Ass Room

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

PHN INDUSTRY SDN BHD

PLANT ENGINEERING DEPARTMENT


SECTION: FACILITIES MAINTENANCE
PLANT: PHN PEGOH
DATE: 03.01.2020

TO STUDY, DESIGN, REPAIR, SUPPLY, AND COMMISIONING TO CONSTRUCT AN ASEMBLY AND


TITLE:
MECHINING ROOM

TOTAL PRICE REMARKS/PURPOSE


NO DESCRIPTION QTY UNIT PRICE/UNIT
(RM) (PLS PUT ATTACHMENT IF REQUIRED)
To propose, design and construct wall partition Partition Height = 12ft & 10ft ceilling
along perimeter with gypsum board c/w height
1 neccessary support structure hollow square bar 28 m.sq Type: Half Glass. 1 Side wall use existing
and fitting. QC inspection room
Approx. height = 12ft. 4.6m(W) x 6.0m(L)
Construct ceiling board with 2ft x 4ft c/w Tee Option: Using plaster ceiling type
aluminium suspension structure, and others
2 35 m.sq
necessary fitting. Ceiling height from floor level
10ft
Propose, supply and install set of Lamp T5 Brand: Osram / Philips.
3 6 Set
(double bulb) with accessories (1set/6m.sq)
Supply and install 6ft x 7ft double leaf door Door closer brand: St Guchi
4 with half glass c/w locking, door closer and 1 Lot
others related accessories.
Supply and install cassette type of 2HP Brand: Daikin
5 airconditioner c/w piping and related 2 Set Remote type: Hard wired remote
accessories. controller
Supply and install emergency light c/w Brand: Econlite
6 2 Set
wiring and related accessories
Supply and install exit sign c/w wiring Brand: Econlite
7 1 Set
andnrelated accessories
Supply and install ceiling mounted Brand: KDK
8 1 Set
ventilating fan Model: 20CQT1
To supply and install 13A 240V Switch
9 10 Unit
Socket Outlet
To supply, lay and install cable 1.5mm² for 1.5mm² for lighting & general power.
general power and lighting and 2,5mm² power 2.5mm² for aircond supply
10 1 Lot
aicond power supply single core tapping from
nearby sub DB
To supply, lay and install 3phase sub DB 63Amp
c/w ELCB and RCCB to catter load such as
11 lighting, general power and aircond. Includes 1 Lot
lay main cable from Main DB to sub DB

To supply, lay and install 4 unit springkler head 3 springkler point (1 point/13m.sq)
c/w lay piping from main sprinkler pipe,
12 1 Lot
support bracket, kitz stop valve and painting
pipe (Signal Red)
To supply and install air supply complete with
piping from main air supply pipe until drop
13 point at assembly process room. 3 air supply 3 Lot
outlet (female type) for each drop point

You might also like