Professional Documents
Culture Documents
IP Classification PDF
IP Classification PDF
To help the design engineer identify the degree of protection provided by an enclosure, EN 60.529 (10/91 / IEC 529 (11/89) (International
Electrotechnical Commission) was introduced.
Both harmonised standards classify the extent to which an enclosure will resist the ingress of solid bodies and water under designated tests.
After successful testing the enclosure will be allocated a classification code with the letters IP (International Protection) prefixing that code.
IP 55 W
Code letters
International Protection
300
min. 1m
.5
ø 6.3 ø 12
200
200
30
°
15°
15°
Non protect. 0 IP 00 IP 01 IP 02 10l/min 10l/min 12.5l/min 100l/min
80kN:m2 80kN:m2 30kN:m2 100kN:m2
Protected against IP 10 IP 11 IP 12 IP 13
solid objects greater
than Dia. 50 mm. 1
Protected against
solid objects greater
than Dia. 12 mm. 2 IP 20 IP 21 IP 22 IP 23
Protected against
solid objects greater
than Dia. 2.5 mm. 3 IP 30 IP 31 IP 32 IP 33 IP 34
Protected against
solid objects greater
than Dia. 1.0 mm. 4 IP 40 IP 41 IP 42 IP 43 IP 44 IP 45 IP46
Dust protected. 5 IP 54 IP 55 IP 56
Dust-tight 6 IP 65 IP 66 IP 67 IP 68
Page 130
Swing Frames
Page 135
Lighting
Page 137
Mounting Materials
Page
130 Thermal Management
135 Swing Frames
137 Lighting
140 Mounting materials
Page 140
Eldon filter fans and exhaust filters are installed with a time-saving click- Eldon filter fans and exhaust filters are installed with a time-saving click-
in system. Installation requires one cut-out and no screws.All models in system. Installation requires one cut-out and no screws.
are UL approved. 230V, 50/60Hz For outdoor use. UL approved 230V, 50/60Hz
For door mounting in accordance with VDE 0113 (EN 60204). UL For door mounting in accordance with VDE 0113 (EN 60204). UL
approved. approved.
ECR, Fan heater with thermostat DTD, Cooling units, top/roof mounting
IP 20 IP 54
DTS, Cooling units, side- and door mounting EGK, Anti condensation heater, small
IP 54
Side mounting
Side mounting
H W D Capacity Volt Material Cat.no.
587 390 114 2400 W 230 Mild steel PWS 7002
1350 390 140 3200 W 230 Mild steel PWS 7302
140 3200 W 230 Stainless steel PWS 7302S
For further specific information, please contact your Eldon dealer.
Effectively preventing condensation in enclosures. ClIP for 35 mm DIN rail (EN 50022). Vibration proof fixing is fitted as
Snap-mounting for 35 mm DIN rail. standard.
Capacity: 35m3/h. Operating voltage: AC/DC 110-250V max 265V
Durability: 50.000 hours at 25° C(77° F). Surface temperature: 75°C Approvals: VDE, UL File 150057.
(400W). Protection class II.
Working voltage: 230 V, 50-60 Hz. Width 70 mm Depth 50 mm.
Material: Aluminium. Finish: Black.
Approvals: VDE, UL File E150057
Watt Volt Cat.no. Capacity L (mm.) Weight Cat.no.
250 220-230 EGL 250 15 W 65 0.3 EHG 015
115 EGL 250UL 115 30 W 65 0.3 EHG 030
230 EGL 250UL 230 45 W 65 0.3 EHG 045
400 220-230 EGL 400 160 W 140 0.5 EHG 060
115 EGL 400UL 115 75 W 140 0.5 EHG 075
230 EGL 400UL 230 100 W 140 0.5 EHG 100
Other voltages available on request. 15 W 220 0.8 EHG 150
High-performance space saving heater with fan prevents formation of ClIP for 35 mm DIN rail (EN 50022).
condensation and provides an evenly distributed interior air temperatu- Normally opened 5A
re in enclosures.Working Voltage: 230V 50/60Hz (AC120V and DC 48V Normally closed: 10A
on request) 10°C - 60°C
Durability: 50.000 hours at 25° C(77° F). 4 x 2.5 mm2
Airflow min.: 35m3/h, free flow (100W, 150W) 250 V
Airflow min.: 108m3/h, free flow (200W, 300W, 400W) Type of contact: Chane-over with quick-acting contact.
