO.4 250ML Primer can also be used as a waterproofing additive for cement
based products to enhance adhesion, water resistance and
compressive strength.
Primer 7
Used on porous surfaces with Thioflex 600 PG / GG Part ID Description
& Colpor 200 PF.
74326 0 EMER-PROOF SBR PRIMER
Part ID Description
665209 PRIMER NO.7 1L
Emer-Acrylic Sealer
Primer 9 Economical, water based concentrate and masonry
Used on plastics with Hilastic. Other sealants after primer.
testing.
Uses
Part ID Description Emer-Acrylic Sealer can be used as a primer/sealer coating
665212 PRIMER NO.9 250ML on concrete, brick, tilt-up panels etc. Provides an even non
absorbent substrate over which Emer-impact, Emer-Clad
membrane systems and Emer-Acrylic Low Sheen can be
Primer 10 applied.
Used on porous surfaces with Hilastic.
Part ID Description
Primer 11
Used on non porous surfaces with Hilastic. Emer-Coat Clear Sealer
Penetrating, solvent based, clear masonry and concrete
Part ID Description binder/sealer.
665216 PRIMER NO.11 250ML
Uses
As a primer, sealer coating on fibre cement, masonry,
Primer 13 blockwork, brick or other masonry surfaces. Provides an
2 part epoxy primer - Used on porous surfaces with excellent seal over aged, weathered paintwork and will
NS 280, Emer-Seal 200; also Emer-Seal PU 40, penetrate powdery coatings such as “kalsomine” and
Thioflex 600 (PG & GG) Emer-Seal CR when sealant “distemper”.
in being immersed.
Part ID Description
Part ID Description
561017 EMER-COAT CLEAR SEALER 1L
665221 PRIMER NO.13 A-B/250ML
561018 EMER-COAT CLEAR SEALER 4L
561019 EMER-COAT CLEAR SEALER 20L
Primer 21
Used on porous surfaces with Emer-Seal PU 25 &
Emer-Seal PU 40 if required.
Emer-Bond
Part ID Description Waterborne, anti-corrosive primer.
665228 PRIMER NO.21 250ML
Uses
For fabrication and maintenance work generally. Suitable as
Emer-Proof WB Primer a shop primer due to its quick drying, outstanding adhesion,
Economical, water based concrete and masonry primer. good resistance to corrosion and the absence of health and
fire hazards. For application in special conditions, consult
Uses Parchem for detailed information.
Uses Uses
The versatility of Emer-Tan application makes it suitable for Emer-Impact is suitable for application to most common
small or large surfaces, inaccessible areas or wherever rust facade substrates including concrete render, flush
is present. As a surface pre-treatment for rusted structural jointed block and brickwork, fibre cement sheeting,
steel, machinery, gates, railings, marine fittings, motor tilt-up constructions and AAC blocks and panels after
vehicle floors and all rusted surfaces where the complete recommended primer/sealer application.
removal of rust is not feasible or economical.
Part ID Description
Part ID Description
561776 EMER-IMPACT A BASE 15L
561610 EMER-TAN 5L
561778 EMER-IMPACT B BASE 15L
561607 EMER-TAN 20L
561780 EMER-IMPACT C BASE 15L
561393 EMER-IMPACT TINTS 15L
A High quality, water based acrylic, low sheen coating. 561770 EMER-CLAD MATT A BASE 15L
561765 EMER-CLAD MATT B BASE 15L
Uses 561760 EMER-CLAD MATT C BASE 15L
Suitable for application to brickwork, cement render, 740015 EMER-CLAD MATT WHITE 4L
concrete, blockwork, fibre cement sheeting, plaster board 740045 EMER-CLAD MATT MID GREY 4L
and pre-primed metals. As a general purpose, high opacity, 561755 EMER-CLAD SATIN A BASE 15L
durable protective, decorative coating mainly for exterior
561750 EMER-CLAD SATIN B BASE 15L
use, but also suited for interior surfaces.