Connection heater: 3-pole screw connector 2.5 mm2 Hysteresis: 0.5 K
Connection axial fan: 2-pole screw connection 2.5 mm2 (L2/N2)
Fitting position: ClIP for 35 mm DIN rail EN 50022
Approvals: UL File E187294
Electronic
Weight H W D Cat.no.
with MP 67 50 37 ETR 200
Capacity Dim. (Kg) Cat.no.
100 W 80 x 112 x 22 mm 0.4kg EHV 100
150 W 80 x 112 x 22 mm 0.4kg EHV 150
200 W 119 x 151 x 22 mm 0.5kg EHV 200
300 W 119 x 151 x 22 mm 0.5kg EHV 300
400 W 119 x 151 x 22 mm 0.5kg EHV 400
*) Capacity at 20ºC (68ºF) ambient temperature
H W D Cat.no. Mecanical
67 50 46 ETR 203 H W D Cat.no.
67 50 38 ETF 2000
MDC MDM
b
h
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Cat.no.
MSTD 200
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
W Cat.no.
800 MDTE 800
W Cat.no.
600 SFT 600
800 SFT 800
1000 SFT 1000
Allow the mounting of a swing frame in the full height of a double door
floor standing enclosure without the use of MTD accessory. Material:
3 mm steel plate.
Painted in RAL 7032.
Cat.no.
MDL 01
Description Cat.no. ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Schuko N LTC 75
France LTC 75FR Enclosure lamp, LTCL
Switzerland LTC 75CH
England LTC 75UK
USA/Canada LTC 75USA Spare lamp for LTC. 11 Watt economy lamp,
LTC 75USA is UL approved providing light equivalent to a 75 Watt bulb.
Cat.no.
LTCL 75
Description: For fixed use or with the addition of the accessory LTHC
as a removable hand lamp for more precise illumination. Self-adhesive
or screw fixing support. Provided with a PIR movement sensor. Appr. 3
Description: For fixed use or with the addition of the accessory LTHC min. fixed switch-on-duration.
as a removable hand lamp for more precise illumination. Self-adhesive Operating voltage: 230V, 50Hz.
or screw fixing support, provided with a press button on/off switch. Power: 20 W (± 100W bulb), lamp included.
Operating voltage: 230V, 50Hz. DC 120V on request. Lamp: Energy-saving, E27 socket. 10000h live time.
Power: 20 W (± 100W bulb), lamp included. Connection: 6 pole screw connector 2.5 mm2, for power, second lamp
Lamp: Energy-saving, E27 socket. 10000h live time. in parallel and external door switch. For power, second lamp in parallel
Connection: 6 pole screw connector 2.5 mm2, for power, second lamp and external door switch.
in parallel and external door switch. Housing: Plastic, impact resistant, UL94VO.
For power, second lamp in parallel and external door switch.
Housing: Plastic, impact resistant, UL94VO. Cat.no.
LTHM
Cat.no.
LTH
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
LTL, Enclosure light
Hand lamp cable, LTHC
IP 20
Mains cable to transform the LTH to an hand lamp. Provided with wall
holder. Cable length: 2 m.
Cat.no.
LTHC 02 Description: Fluorescent lamp, equipped with switch, electronic star-
ter, integrated socket and a protection cap. A male GST 18/3 connec-
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ tor is provided for the connection to the power on one side and by a
pass-through circuit a female connector allows a further connection on
Door switch leads, DSWC the other side. An additional connector ST 17/2 allows the command
of the lamp by a doorswitch.