561745 EMER-CLAD SATIN C BASE 15L
740205 EMER-CLAD SATIN WHITE 4L
Part ID Description
561700 EMER-CLAD SATIN WHITE 15L
561394 EMER-ACRYLIC LOW SHEEN TINTS 15L
740220 EMER-CLAD SATIN LIGHT GREY 4L
561703 EMER-CLAD SATIN LIGHT GREY 15L
740225 EMER-CLAD SATIN MID GREY 4L
561704 EMER-CLAD SATIN MID GREY 15L
773003 EMER-PATCH SMOOTH 15L 561712 EMER-CLAD SATIN LIGHT GREEN 15L
740220 EMER-CLAD SATIN LIGHT GREY 4L
561704 EMER-CLAD SATIN MID GREY 15L
Waterproofing Industry I 5
liquid applied membranes se
Uses Uses
On timber and all types of building boards, ceiling tiles, Emer-Proof 250 is suitable for a wide range of under tile
panelling etc. Over polyurethane and styrene foam waterproofing applications such as foundations, wet areas
insulation, pipe lagging or similar it provides a fire retardant, & showers, podiums, terraces, balconies & deck areas
abrasion resistant, flexible skin that also withstands weather tiled pools & water features, water tanks and water storage
and wear. areas, including potable conditions. Also is suitable for
subterranean areas like retaining walls.
Part ID Description
561005 EMER-CLAD FIRECHECK WHITE 15L Part ID Description
743250 Emer-Proof 250 Part A
743255 Emer-Proof 250 Part B 15kg
Emer-Clad Architectural
Decorative and protective façade coating, water based
acrylic, highly durable, elastomeric, waterproofing Emer-Proof 695
membrane with full colour range. Water based fibre reinforced, flexible, fast drying,
Uses modified polyurethane, waterproofing membrane, for
under tile internal and external areas.
Emer-Clad is suitable for application to many common
substrates including concrete, render, masonry, fibrous Uses
cement products, metals, timber and bituminous
membranes. Some special priming may be required. Emer-Proof 695 has been developed for waterproofing
of internal and external under-tile applications. Such as
shower recesses, bathrooms, laundries, and balconies or
Part ID Description
terrace areas.
740040 EMER-CLAD MATT LIGHT GREY 4L
561723 EMER-CLAD MATT LIGHT GREY 15L Part ID Description
561724 EMER-CLAD MATT MID GREY 15L 734051 EMER-PROOF 695 15L
561726 EMER-CLAD MATT SANDSTONE 15L
561720 EMER-CLAD MATT WHITE 15L
561770 EMER-CLAD MATT A BASE 15L
561765 EMER-CLAD MATT B BASE 15L
561760 EMER-CLAD MATT C BASE 15L Emer-Proof 750
561719 EMER-CLAD MATT TINTS 15L High performance, tough, flexible, polyurethane
740015 EMER-CLAD MATT WHITE 4L waterproofing membrane, for internal and external
740045 EMER-CLAD MATT MID GREY 4L under tile areas.
561755 EMER-CLAD SATIN A BASE 15L
561750 EMER-CLAD SATIN B BASE 15L Uses
561745 EMER-CLAD SATIN C BASE 15L The high elasticity, excellent bond and low water
561388 EMER-CLAD SATIN TINTS 15L
permeability of Emer-Proof 750 make it ideal for a wide
range of water/vapour proofing applications such as
740205 EMER-CLAD SATIN WHITE 4L
foundations, basements, tunnels, ground floors, suspended
561700 EMER-CLAD SATIN WHITE 15L floors, roof terraces, balconies, patios, bridges, inspection
740220 EMER-CLAD SATIN LIGHT GREY 4L pits, sewage works, inverted roofs, bathrooms and wet
561703 EMER-CLAD SATIN LIGHT GREY 15L areas.
740225 EMER-CLAD SATIN MID GREY 4L
561704 EMER-CLAD SATIN MID GREY 15L Part ID Description
561706 EMER-CLAD SATIN SANDSTONE 15L 734102 EMER-PROOF 750-LV GREY 15L
Emer-Proof Ecoflex
High performance, single component, water based Emer-Proof Aqua Barrier
rubberised waterproofing membrane. Water borne epoxy membrane / barrier for porous
surfaces.
Uses
Developed for the residential & commercial construction Uses
industry. It is solvent free, non-flammable, and forms a Emer-Proof Aqua Barrier is a grey, two-component, matt
highly flexible monolithic waterproofing membrane. to semi-gloss epoxy coating. When applied at 200 microns
dry film thickness will provide a tenaciously bonded coating
Part ID Description
controlling the transmission of liquid moisture.
730730 EMER-PROOF ECOFLEX 20L
Part ID Description
405015 GREY 20L KIT
proofex details
Polyfab ld 7230w
Part ID Description
Part ID Description 707071 PROOFEX DETAIL STRIP 10M
771193 POLYFAB LD 7230W 1.27X1M 707072 PROOFEX EXT CORNER (200X200X200MM)
707073 PROOFEX INT CORNER (200X200X200MM)
707077 PROOFEX L SECTION 10M
707075 PROOFEX LM 28KG
Waterproofing Industry I 7
liquid / torch applied accessories
Emer-Proof Drain V
Dimpled protection and drainage membrane in high-density
Torch APPLIED accessories
extruded polyethylene with continuous filament yarn.
Uses
Emer-Proof Drain V is ideal for the protection of foundations and Helasto-ring
is perfect for “dry” roof gardens, as it replaces the traditional Plastic support ring for concrete pavers with
aggregate draining layer and speeds up the work, making it less leveling adjustment.
expensive and reducing both the weight and thickness of the
roof garden. Part ID Description
771197 HELASTORING
Part ID Description
771198 HELASTORING LEVELLER
743072 EMER-PROOF DRAIN V 2M X 20M ROLL
Impraboard
Polyethylene coreflute board for low duty membrane
protection.
One Way Vents
Vapour relief roof vents for Index bituminous
Part ID Description
membranes.
771079 IMPRABOARD 1830 X 1220
Uses
Vapour relief vents are used in conjunction with Index
venting base sheet layers in a multi layer bituminious roof
Gas Torch membrane system.
For use with torch on membranes.
Part ID Description
Part ID Description 771183 ONE WAY VENTS
SMALL GAS TORCH, INCLUDING HOSE AND
742082
REGULATOR
LARGE GAS TORCH, INCLUDING HOSE AND
742092
REGULATOR
771196 GAS TORCH HEAD LARGE
771195
771207
GAS TORCH HEAD SMALL
GAS TORCH STEM LONG 480MM
Super Non-Return Pipe Union
Roof outlets for torch on.
771206 GAS TORCH STEM SHORT 220MM
Part ID Description
771192 SUPER NON-RETURN PIPE UNION 100MM
Part ID Description
771200 HDPE ROLLER
Uses
INDEX MINERAL CHIPS Parchem Pressure Seal Flashing is used to seal and flash
Part ID Description
the edge of Index membranes.
771202 INDEX MINERAL CHIPS GREEN 5KG
Part ID Description
771201 INDEX MINERAL CHIPS GREY 5KG
752016 PRESSURE SEAL FLASHING 3M LENGTHS
Plastic
Part ID Description INDEX BITUMEN PRIMER
GD-FILMO450200 PLASTIC HIGH IMPACT ORANGE 2MX4M Bitumen primer for all torch applied Index membranes.
GD-FILMHI PLASTIC HIGH IMPACT BLACK 2MX4M
GD-FILM PLASTIC MEDIUM IMPACT BLACK 2MX4M Part ID Description
742105 INDEX BITUMEN PRIMER 20L
Uses
Rollbase Fidia Mineral may be used as the top layer in a two layer
Polyester fabric backed base sheet, for heat sensitive membrane system or as a single roof membrane for both
substrates, in multi-layer torch-on membrane systems. new and renovation work.
Uses
Uses
Argo P is used as a continuous waterproofing membrane
Defend H is always applied as the last waterproofing
for foundations, basements, tunnels, roofs, etc, as an
layer in contact with the earth for gardens, foundations,
economical single layer membrane or as the base layer in
underground garages and tunnels covered with soil, road
multi-layer systems.
structures and roofs under gravel etc.
Part ID Description
Part ID Description
742230 ARGO P 3MM
771184 4MM 1M X10M ROLL
Waterproofing Industry I 9
torch applied membranes / cementitious membranes cementitious
Part ID Description
751003 VANDEX ELASTICIZER PK75 10KG PAK
Proteaduo P
High performance 4 mm thick torch applied Vandex Cemelast
waterproofing membrane with multilayer composite Flexible, surface applied, cement based render,
polymer bitumen and reinforcement waterproofing barrier for positive and negative water
pressure applications.