Standard socket:120/230 V/ 50/60Hz / 16A Schuko. Other country
specific sockets available on request.
Pack quantity: 1 piece with tube and fixing devices.
Size: 14W 38 x 97 x 400 mm
18W 38 x 97 x 630 mm
Cable (3 x 1.5 mm2) with female GST 18/3 connector at one end for the Pack of 5 female GST 18/3 connectors.
connection to mains power. Length: 3 m.
Pack quantity: 5 pieces.
Cat.no.
Cat.no. COF 05
CLF 3005
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Cable (3 x 1.5 mm2) with male GST 18/3 connector at one end for the Pack of 5 male GST 18/3 connectors.
connection to power outlet of any device or further enclosure circuit.
Length: 1 m.
Cat.no.
Pack quantity: 5 pieces.
COM 05
Cat.no.
CLM 1005
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Description Cat.no.
Schuko LPS 10
France LPS 10 FR
Switzerland LPS 10 CH
England LPS 10 UK
USA/Canada LPS 10 USA
Cat.no.
PQF 05 Screws for cage nuts, CNS
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Cage nuts M 6 designed for universal use on the enclosure frame pro-
files and the profile system.
Pack quantity: 50 pcs.
Thread Cat.no.
M6 CNM 615
M6 CNM 620
For optimal pressure, it is recommended that 2 plugs are installed dia- M8 CNM 815
gonal to each other. M8 CNM 820
Mounting: PG 29 thread with union nut. Diameter 65,5 x 30,5 mm.
IP 45.
Material: ABS/PC, grey.
Pack quantity: 2 pieces.
Cat.no.
PVD 02
Mounting rails, CP
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
A large steeel document pocket fixed directly onto the door frame. Self adhesive, for DIN A4 format.
Usable depth: 68 mm. Usable depth: 30 mm.
Material: 1.5 mm steel plate. Colour: grey
Finish: structure powder paint, RAL 7032. Material: Thermoplastic
Pack quantity: 1 piece with mounting material.
Cat.no.
W Cat.no. DRA 04
1000 (double door x 2) DRB 500
600 DRB 600
800 DRB 800
1000 DRB 1000
23.5
31
With this kit the glazed doors ADA can be used as viewing windows on To replace the standard steel door. Can be used in combination with
any enclosure surface, to provide protection for displays and other swing frame, modular chassis or inner door. The 3 mm DIN lock can be
control elements. replaced by any optional insert or handle.
Material: Anodised aluminium.
Protection: IP 54. Acrylic glass 3 mm.
Depth Cat.no. Pack quantity: 1 piece with mounting material.
23,5 mm MSA
H W Cat.no.
300 300 ADA 03030
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
400 300 ADA 04030
400 ADA 04040
Mounting kits, MSB 600 ADA 04060
500 300 ADA 05030
400 ADA 05040
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
With This kit the glazed doors ADAB can be used as viewing windows
on any enclosure surface, to provide protection for displays and other
control elements.
Depth Cat.no.
50 mm MSB
H W h w Cat.no.
600 400 522 322 ADAB 06040
600 522 522 ADAB 06060
800 522 722 ADAB 06080
700 500 622 422 ADAB 07050
800 600 722 522 ADAB 08060
IP 54/65
Volt Cat.no.
24V SL50 AM24
115V SL50 AM115
230V SL50 AM230
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
230 V ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Colour Cat.no.
Transparent SL50 BCL 230 Led bulbs, SL-LED
Yellow SL50 BYE 230
Amber SL50 BAM 230
Red SL50 BRE 230
Green SL50 BGR 230
Blue SL50 BBL 230
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Tubular stand, SL-T
Cat.no.
SL50 BG
With bracket
H Cat.no.
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 100 SL50 T100
250 SL50 T250
Tube gasket, SL-TG 400 SL50 T400
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
For IP 65
Package quantity: 5 pieces
Cat.no.
SL50 TG
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Cat.no.
SL50 W
Cat.no.
SL50 MG