Uses
Proteaduo/P has been developed as a waterproofing Uses
membrane where high mechanical resistance, elasticity, Vandex Cemelast is excellent for solving the problem of
thermal stability and durability is required. water seepage through concrete and masonry where live
cracks are present in both new and old structures.
Part ID Description
742012 PROTEA DUO P COMPOSITE WATERPROOFING Part ID Description
751009 VANDEX CEMELAST 9KG
Uses Uses
A waterproofing membrane which consists of distilled Vandex Concrete Grey can be applied to either the pressure
bitumen for industrial use, with a high content of or non-pressure faces of concrete and is excellent for
elastomeric and plastomeric polymers. solving the problem of water seepage through porous or
cracked concrete in both new and old structures.
Part ID Description
742011 BASE SELF ADH. WATERPROOFING Part ID Description
751011 VANDEX CONCRETE GREY 25KG
cementitious membranes
Vandex Plug
Vandex BB75-Z Rapid setting, permanent plugging of water seepage
Surface applied, cement based render, waterproofing through porous concrete and fast flowing water through
barrier for positive and negative water pressure cracks and construction joints in concrete and masonry.
applications.
Uses
Uses
Applications include plugging in-situ and precast concrete
Vandex BB75-Z is a cementitious membrane and does segments in tunnels, water storage tanks, sewerage mains
not rely on crystal growth to achieve its waterproofing. As and processing tanks, basements, below ground car parks,
a result, BB75-Z can be used on most masonry surfaces, access chambers, building foundations and mines.
including sandstone, provided that the surfaces are
adequately prepared.
Part ID Description
751006 VANDEX PLUG 15KG
Part ID Description
751005 VANDEX BB75-Z 25KG
Uses Uses
Vandex Uni Mortar 1-Z is a surface applied, waterproof Adhesive A922 is specifically formulated for the bonding
cementitious mortar for reprofiling concrete and masonry of polystyrene foam to various substrates. Also suitable for
which does not rely on crystal growth to achieve its bonding many plastics to various materials.
waterproofing. As a result, Vandex Uni Mortar 1-Z can
be used on most masonry surfaces, including sandstone, Part ID Description
provided that the surfaces are adequately prepared. 900024 ADHESIVE A922 20L
Part ID Description
751008 VANDEX UNI MORTAR 1-Z 25KG sealants range
VANDEX BRUSHES Emer-Seal PU25
For applying Vandex Concrete Grey slurry. High performance, flexible, one component,
polyurethane joint sealant.
Part ID Description Uses
751015 VANDEX BRUSHES SHORT HANDLE
Sealing joints in concrete panels, fibrous cement
products, external cladding panels, blockwork and
brickwork. Also in sealing joints around aluminium and
timber door and window frames and between metal.
VANDEX CONSTRUCTION JOINT Also suitable for sealing sawn joints up to 10 mm wide in
concrete floors and pavements.
TAPE
Waterproof joint bandage for moving joints. Used with Part ID Description
Vandex BB75E-Z or Cemelast.
620555 EMER-SEAL PU 25 BEIGE 600ML (20/CTN)
620545 EMER-SEAL PU 25 BLACK 600ML (20/CTN)
Part ID Description
620525 EMER-SEAL PU 25 CONC.GREY 600ML (20/CTN)
751010 VANDEX CONSTRUCTION JOINT TAPE
620560 EMER-SEAL PU 25 DRIFTWOOD 600ML(20/CTN)
620535 EMER-SEAL PU 25 SANDSTONE 600ML (20/CTN)
620530 EMER-SEAL PU 25 WHITE 600ML (20/CTN)
Emer-Seal MS
Adhesive A901 One part elastomeric high performance paintable
sealant.
General purpose brush applied contact adhesive.
Uses
Uses
Sealing joints in concrete panels, marble, granite
Adhesive A901 is a general purpose brush applied contact blockwork and brickwork. And also for use in sealing
adhesives. Based on polychloroprene, Adhesive A901 joints around aluminium and timber door and window
is formulated for fast, efficient bonding of decorative frames and between metal and some plastics.
laminates to timber substrates.
Part ID Description
Part ID Description
620515 EMER-SEAL MS GREY 600ML SAUSAGE
900006 ADHESIVE A901 20L
Waterproofing Industry I 11
sealants concrete
Part ID Description
EMER-SEAL CON SILICONE HM CON.GREY
610375
600ML Hilastic 66
Mould and fungus resistant, flexible, one-component
Plastiseal silicone rubber sealant for bathrooms & kitchens.
Rubberised bitumen, mastic joint sealant compatible with Uses
bitumen based membranes. Hilastic 66 is a one-component, non-acid, gun applied silicone
Uses rubber sealant which cures rapidly to form a durable, watertight
seal.
For sealing joints in retaining walls, roofing (sealing horizontal
chases, flashings, gutterings and sheet laps), sealing
Part ID Description
terminations of bitumen based waterproofing membranes.
610321 HILASTIC 66 WHITE 300G (20/CTN)
Part ID Description
600222 PLASTISEAL 600ML
hilastic 88
Neutral cure, one-component silicone sealant, for
Flamex PU sheet metal lap joint, gutters, downpipes, etc.
Emer-Seal CR
Lexel
Highly chemical resistant, fast cure, durable, one
component joint sealant. Clear, all purpose gap sealant for interior and exterior use.
Uses Uses
For sealing expansion and construction joints exposed to The high clarity of Lexel (up to 19 times clearer than translucent
aggressive chemical environments. silicone sealants) make it ideal for a wide range of gap filling
and joint sealing applications where a high clarity sealant is
Part ID Description required. Uses include, trim, countertops, splashbacks, sinks,
tile thresholds, windows, doors, eaves, roof tiles, guttering,
610501 EMER-SEAL CR CONCRETE GREY 600ML
vents, ductwork, flashings and skylights.
Part ID Description
Time saving – its flexibility, elasticity and round shape 2200560 HYDROTITE DSS0220 ADH BACK /LM
allows quick, efficient placement into both even and 2200550 HYDROTITE CJ0725-3K ADH / LM
uneven joints. It can be stretched, squeezed or bent to 2200555 HYDROTITE CJ1020-2K ADH /LM
conform to irregular surfaces. One size of diameter foam
can be used in a range of joint sizes.
PVC Waterstops
Optimal sealant curing – open cell construction allows air
Centrally and externally placed, pvc waterstop profiles
to reach both sides of the sealant, ensuring uniform curing.
for use in cast in-situ concrete.
Part ID Description
Part ID Description
665200 EMER-SEAL BACKING ROD 16MM X 150M ROLL
720301 SUPERCAST H/F 150MMX15M ROLL
665201 EMER-SEAL BACKING ROD 22MMX100M ROLL
720302 SUPERCAST H/F 200MMX15M ROLL
665202 EMER-SEAL BACKING ROD 29MMX60M ROLL
720303 SUPERCAST H/F 250MMX12M ROLL
665203 EMER-SEAL BACKING ROD 38MMX30M ROLL
720330 SUPERCAST R/G 'R' 150MMX12M ROLL
665204 EMER-SEAL BACKING ROD 50MMX20M ROLL
720340 SUPERCAST R/G 'R' 200MMX12M ROLL
Waterproofing Industry I 13
industrial flooring too
Part ID Description
323105 NITOBOND SBR 20L
323115 NITOBOND SBR 200L
Durafloor TC PLUS
Trafficable Coating System
Durafloor Level Prime
Uses
Concentrated, high performance primer for
cementitious underlays. To provide a hard wearing surface, reduce noise and
improve the appearance of multi-storey car park floors
USES and other trafficable areas in both new construction and
Durafloor Level Prime is the recommended primer for the refurbishment projects. Available as an external waterproof
Cemptop XD, GP Advanced, Durafloor Leveltop, Leveltop system for exposed car park decks and a wearing coat
Rapid and Levelbase. system for intermediate car park levels, basements and
other internal trafficable areas.
Part ID Description
480005 DURAFLOOR LEVEL PRIME 1L Part ID Description
480017 DURAFLOOR LEVEL PRIME 20L 405750 PRIMER BASE 10KG KIT
480016 DURAFLOOR LEVEL PRIME 5L 405751 PRIMER HARD 10KG KIT
405752 MEMBRANE BASE KIT 15KG
405753 MEMBRANE HARD KIT 15KG
405754 BODY COAT BASE 20KG KIT
405755 BODY COAT HARD 20KG KIT
Cemtop GP Advanced 405756 T/COAT MED GRY BASE 10
High performance floor underlay, self smoothing, levelling 405757 T/COAT ALL COLOUR HARD
mortar for carpet / tiles (2-50 mm thickness) with enhanced 405758 T/COAT SP COLOUR BASE
flow properties for fast and easy application. Please contact your nearest branch regarding aggregate
Uses options for Durafloor TC Plus.
Cemtop GP Advanced is designed as a heavy duty underlay
which forms a smooth, hard surface for a variety of floor
finishes including carpet and ceramic tiles.
Part ID Description
430088 CEMTOP GP ADVANCED 18KG
Part ID Description
430105 DURAFLOOR LEVELTOP RAPID 20KG
MH-CWT MH-WTT
Part ID Description
MH-CWT WIRE TWISTER - SPIRAL DRIVE TYPE
MH-WTT WIRE TWISTER - HAND TWIST - ABS MATERIAL
CLUB/MASH HAMMERS
Part ID Description
MH-FS150 FLOOR SCRAPER - 150MM HEAVY DUTY - ORANGE
MH-FS200 FLOOR SCRAPER - 200MM HEAVY DUTY - ORANGE
Part ID Description
MH-FS300 FLOOR SCRAPER - 300MM HEAVY DUTY - ORANGE
MH-238F CLUB HAMMER - 3LB - FIBREGLASS HANDLE
MH-FS150SB APARE BLADE - SUIT 150MM SCRAPER
MH-FS200SB SPARE BLADE - SUIT 200MM SCRAPER
MH-FS300SB SPARE BLADE - SUIT 300MM SCRAPER
MH-HDFS200 HEAVY DUTY FLOOR SCRAPER - 200MM
MH-HDFS200SB HEAVY DUTY FLOOR SCRAPER - 200MM - SPARE BLADE
DEMOLITION HAMMERS
CONCRETE RUBBING BRICKS
MH-SLEDGE6
MH-DH4F
Waterproofing Industry I 15
tools & equipment too
MALLET - FIBREGLASS HANDLE PRY BAR
Part ID Description
MH-MPB-56 WAREHOUSE LOADING BAR - 1500MM X 30MM
Part ID Description
MH-MALLET24 FIBREGLASS HANDLE MALLET - WHITE HEAD NON-MARKING
END CUTTING NIPPERS
MH-SLEDGE8 MH-SLEDGE6
Part ID Description
MH-EN200 200MM END CUTTING NIPPERS
MH-EN280 280MM END CUTTING NIPPERS
Part ID Description
MH-SLEDGE6 SLEDGE HAMMER - 6LB - 450MM WOOD HANDLE - HICKORY
MH-SLEDGE8 SLEDGE HAMMER - 8LB - 900MM WOOD HANDLE - HICKORY ROD CUTTER & BENDER
MH-SLEDGE10 SLEDGE HAMMER - 10LB - 900MM WOOD HANDLE - HICKORY
MH-SLEDGE12 SLEDGE HAMMER - 12LB - 900MM WOOD HANDLE - HICKORY
MH-M2824
BUILDERS BUCKETS
Part ID Description
MH-M2818 WRECKING BAR 450MM - 18IN
MH-M2824 WRECKING BAR 600MM - 24IN
MH-M2830 WRECKING BAR 750MM - 30IN
MH-M2836 WRECKING BAR 900MM - 36IN
Part ID Description
MH-M3362 SPUD BAR - 1.8M X 25MM - HEX
MH-M3368 SPUD BAR - 1.8M X 30MM - HEX
HEAVY DUTY ELECTRICAL LEADS
Part ID Description
MH-HS16 HARD POINT - 400MM
Part ID Description
SPONGES MH-PSC25 PAINT SCRAPER - WOOD HANDLE - 25MM
MH-PSC38 PAINT SCRAPER - WOOD HANDLE - 38MM
MH-PSC50 PAINT SCRAPER - WOOD HANDLE - 50MM
MH-PSC75 PAINT SCRAPER - WOOD HANDLE - 75MM
MH-PSC100 PAINT SCRAPER - WOOD HANDLE - 100MM
MH-PSC125 PAINT SCRAPER - WOOD HANDLE - 125MM
Part ID Description
MH-JS JUMBO SPONGE - 200 X 125 X 75MM
MH-JS2 KIDNEY SHAPE SEA SPONGE 290 X 170 X 75MM - XLARGE
CABLE TIES - UV STABALISED
MH-JS3 JUMBO SPOMGE - 300 X 200 X 100MM TILERS TYPE
SCISSORS
Part ID Description
Part ID Description
MH-CT15036 150MM X 3.6MM - BLACK UV - PACK 100PCS
MH-MHSS STAINLESS STEEL SCISSORS - COMFORT GRIP
MH-CT20048 200MM X 4.8MM - BLACK UV - PACK 100PCS
MH-CT25048 250MM X 4.8MM - BLACK UV - PACK 100PCS
MH-CT30048 300MM X 4.8MM - BLACK UV - PACK 100PCS.
SNAP BLADE KNIFE MH-CT37048 370MM X 4.8MM - BLACK UV - PACK 100PCS
MH-CT45080 450MM X 8.0MM - BLACK UV - PACK 100PCS
MH-CT55080 550MM X 8.0MM - BLACK UV - PACK 100PCS
Part ID Description
RAKES
MH-RT349 SNAP BLADE KNIFE - 18MM - AUTO LOCK
PAINT BRUSHES
Part ID Description
MH-MR ALLOY LANDSCAPE 36 TOOTH RAKE 915MM WIDE - F/G HANDLE
Part ID Description
MH-PB25 PAINT BRUSH - 25MM
MH-PB40 PAINT BRUSH - 40MM
MH-PB50 PAINT BRUSH - 50MM
MH-PB75 PAINT BRUSH - 75MM Part ID Description
MH-PB100 PAINT BRUSH - 100MM MH-GT12 6LB ROAD PICK - HEAD ONLY - CHISEL AND POINT
MH-TH5 5LB MADDOCK HEAD - CUTTER END
Waterproofing Industry I 17
tools & equipment too
MH-27600
Part ID Description
HANDLE TO SUIT - MH-U155
MH-8-100MFY BRAIDED BRICKIES LINE - NO 8 X 100M FLURO YELLOW
Part ID Description
MH-8-100MFP BRAIDED BRICKIES LINE - NO 8 X 100M FLURO PINK
MH-28600 HI GENIE HARD POLY FILL BROOM - 600MM
MH-12-100MFY BRAIDED BRICKIES LINE - NO 12 X 100M FLURO YELLOW
MH-27600 HI GENIE MEDIUM POLY FILL BROOM - 600MM
MH-12-100MFP BRAIDED BRICKIES LINE - NO 12 X 100M FLURO PINK
MH-12-500MFY BRAIDED BRICKIES LINE - NO 12 X 500M FLURO YELLOW
Part ID Description
MH-BL526 JUMBO UTILITY BRUSH - TAMPICO FIBRE - RED HANDLE Part ID Description
MH-258 BRICK CARRIER - CAD PLATED
DAIRY SCRUB
carpenters pencils
Part ID Description
MH-34049 DAIRY SCRUB - POLY FILL - STIFF BRISTLE
Part ID Description
MH-314MED CARPENTERS PENCIL - MEDIUM - RED
BRICK ACID BRUSHES MH-314HARD CARPENTERS PENCIL - HARD - GREEN
Part ID Description
MH-BL119 ACID BRUSH - PLASTIC STOCK NYLON FIBRE FILL
Roller Covers
BOLLARDS Part ID Description
MH-RC938 ROLLER COVER - 10MM NAP - 230MM
SA6001 ROLLER COVER 460mm FINE TEXTURE
SA6002 ROLLER COVER 270X 20mm PROD CODE 3313
SA6003 ROLLER COVER 230M LAMBSWOOL COVERS
wheelbarrows
Part ID Description Various models available
MH-BOLLARD6 BOLLARD & 6KG RUBBER BASE
MH-BOLLARD8 BOLLARD & 8KG RUBBER BASE
KNEE PADS
Part ID Description
MH-ST50 BARRICADE TAPE - 50 METRE ROLL X 75MM
MH-ST100 BARRICADE TAPE - 100 METRE ROLL X 75MM
MH-ST500 BARRICADE TAPE - 500 METRE ROLL X 75MM
Waterproofing Industry I 19
trade stores
We’ve got
the gear
you need
The range of products will vary by location so please contact your nearest store for the range of products in stock. P: 1300 737 787 www.parchem.com.au